Top 9 Winch Plate JK – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

Smittybilt 2804 Textured Black Winch Mounting Plate for Jeep Stock Front Bumper

#ad
Smittybilt #ad - Raised winch mount, for roller fairlead. Product type : vehicLE BUMPER. Powder coated for long lasting corrosion resistance. Tough 3/8 inch plate construction.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height6 Inches
Length39 Inches
Weight30 Pounds
Width18 Inches
Part Number2804
Model2804
WarrantyLimited Warranties Smittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

2. Rugged Ridge

#ad

Steel; 13-18 Jeep Wrangler JK, Rugged Ridge 11543.15 Winch Mounting Plate, Stamped Bumper

#ad
Rugged Ridge #ad - Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts and accessories like bumpers, wheels, lift kits, interior accessories, floor liners and more for varying Jeep models. Winch plate for jeeps: the versatile two-piece design allows Jeep owners to mount a winch while hiding the vehicle's frame for a sleeker look.

Features an e-coated and powder coated finish for tough corrosion resistance. Heavy-duty winch plate incorporates high strength class 109 hardware for secure mounting. Steel winch plate: fits the factory steel front bumpers on the 2013 jeep wrangler 10th Anniversary Rubicon, 2014 Rubicon X, and 2015 Rubicon Hard Rock models.

Note: requires mopar factory fairlead adapter plate - for centered fairlead placement use OE number 82214787 or for off-center fairlead placement use OE number 82214851. Five year warranty: our rugged ridge products are covered by an industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusion.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height6 Inches
Length35 Inches
Weight30 Pounds
Width12 Inches
Part Number11543.15
Model11543.15
Warranty5 Year Limited

3. EAG

#ad

EAG Raised Winch Mounting Plate for OE Factory Bumper Compatible with 07-18 Wrangler JK

#ad
EAG #ad - The factory bumper needs to be modified. Accommodates all standard size winches. Constructed from 1/4" steel. Also the brake canister will need to be relocated. Hardware for installation is included. Mounts to your jk's factory bumper. Use with OE bumper bolt holes. Fit for 07-18 wrangler jk. Able to mount any winch up to 12, 000lbs to your Jeep. Solid steel construction, one-piece fully welded design for extra strength. Durable black powder coating.
BrandEAG #ad
ManufacturerEAG #ad
Height4.72 Inches
Length29.92 Inches
Weight24.8 Pounds
Width10.24 Inches
Part Number51-0489_FBA

4. EAG

#ad

EAG JK Front Bumper with Fog Light Housing and Winch Plate Offroad Fit for 07-18 Wrangler JK

#ad
EAG #ad - The jk wrangler front bumper features a built-in winch plate that is capable of supporting a 12, 000 lb. Heavy duty construction - eag manufactures their wrangler jk unlimited front bumper to exact tolerances from 5/32" thick mild steel sheet and 2" x 0120" steel tubing for superior strength and durability.

Fitment - 2007-2018 wrangler jk 2018-2021 wrangler jl/2020 gladiator JT Dose not fit for 2017 JK Rubicon Recon model. Winch. Fog light housing - our bumpers relocate the stock fog lights to widen their field of vision. Perfect for off-road use - the eag rock crawler front bumper is equipped with 9, 500 lb. Pre-machined attachment points insure flush and simple installation of pre-existing OEM size fog light assemblies.

Black isolaters and washers are included. Rated d-rings on beefy mounts and an aggressive tube over rider with additional light accommodations. Easy installation - Direct bolt-on. Fog lights not included. All necessary hardware and installation instructions are included. High quality textured powder coat for corrosion protection.
BrandEAG #ad
ManufacturerEAG #ad
Height12.2 Inches
Length71.65 Inches
Weight78.82 Pounds
Width16.93 Inches
Part Number51-0328
ModelJJKFB001
WarrantyItems will honor Amazon's Return Policy

5. KUAFU

#ad

Front Bumper w/LED Light Winch Plate Compatible With 2007-2019 Jeep Wrangler JK & Unlimited Rock Crawler

#ad
KUAFU #ad - 2"x0120" steel tubing. Two solid d-ring shackle mounts are welded into the front bumper from the inside and outside for increased strength. Winch plate size 24" x 7.

5". Direct bolt-on on some jeeps you may need to increase hole diameter on Jeep Frame plate. Include two 4. 75 ton d-rings, the total capacity is 9000 lbs. Durable steel construction. Built-in winch plate with wide opening. Powder-coated textured black. Bumper size 56" width x 7. 5" depth. Front bumper with led light winch plate is for 2007-2018 Jeep Wrangler JK & Wrangler Unlimited. Built-in front led lighting as pictured. Winch not included 1/4" thick custom mounting brackets. Ultra-rugged, one-piece fully welded design for extra strength.
BrandKUAFU #ad
ManufacturerKUAFU #ad
Weight9000 Pounds
Part NumberBL644
ModelBL644

6. Hooke Road

#ad

Hooke Road Flip-Up License Plate Holder for Winch Texture Black for Jeep Wrangler YJ TJ JK JKU JL Gladiator JT Tacoma Tundra Ram F150 Pickup Truck

#ad
Hooke Road #ad - Noticedrilling is needed for bolt-on Installation if Your Bumper Doesn't Have Suitable Holes 10 inches. Instatllationthere is no need to drill if your lisence plate installation holes on your front bumper is 10 inches, it only takes a few minutes to install two screws to fix the license plate frame, and then you can install your license plate in a few minutes.

With mounting screws and fixed license plate screw kit. Applicationfits for jeep wrangler front modified bumpers and all pickup truck front modified bumpers. Noteplease make sure the distance of the installation holes on your front bumper is 10 inches or you will need to drill new holes for installation.

Functionyou can manually flip the license plate holder anytime, anywhere without using any tools. Constructionhooke road front license plate Mount is made of high-density steel with texture black Powder Coat Finished, corrosion resistance, high temperature resistance, high strength, and strong impact resistance.
BrandHooke Road #ad
ManufacturerHooke Road #ad
Part NumberQP.BXG-098

7. oEdRo

#ad

Compatible for 2007-2018 Jeep Wrangler JK & Unlimited, Rock Crawler Bumper with Winch Plate Mounting & 4 x LED Lights & 2 x D-Rings Off Road, OEDRO Front Bumper

#ad
oEdRo #ad - Durable materials-this front bumper is made with durable 5/32" steel sheets and 2"X0120" steel tubing. Extremely bright- built-in high power 36w 2pcs & 40w 2pcs flood beam fog lights. They brighten up the road, perfect for any night time adventure.

High accuracy laser measuring and cutting makes sure that the bumper has a correct 360° fit. Bolts directly on to factory holes, no additional drilling or cutting required. What you get- front bumper, 1 set of screws, & 1 x instruction manual. Never rusts- the bumper has a high quality textured black powder coat and along with our advanced laser welding technology, prevents rust from occurring.

If you have any questions or problems, 2 x D-rings, 4 x Led Lights, please contact us. It not only makes your car look tougher but it also protects your car in collisions. The packaging is specially designed with 7-layers of cardboard to avoid your package being damaged during transportation. Perfect fitment -fits for 07-18 jeep wrangler jk, unlimited, sahara & rubicon.
BrandoEdRo #ad
ManufacturerOEDRO #ad
Height9.84 Inches
Length63.38 Inches
Width13.39 Inches
Part NumberYO0301R007
ModelOETEWB-0006
WarrantyLimited Lifetime Warranty

8. Rugged Ridge

#ad

Rugged Ridge 11543.13 Spartacus Winch Mounting Plate; 07-18 Jeep Wrangler JK

#ad
Rugged Ridge #ad - Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts and accessories like bumpers, wheels, interior accessories, lift kits, floor liners and more for varying Jeep models. Features an e-coated and powder coated finish for tough corrosion resistance.

Off-road accessories: get serious about off-roading with a variety of tow hooks, tube doors, hitches and kits that give you a way out in sticky situations; We offer winches, recovery gear, mirror kits and more accessories. Steel winch plate: fits the rugged ridge Spartacus steel front bumpers. Heavy-duty winch plate incorporates high strength class 109 hardware for secure mounting.

Winch plate for jeeps: the versatile two-piece design allows Jeep owners to mount a winch while hiding the vehicle's frame for a sleeker look. Five year warranty: our rugged ridge products are covered by an industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusion.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height6 Inches
Length35 Inches
Weight30 Pounds
Width12 Inches
Part Number11543.13
Model11543.13
Warranty5 Year Limited

9. oEdRo

#ad

Upgraded Textured Black Rock Crawler Off Road Star Guardian Design, OEDRO Front Bumper Combo Compatible for 07-18 Jeep Wrangler JK & Unlimited with Winch Plate Mounting & 2 D-Rings

#ad
oEdRo #ad - Durable material-the front bumper manufactured from durable 5/32" steel sheet and 2"X0120" steel tubing, give your car 360° Protection. What you get-1x front bumper fit for jeep wrangler jk, 2x D-rings, mounting hardware Washers, 1 x DIY Installation Manual.

Perfect fitment -fits for 07-18 jeep wrangler jk, sahara & rubicon. If you are not sure whether it can fit or do not know how to install, please contact us before purchase. Exclude 2017 jk rubicon recon & 2018 Wrangler JL Models. The parcel will package with a specially designed 7-layer carton. Original vehicle mould, Unlimited, more precision. Service - buy with confidence! we accept return or change on products damaged during delivery or that have a confirmed manufacturer defect. Never rust-made with high quality textured black powder coat and laser welding procedure, better prevent rust.
BrandoEdRo #ad
ManufacturerOEDRO #ad
Height12.99 Inches
Length66.53 Inches
Weight60 Pounds
Width19.29 Inches
Part NumberYO0301R001-R
ModelBull Bar
WarrantyLimited lifetime warranty