As an Amazon Associate I earn from qualifying purchases.
Rockville #ad - Overload Protection Circuit. 17 18 gauge blue Remote Cable. Subwoofer Level Remote Control. Peak power handling: 400 Watts. 1 rockville rwk10 10 gauge amp installation Kit ANL Fuse Holder 100% Copper RCA.
High level inputs with auto turn-on technology. Enclosure is made out of cast aluminum which stays cool at all times. Features of rwk10: rockville rwk10 10 gauge 2 channel car amplifier wiring installation kit.
Rockville #ad - Gold plated anl heat resistant fuse holder. 4 ohm mono-block class A/B. Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power. Oversize Rockville Shield embroidery.
Frequency response: 15Hz - 20Khz -3Db. Exterior: high quality aviation grade tweed Carpet. Rms power: 400 watts @ 2 ohms. 17' 8 gauge translucent blue super flex Power cable.
Mono, speaker terminal. 17' 16 gauge speaker wire. Dual, high-power, gold-plated push style, high-efficiency 12" Subwoofers. Angled at 15% for near perfect in vehicle bass alignment. Power output: 200 watts rms cea-2006 power @ 4-ohm and 97dba reference: 1watt into 4 ohms. 17" high grade twisted pair 100% copper rca cables.
BOSS Audio Systems #ad - Warranty - boss audio systems provides a powerful 3 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon. Com. Passive radiator – a driver unit that has its motor structure magnet removed, becomes a passive diaphragm. Phase control - phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
You will use the Low-pass filter to primarily keep high notes out of your subwoofers. High level input - speaker level inputs are commonly referred to as high-level inputs. Low level input - line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the CUBE10 with the source unit.
As a result, there is no chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear. Variable bass boost - variable bass Boost allows you to adjust the low bass within the boost range to just the way you like it. It will be used to connect the cuBE10 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Rockville #ad - Satin nickel speaker wire push terminals. 7 split tube loom. Peak power handling: 1400 Watts. 2" 4-layer black aluminum voice Coils Wound with OFC 100% Copper Wire. Mdf enclosure. 4 ohm: 220 watts x 1 channel
Sound Storm Laboratories #ad - High level input - speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the PB8 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Built-in amplifier - a built-in 400 Max watt amplifier powers the 8” subwoofer.
Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Specs - dimensions: 9. 25” x 9. 84” x 11. 54”, weight: 14. 64 lbs. As a result, thus enriching the BASS & making the system more linear. Passive radiator – a driver unit that has its motor structure magnet removed, there is no Chuffing that you would generally get with a ported box, becomes a passive diaphragm. Low level input - line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the PB8 with the source unit.
American Sound Connection #ad - 1 kicker c12 subwoofer single 12" hatchback Sealed Sub Box Enclosure Bundle with Kicker 43DXA125. 2 amp.
Rockford Fosgate #ad - Built in 0°/180° phase switch. Power handling: 300 Watts RMS. New rockford fosgate p300 10 10" 300 Watt Single Powered Subwoofer Sub Enclosure. Subwoofer:**. Closed loop" design ensures optimum performance between woofer, amplifier and enclosure.
MTX #ad - Mono block amplifier: includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure. Add bass: add some bass to your car with the mtx 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power 400-watts RMS for entire enclosure.
Amplifier installation kit: features a 20 foot 8 gauge red power cable, rubber grommets, a 5/16 inch ring terminal, 16 feet of 18 gauge blue turn on wire, 4 inch wire ties, 20, 30 feet of speaker wire, 3, 3 feet of 8 gauge black ground cable, competition high quality fuse holder, a 20 foot high performance RCA interconnect, a Number 10 ring terminal, and a 1/4 inch ring terminal.
High quaility: enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem. Specifications: subwoofer enclosure: max power: 1200 watt; rms power: 600 watt; single 4 ohm voice coils per sub pre wired down to 2 ohm load; Frequency response : 37 150Hz; Dimensions HxWxD : 13. 875 x 29. 625 x 13. 875 inches.
1. Rockville
#adRockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit
#adHigh level inputs with auto turn-on technology. Enclosure is made out of cast aluminum which stays cool at all times. Features of rwk10: rockville rwk10 10 gauge 2 channel car amplifier wiring installation kit.
More information #ad
Package includes: 1 rockville ss8p 400 watt slim under-seat active powered car/Truck Subwoofer Sub. Thd: < 04%. Pwm mosfet power Supply. Adjustable input sensitivity. Fuse rating: Single 15A. Low pass filter: 50hz - 150hz. Heavy duty Mounting Feet. Thermal protection Circuit, Short Protection Circuit. Low level rca input. Phase switch: 0° or 180°. Soft delayed Remote Turn-On.| Brand | Rockville #ad |
| Manufacturer | Rockville #ad |
| Height | 11 Inches |
| Length | 5.4 Inches |
| Width | 14.1 Inches |
| Part Number | SS8P+RWK10 |
| Model | SS8P+RWK10 |
More information #ad
2. Rockville
#adRockville RV12.2B 1200W Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
#adFrequency response: 15Hz - 20Khz -3Db. Exterior: high quality aviation grade tweed Carpet. Rms power: 400 watts @ 2 ohms. 17' 8 gauge translucent blue super flex Power cable.
More information #ad
17' 18 gauge Blue remote cable. 3' 8 gauge clear super flex ground wire. Rockville rv12. 2b dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Mono, speaker terminal. 17' 16 gauge speaker wire. Dual, high-power, gold-plated push style, high-efficiency 12" Subwoofers. Angled at 15% for near perfect in vehicle bass alignment. Power output: 200 watts rms cea-2006 power @ 4-ohm and 97dba reference: 1watt into 4 ohms. 17" high grade twisted pair 100% copper rca cables.
| Brand | Rockville #ad |
| Manufacturer | ROCKVILLE #ad |
| Height | 20 Inches |
| Length | 31.5 Inches |
| Weight | 53 Pounds |
| Width | 20.75 Inches |
| Part Number | RV12.2B |
| Model | RV12.2B |
| Warranty | 1 YEAR |
More information #ad
3. BOSS Audio Systems
#adBOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control
#adYou will use the Low-pass filter to primarily keep high notes out of your subwoofers. High level input - speaker level inputs are commonly referred to as high-level inputs. Low level input - line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the CUBE10 with the source unit.
More information #ad
Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. We strongly encourage professional installation of this product to ensure proper and safe functionality. As a result, there is no chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear. Variable bass boost - variable bass Boost allows you to adjust the low bass within the boost range to just the way you like it. It will be used to connect the cuBE10 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 11.22 Inches |
| Length | 11.22 Inches |
| Weight | 18.61 Pounds |
| Width | 11.22 Inches |
| Part Number | CUBE10 |
| Model | CUBE10 |
| Warranty | Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality |
More information #ad
4. Rockville
#adRockville SK512 Package 12" 1400w Loaded K5 Car Subwoofer Enclosure+DB11 Amp
#adMore information #ad
| Brand | Rockville #ad |
| Manufacturer | ROCKVILLE #ad |
| Height | 8.5 Inches |
| Length | 2.25 Inches |
| Width | 7 Inches |
| Part Number | SK512 PACKAGE |
| Model | SK512 PACKAGE |
| Warranty | 1 YEAR |
More information #ad
5. PIONEER
#adPioneer TS-WX1010A 10” Sealed enclosure active subwoofer with built-in amplifier
#adPIONEER #ad - Size 10" cone. 1 100 watts max power 300 watts nom. Built with high bandwidth high output and low distortion 300-watt class D amplifier.More information #ad
| Brand | PIONEER #ad |
| Manufacturer | Pioneer #ad |
| Height | 16 Inches |
| Length | 20.5 Inches |
| Weight | 16 Pounds |
| Width | 11.5 Inches |
| Part Number | TSWX1010A |
| Model | TSWX1010A |
More information #ad
6. Sound Storm Laboratories
#adRemote Subwoofer Control, Sound Storm Laboratories PB8 Car Subwoofer and Amp Package – Built-in Amplifier, 8 Inch Subwoofer with Passive Radiator
#adMost aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. We strongly encourage professional installation of this product to ensure proper and safe functionality.
More information #ad
Variable bass boost - variable bass Boost allows you to adjust the low bass within the boost range to just the way you like it. Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. Specs - dimensions: 9. 25” x 9. 84” x 11. 54”, weight: 14. 64 lbs. As a result, thus enriching the BASS & making the system more linear. Passive radiator – a driver unit that has its motor structure magnet removed, there is no Chuffing that you would generally get with a ported box, becomes a passive diaphragm. Low level input - line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the PB8 with the source unit.
| Brand | Sound Storm Laboratories #ad |
| Manufacturer | Sound Storm Laboratories #ad |
| Height | 9.25 Inches |
| Length | 9.84 Inches |
| Weight | 16.35 Pounds |
| Width | 11.54 Inches |
| Part Number | PB8 |
| Model | PB8 |
| Warranty | Warranty – Sound Storm provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality |
More information #ad
7. American Sound Connection
#ad1 Kicker C12 Subwoofer Single 12" Hatchback Sealed Sub Box Enclosure Bundle with Kicker 43DXA125.2 Amp
#adMore information #ad
| Brand | American Sound Connection #ad |
| Manufacturer | American Sound Connection #ad |
| Height | 13 Inches |
| Length | 27 Inches |
| Width | 15 Inches |
| Part Number | 43DXA1252-PACK16 |
More information #ad
8. Rockford Fosgate
#adRockford Fosgate P300-10 10" 300W Sealed Powered Subwoofer/Sub Enclosure+Amp Kit
#adMore information #ad
| Brand | Rockford Fosgate #ad |
| Manufacturer | Rockford Fosgate #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 51480 |
| Model | 51480 |
More information #ad
9. MTX
#adMono Block Amplifier, and 8 Gauge Amplifier Amp Complete Wiring Installation Kit, MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box
#adAmplifier installation kit: features a 20 foot 8 gauge red power cable, rubber grommets, a 5/16 inch ring terminal, 16 feet of 18 gauge blue turn on wire, 4 inch wire ties, 20, 30 feet of speaker wire, 3, 3 feet of 8 gauge black ground cable, competition high quality fuse holder, a 20 foot high performance RCA interconnect, a Number 10 ring terminal, and a 1/4 inch ring terminal.
More information #ad
High quaility: enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem. Specifications: subwoofer enclosure: max power: 1200 watt; rms power: 600 watt; single 4 ohm voice coils per sub pre wired down to 2 ohm load; Frequency response : 37 150Hz; Dimensions HxWxD : 13. 875 x 29. 625 x 13. 875 inches.
| Brand | MTX #ad |
| Manufacturer | MTX #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 1 |
| Model | TNP212D2-8GK |
More information #ad
