As an Amazon Associate I earn from qualifying purchases.
1. Xprite #ad
Xprite Wiring Harness with 2 Switches For Rear LED Strobe Chase Light Bars #adXprite #ad
- Wiring harness with 2 switches for Xprite G2/G4/G5/G6 Chase Rear Strobe Lightbars. Package includes: 1 pcs xprite wiring Harness with 2 Switches For LED Chase Rear Strobe Lightbars.
Installation: plug 'n' play Includes a In-Line Switch & Rocker Switch. Note: we are not responsible for any compatibility issues with other brands. Harness length: 4ft Fitment.
2. Dasen #ad
Dasen Laser Rear Lights Rocker Switch 5 Pin On-Off Blue LED Light Toggle Button 20A/12V Compatible with Most SUV,ATV,UTV,Motorcycle,Truck etc. #adDasen #ad
- Built-in led light emits soft light to light up the pattern when the switch is powered on. The surface cover is streamline curved design with laser-etched patterns onto it. Package included : 1x 5 pin Rocker Switch, 1x jumper wires set, 1x Diagram.
You can easily find the illuminated sign in a dark environment, no need to fumble for the switch in the dark anymore. Fitment:the switch fits into common square holder panel housing for most car, UTV, ATV, Jeep, SUV, motorcycle, truck, boat, 4X4, Wrangler and other off-road vehicles.
On-off rocker switch made of strengthened plastic and well-conductive pins. Simple to install, can easily turn on/off the lights. Application: standard 5 pin switch, fog lamps, headlights, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, rated at 20amp/12v and 10amp/24v, taillights and auxiliary lamps, etc.
3. omotor #ad
Omotor 2pcs 3ft LED Whip Lights with Remote Control and Rocker Switch Spring Base Spiral RGB Chase Light Offroad 360°Spiraling Rising Dream Wrapped Dancing Whips #adomotor #ad
- Ip67 waterproof, shockproof. Sliding the quick disconnect base "up" to release, connect the battery wire, then drill a hole to tighten the LED whip, finally you can control it by just controlling a remote controller. It features the enhanced shockproof mechanism and an updated base, which improving products durability and protecting the from mechanical damage.
Upgrade to last: use upgrade base with spring to add flexibility for more swings and buffer pressure for less break or snapping at the base. Safety & durability - these led lighted whips are covered by eva transparent heat shrink tube and high-toughness silicone which can bendable, and protect the LED chips from water and dust.
Box come with - 2pcs 3ft led whips with spring, American flag w/carabiner rings, quick connect/disconnect mounting Spring base, remote control, Rocker Switch, plug-n-play harness and control box, instruction manual.
Easy installation - installation is really quick and easy as the lighted whips come with Plug & play components which anyone can put it together quickly. Gives more confidence when you’re at the high speed, sandproof, hard corner and tough terrains. Overview - there is only a remote control method: remote control. Rf remote control offers 300 patterns, flashing, 32 brightness and 10 speed settings to chasing, 366 modes, even sequential lighting effects. Super durable.
4. MICTUNING #ad
Blue, MICTUNING MIC-LSR12 5Pin Rear Lights Rocker Switch On-Off LED Light 20A 12V #adMICTUNING #ad
- Perfect appearance: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark. Mictuning 5 pin on-off rocker switch is spst designedsingle pole single throw switch, simple to install, it come along with a set of jumper wires, can easily turn on/off the lights.
What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and Lifetime Friendly Customer Service.
Package included : 1x 5 pin Rocker Switch, 1x jumper wires set, 1x Diagram. Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability.
Wide application: standard 5 pin switch, fog lamps, led work lights, rated at 20amp/12v and 10amp/24v, Headlights, available for upgrading most wiring harness to control Led Light Bar, taillights and Auxiliary Lamps, etc.
|Warranty||2 Year warranty for Genuine MICTUNING brand lights, replacement of whole light or accessories upon proof of defective of item itself.|
5. Niking Auto #ad
DJI4X4 Rear Lights Rocker Switch Laser Light Toggle Switch On-Off Button 5 Pins Blue LED Light 20A 12V #adNiking Auto #ad
- Mounting easily – just located the switch and plug the pin 7 to negative terminal, pin8 to out terminal, PIN2 and PIN6 to POWER and PIN3 to APPLICATION therefore its easily turn on/off the lights.
Wide useage – you could receive 5 pins switch which rated at 12v/20amp and 24v/10amp that available to improve wiring harness to control LED Light Bar, LED Work Light, LED Fog Light, LED Headlights and etc.5
5 pins on-off rocker switch – build in two blue light is sustain lighting up when the car power on that is useful to find out the rocker switch. You could gain – 1 pc rocker switch and 12 Months Quality Guarantee. Clean control table – if you could not bear the mess control table, the switch and switch housing buy separately could become your first choice and bring factory look.
6. Nilight #ad
Nilight 90004B Bumper Light Bar Rocker Switch Led light Bar 5 Pin Laser On/Off Switch 20A/12V 10A/24V Switch jumper wires set,2 years Warranty #adNilight #ad
- Easy to install and use: 5 pin on-off rocker switch with SPST design single pole single Throw, simple installation, freely turn on or off the light.
Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. Wide application: available for controlling LED light bar, taillights, headlights, fog lamps, off road lights, driving lights, LED work lights, etc.
The package included: 1x 5 pin rocker switch, 1X jumper wires set, 1X diagrams. Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away.
|Warranty||2 Years Warranty|
7. Nilight #ad
Blue, Nilight NI-RS05 LED Light Bar Rocker Switch 5Pin Laser On/Off Rear Lights Rocker Switch 20A/12V 10A/24V Switch Jumper Wires Set,2 years Warranty #adNilight #ad
- Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. Fit type: Universal Fit.
The package included: 1x 5 pin rocker switch, 1X jumper wires set, 1X diagrams. Wide application: available for controlling LED light bar, driving lights, headlights, taillights, fog lamps, off road lights, LED work lights, etc.
Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. Easy to install and use: 5 pin on-off rocker switch with SPST design single pole single Throw, simple installation, freely turn on or off the light.
8. Xislet #ad
Xislet LED Light Bar Rocker Switches Compatible with ATV Polaris Ranger RZR 800-1000 XP Turbo Can Am Commander 800 Maverick X3 Rear Lights UTV Rocker Switch, LED Blue Backlit Combo Package Blue #adXislet #ad
- Standard rocker switch rated at 20amp/12v and 10amp/24v, safe to have output circuit-overload-reverse polarity-multiple protection. Xislet 5 pin on-off rocker switch with spst design is suitable for most 4x4, Kawasaki, UTV, Marine, ATV, SUV, Off-road, Boat, Motorsport, Polaris Ranger RZR, Jeep Wrangler dash panel switches.
Package included: rocker switch comes along with 1x diagram and 3 jumper wires, simple to install, can easily turn on/off the lights, fit like a glove.
Toggle switch built in 2 lED lamp beads, chip lighting backlit penetrating to surface cover that illuminates the patterns continuously. Rocker-switch made of strengthened plastic and maskant conductive pins, and the surface cover is designed to be streamline curved with etched patterns.
9. Nilight #ad
Nilight 6 Pack Rocker Switches with Night Glow Stickers 5 PIN SPST Rocker Switches with Green Backlit 12V/24V Toggle Switches for Cars Trucks RVs Boats Auto Motorcycles,2 Years Warranty #adNilight #ad
- Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience.
Idea replacements: the switches can be replaced to any defective 5 PIN SPST switches, convenient and cost-effective. Wide application: standard 5 pin switch, headlights, fog lamps, available for upgrading most wiring harness to control Led Light Bar, taillights and auxiliary Lamps, rated at 20amp/12VDC and 10amp/24VDC, Led Work Lights, etc.
Package include: 6pcs rocker switches, 6 sets of jumper wires, 2 Pieces of DIY stickers. Diy stickers: products also shipped with 1 pcs of diy sticker and 1 PCS of night glow sticker with various patterns, can be DIY used to control any vehicle electrical appliance for your specific needs.