1. Tyger Auto
#ad
Tyger Auto T3 Soft Tri-Fold Truck Bed Tonneau Cover for 2015-2020 Ford F-150 Styleside 5.5' Bed TG-BC3F1041
#adTyger Auto #ad - Cover is dual-coated and made out of heavy duty 24oz marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.Note: small holes will need to be cut in the bed liner for vehicles equipped with over-the-bedrail bed liner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bed liner without modification.
More information #ad
Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed. Easy no drilling installation with instruction and mounting hardware provided. Us design Patented. Limited lifetime ! | important: please measure your truck bed size before ordering. We accept returns; however customer will assume the return shipping cost if ordered wrong.Brand | Tyger Auto #ad |
Manufacturer | Tyger Auto #ad |
Height | 2.13 Inches |
Length | 70.52 Inches |
Weight | 29.01 Pounds |
Width | 23.91 Inches |
Part Number | TG-BC3F1041 |
Model | TG-BC3F1041 |
Warranty | Lifetime |
More information #ad
2. Tyger Auto
#ad
Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover for 2015-2020 Ford F-150 Styleside 5.5' Bed TG-BC1F9029
#adTyger Auto #ad - Easy no-drilling installation with the provided instruction and hardware. Built-in horizontal crossbars offer support when cover is lying flat and roll up with the cover providing full bed access. We accept returns, however customer will assume the return shipping cost if ordered wrong.Comes with dual coated 24oz marine grade vinyl top, heavy duty aluminum powder coated side rails and clamps. Seals with velcro strip on the sides and secures with latch lock system at the tailgate.
More information #ad
Small holes will need to be cut for vehicle equipped with Over-the-Bedrail bedliner to secure the clamps; Works with Under-the-Bedrail bedliner without modification. Tyger limited lifetime warranty! please measure your truck bed size before ordering. Also comes with adjustable tension system on the end of the side rails to keep the cover tight and wrinkle free. Apply front seal strip provided to the front bed rail to seal the gap. Cover appears a little short : make sure side rails are positioned properly, not too far from the tailgate, Move the whole cover assembly towards the tailgate, while making sure it's properly sealed at the front. Some species truck models have lower front bed rail.
Brand | Tyger Auto #ad |
Manufacturer | Tyger Auto #ad |
Height | 2.92 Inches |
Length | 73.39 Inches |
Weight | 25.04 Pounds |
Width | 7.53 Inches |
Part Number | TG-BC1F9029 |
Model | TG-BC1F9029 |
Warranty | Lifetime |
More information #ad
3. Gator Covers
#ad
2020 Ford F-150 5' 7" Bed 67.1"| Made in the USA, Gator ETX Soft Roll Up Truck Bed Tonneau Cover | 53315 | Fits 2015
#adGator Covers #ad - Cover assembly comes with everything you need for a simple install. Fits 2015 - 2020 ford f-150 5' 7" 67. 1". Limited lifetime warranty | the gator etx soft roll up is backed by a Lifetime Warranty on the frame and a 10-year warranty on the tarp.More information #ad
100% truck bed access | roll the cover towards the cab and secure with the storage strap for full access to your bed. Made in the usa | and supported by our USA-based customer service team! Easy & fast install | simply clamp the rails on without the use of a drill.Brand | Gator Covers #ad |
Manufacturer | IR4EC #ad |
Height | 5.75 Inches |
Length | 80 Inches |
Weight | 24.65 Pounds |
Width | 6.38 Inches |
Part Number | 53315 |
Model | 53315 |
More information #ad
4. BAK
#ad
BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448329 | Fits 2015-20 Ford F150 5'6" Bed
#adBAK #ad - Relatively light, yet offers heavy duty durability. This hard folding tonneau cover easily clamps on with no drilling and provides outstanding security against rain, theft, snow, dirt and sun. Built with aircraft grade aluminum sandwich panels. Fits 2015-2018 ford f-150 short Bed 5'6".More information #ad
Brand | BAK #ad |
Manufacturer | BAK #ad |
Height | 8.5 Inches |
Length | 69 Inches |
Weight | 71 Pounds |
Width | 23 Inches |
Part Number | 448329 |
Model | 448329 |
Warranty | Extended 5 Year Warranty |
More information #ad
5. X XCOVER
#ad
Xcover Low Profile Hard Folding Truck Bed Tonneau Cover, Compatible with 2015-2020 F150 Pickup 6.5 Ft Styleside Bed
#adX XCOVER #ad - Durable & easy installation: solid core hard panels can be rated up to 500lbs of evenly distributed weight. Please see the video on the left for installation, it is completely assembled for easy No-Drilling installation in minutes.Hard panel is scratch resistant and provides maximum theft protection. 5 years warranty: against defects in materials and workmanship under its intended use, any questions, Please be assured to use our tonneau cover, please contact our customer service.
More information #ad
Unique clamping system & theft protection: patent pending rail and latch design, Xcover latch allows for one-finger release to open and locks automatically when you close the cover. Well protect your cargos: xcover low profile hard tri-fold tonnneau cover is designed to perform in the most extreme conditions, windy or sunny, rainy, no matter snowy, premium UV resistant and cold resistant, your cargos on the bed will be well protected from moisture and dirt. Xcover is low profile and sit inside of truck bed, full stake pockets available to be used with the cover on. Fitment: fit 2015-2019 ford f150 pickup, 6. 5ft styleside bed.
Brand | X XCOVER #ad |
Manufacturer | Xcover #ad |
Part Number | 243063 |
More information #ad
6. Syneticusa
#ad
Syneticusa Aluminum Retractable Low Profile Waterproof Tonneau Cover for 2004-2020 F-150 F150 5.5' 5'6" Short Truck Bed
#adSyneticusa #ad - Low-profile patented design; Incredibly strong and easy to use. Need to drill holes for drainage tubes. Constructed of strong, salt, aluminum slats and powder coated in a matte, snow, textured black finish to protects your truck bed from rain, leaves and more.More information #ad
Uv protected; no Fading, No Maintenance. Lockable in any position; Secures your valuable cargo or stays open whenever and wherever you need it. Hardware, such as mounting bracket and Bolts are included, and total installation is around 30 minutes.Brand | Syneticusa #ad |
Manufacturer | Syneticusa #ad |
Part Number | TCR-F15004-5.5 |
Warranty | Limited Lifetime Warranty |
More information #ad
7. Gator Covers
#ad
2014 Ford F-150 5' 5" Bed | Made in the USA, Gator ETX Soft Tri-Fold Truck Bed Tonneau Cover | 59301 | Fits 2009
#adGator Covers #ad - The gator sfx includes a universal tailgate seal. Fits ford f-150 2009-14 5' 5" bed. Drive with the cover in the 2/3 open position when you need bed access for hauling large loads. Each cover is custom fit to your truck’s year, make and model providing a tight fit and integrated look and feel.Easy & fast no-tool install | the gator etx tri-fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection.
More information #ad
Once installed, the seal prevents dust and road debris from entering your bed through the tailgate gap. Eliminate the elements | this cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition. Simple operation | to open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Sleek & durable design | the gator etx mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of your truck.
Brand | Gator Covers #ad |
Manufacturer | Extang Corporation #ad |
Height | 6 Inches |
Length | 68 Inches |
Width | 20 Inches |
Part Number | 59301 |
Model | 59301 |
More information #ad
8. DNA MOTORING
#ad
DNA MOTORING TTC-HARD-015 Truck Bed Top Hard Solid Tri-Fold Tonneau Cover,Black
#adDNA MOTORING #ad - Rubberized edges to seal; easy to install With included clamps. Adjustable tension for the perfect fit. Black powdercoated aluminum plating. Increases trucks aerodynamics at speed. Locking strap to secure cover while folded up and driving.More information #ad
Brand | DNA MOTORING #ad |
Manufacturer | DNA MOTORING #ad |
Part Number | TTC-HARD-015 |
Model | TTC-HARD-015 |
Warranty | Contact the seller directly for warranty information for this product |
More information #ad
9. oEdRo
#ad
Styleside, oEdRo Quad Fold Tonneau Cover Soft Four Fold Truck Bed Covers Compatible with 2015-2020 Ford F-150 F150, 6.5 Feet Bed
#adoEdRo #ad - By following the instruction manual that is included, you will have a smooth and simple installation. Quad fold design this tonneau cover is compatible with 2015-2020 Ford F-150 F150 | Styleside 6. 5 feet bed. While we do accept returns, the buyer may be responsible for the return shipping fee if ordered wrong.More sturdy oedro’s quad-fold bed cover has four built-in horizontal crossbars offering support when fully unfolded the cover and saving more space when folded up.
More information #ad
Easy installation no extra tools are required. Please contact us directly should any inquiries arise. In the majority of cases no drilling small holes need to be cut for trucks with rail cap or over-the-bedrail bed liner to secure the clamps; No cut needed for pick up with under-the-bedrail bed liner. Warrantylimited lifetime warranty! please measure your truck bed size or contact us before buying. Heavy duty material composed of double layer pvc, oedro’s tonneau cover has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability.
Brand | oEdRo #ad |
Manufacturer | oEdRo #ad |
Height | 5.51 Inches |
Length | 70.87 Inches |
Weight | 33.07 Pounds |
Width | 22.44 Inches |
Part Number | ORER0301W015 |
Warranty | Limited lifetime warranty |
More information #ad