Top 9 02 Sensor Socket Kit – Socket & Socket Wrench Sets

As an Amazon Associate I earn from qualifying purchases.

1. GEARWRENCH

#ad

GEARWRENCH 8 Pc. Sensor and Sending Socket Set, 41720

#ad
GEARWRENCH #ad - Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches. Includes 1/2" drive 1-13/16" socket for Oil Sending Unit. Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units. Includes 3/8" drive 7/8" 22mm low Profile Offset socket for O2 Sensor Unit. Includes 3/8" drive 7/8" 22mm socket for Oxygen Sensor Units. Includes 3/8" drive 1-1/16" Deep socket for Oil Pressure Sending units. Includes 1/2" drive 1-1/16" socket for Thermal Sensor units. Durable blow mold case for safe storage and tool retention.
BrandGEARWRENCH #ad
ManufacturerApex Tool Group #ad
Height2 Inches
Length11.7 Inches
Weight2.58 Pounds
Width7.8 Inches
Part Number41720
Model41720
WarrantyStandard Limited Lifetime

2. ABN

#ad

29mm – All Vehicle O2 Removal and Installation, 27mm, ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm 7/8in

#ad
ABN #ad - Contents: package includes 1 29mm pressure/vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 12pt socket + 1 27mm oil pressure sending unit socket + 1 1-1/16 and 1 inch oil pressure sending unit socket + 1 7/8 inch long oxygen sensor socket wrench + 1 7/8 inch short oxygen sensor socket wrench + 1 carrying case.

No more hassle: the abn oxygen 02 sensor socket 7-piece tool kit – 22mm 7/8” inches, oil pressure sending units, removal, 29mm – All Vehicle O2 Removal and Installation is for inspection, and installation of hard-to-reach oxygen sensors, oil pressure switches, vacuum switches, 27mm, thermal sensor switches, and brake light switches; Each socket is permanently etched with size marking for your convenience. Built to last: constructed from chrome-vanadium steel CR-V for extra strength and longevity; Tools have a light coating of oil to protect them from rusting.

Easy storage: heavy-duty 9” x 2. 25” x 8” inch 22. 9cm x 5. 7cm x 203cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Matches your car: universal fit for audi, citroen, vauxhall/open gm, mercedes, bmw, skoda, and volkswagen; Sizes include 22mm 7/8”, 27mm, peugeot, renault, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
BrandABN #ad
ManufacturerABN #ad
Height7.5 Inches
Length9.25 Inches
Weight2.09 Pounds
Width2.5 Inches
Part Number3884

3. ABN

#ad

1pk O2 Sensor Socket, 02 Sensor Removal Tool Remover Kit, Oxygen Sensor Socket Tool, ABN Oxygen Sensor Wrench

#ad
ABN #ad - Built to last: no need to worry about this sensor oxygen tool bending and breaking when you need it most; O2 tool oxygen sensor remover is constructed of cold-forged steel for added strength and longevity. Get the job done: no additional tools needed; We recommend adding penetrating oil on oxygen sensor to be removed and anti-seize on threads of new oxygen sensor to be installed optional, not included.

Remove oxygen sensors with ease: when you need to adjust an oxygen sensor that is in a tight spot, use the ABN Oxygen Sensor Wrench Tool; O2 sensor wrench package includes 1 O2 sensor socket wrench with 6pt socket and 12pt socket on 1 head recommended for downstream. Ergonomic grip: oxygen sensor socket tool o2 socket wrench features a curved handle to allow better leverage and clearance to get around exhaust pipes; Flip around O2 sensor tool removal handle to let curved handle fit in most spaces.

Access difficult spots: reaching o2 sensors can be difficult; Slim design with flex head of oxygen sensor socket wrench tool offers extra clearance for removal and installation of oxygen sensors positioned upward and inward of floorboard.
BrandABN #ad
ManufacturerABN #ad
Height3 Inches
Length12 Inches
Width3 Inches
Part Number815622

4. Carock

#ad

Carock 7PCS O2 Oxygen Sensor Socket Set Tool Kit 22mm7/8" 27mm 29mm for All Vehicle O2 Removal Installation Universal Puller and Removal Tool

#ad
Carock #ad - All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification. Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires. The perfect tool kit for the professional mechanic or DIY enthusiast. Ideal for the removal and installation of oxygen sensors, oil pressure switches, oil pressure sending units, vacuum switches equipped and thermal sensor switches. Heavy duty forged sockets constructed from Chrome Vanadium alloy steel with black finish for lasting lifetime.
BrandCarock #ad
ManufacturerCAROCK #ad
Part Number02CR-TL01007
Model8542036595

5. OEMTOOLS

#ad

Oxygen Sensor Removal Kit, O2 Sensor Socket 22mm 7/8, 3/8 Drive and 1/2 Drive, 3 Piece Socket Set with Case, OEMTOOLS 27110 Oxygen Sensor Socket Set

#ad
OEMTOOLS #ad - Full specifications: set includes 3/8" drive 7/8" 22 mm deep socket, 3/8" drive 7/8" 22 mm Crowfoot Socket, 1/2" drive 7/8" 22 mm Deep Crowfoot Socket, and a storage case; Sockets have chrome plating and a black oxide finish. Replace any o2 sensor with ease: all three sockets in this oxygen sensor socket set feature a cutout design to keep the sensor wire intact; An offset socket in two drive sizes, 3/8 and 1/2, allows for easy access at difficult angles.

An open-and-shut case: the included sturdy case enables easy portability; The tough red exterior and easy to read label help you protect, store, and find this O2 socket set in a garage full of automotive tools. A good fit for most cars: these 7/8" 22 mm o2 sockets are the right size for most domestic and many imported vehicles; Chances are these oxygen sensor removers will fit not just your car, friends, but those of your neighbors, and family.

Strong sockets for tough sensors: covered in chrome plating and a black oxide finish, these OEMTOOLS sockets remove hard to budge sensors with or without the help of penetrating oil or heating techniques; They also service hex vacuum switches.
BrandOEMTOOLS #ad
ManufacturerOEM #ad
Height1.7 Inches
Length9 Inches
Weight1.55 Pounds
Width3.8 Inches
Part Number27110
Model27110
WarrantyOEMTOOLS Limited Lifetime

6. ABN

#ad

ABN Oxygen Sensor Kit, 10pc Chrome Molybdenum Oxygen Sensor Socket Repair Set for Repairing Damaged Lambda Threads

#ad
ABN #ad - Skip the mechanics: repair lambda threads at home using the ABN Oxygen Sensor Socket Set; Use the 10pc thread repair kit for automotive maintenance to save time and money that you would have spent at the mechanics. Package contents: thread restorer set includes 3 taps, 1 insert tool, 5 nuts and spares, 1 reamer, and 1 plastic storage case.

Use repeatedly: sensor socket set is constructed of chrome molybdenum to withstand repeated use; High-performing oxygen sensor tool set outer coating prevents corrosion for longevity. Keep your vehicle running longer: repairing your lambda sensor is important because it ensures that your fuel mixture has the right amount of oxygen for efficient combustion; Rely on the O2 sensor socket set to ensure that you are putting out proper emission levels into the environment.

Bring tools anywhere: steel coated thread restorer kit case keeps pieces neatly organized; Lightweight 2lb 32oz case is easy to transport between job sites and takes up little room making it easy to store; Case is equipped with a slider opener for easy access.
BrandABN #ad
ManufacturerABN #ad
Height1.5 Inches
Length8 Inches
Width6 Inches
Part Number808969

7. SCITOO

#ad

SCITOO 7pcs Sensor Socket Oil Pressure Sending Unit Master Sensor Socket Tool Kit Fit for Most Modern Vehicles

#ad
SCITOO #ad - 1pc 3/8'' drive x 1-1/16'' & 1'' 6 point oil pressure sending unit socket. 1 year warranty we provide 1 year warranty, return and refund service. Plug and play universal 6-point 7/8” 22mm socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.

Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer. We will randomly send out blue or red plastic cases, support replace, except for the color, they are exactly the same.11pc 3/8'' drive x 7/8'' vacuum switch socket with slot. 1pc 1/2'' drive x 7/8'' long sensor wrench socket with slot. 1pc 3/8'' drive x7/8'' 6 point vacuum switch socket with slot. 1pc 1/2'' drive x 29mm pressure/vacuum switch socket with slot.

Finished with Black Oxide to avoid rust. Make sure the car information before purchasing it, feel free to Contact us if you have any question. Function designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Side cutout design allows easy access to from section and avoids from damage to wire. What you get 1pc 1/2'' drive x 27mm oil pressure sending unit socket.
BrandSCITOO #ad
ManufacturerSCITOO #ad
Height2.36 Inches
Length8.86 Inches
Weight4.63 Pounds
Width7.48 Inches
Part Number105430
Model105430-5206-1443064341

8. WINMAX TOOLS AUTOMOTIVE

#ad

WINMAX TOOLS AUTOMOTIVE 5PC 1/2" 22mm Oxygen Sensor Socket Removal Thread Chasers Set Spark Plug

#ad
WINMAX TOOLS AUTOMOTIVE #ad - The arrival time is about 7-12 business days to United States usually. 3/8"dr x7/8"22mm x6pt x 80mm LONG. Suitable for oxygen sensors found on most modern vehicles. 1/2"dr x7/8"22mm x50mm long 3/8"dr x7/8"22mm x 30mm long. Thread chasers:m12x1, 25, M18 X 1. 5mm. The items you ordered will be shipped out in 1-2 business day via e-packet by China Post when your payment is clear.
BrandWINMAX TOOLS AUTOMOTIVE #ad
ManufacturerWinmax #ad
Part NumberWinmax
Model4350275482

9. A ABIGAIL

#ad

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

#ad
A ABIGAIL #ad - Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time! Package1-pc 3/8” dr.

Offset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” Dr. Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Our aim is to make you satisfy the parts and the service we provide for you. Extra deep broach socket 3-1/8” long, 1-pc 1/2” dr.

Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Service100% satisfaction guarantee, simply contact customer service for troubleshooting help, parts, replacement, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, or refund.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7841F