Top 7 Set of 4 Shocks – Automotive Replacement Complete Shock Assemblies

As an Amazon Associate I earn from qualifying purchases.

1. DRIVE TECH AMERICA

#ad

DTA 70090X Full Set 2 Front Complete Strut Assemblies With Springs and Mounts + 2 Rear Shocks 4-pc Set Compatible with 1995-2004 Tacoma 4WD Only or 1998-2004 Tacoma Prerunner

#ad
DRIVE TECH AMERICA #ad - Fully loaded complete unit is safe and easy to install. Spring seats insulated to springs to ensure quiet and comfortable ride quality. Guranteed fit and function. The strut is nitrogen gas charged with 4 Lip Teflon banded Piston Seal, micro polished chrome plated piston rod and all weather SV3 fluid. Neoprene boots and bump stops when applicable. Coil spring is heated treated & powder coated to ensure longevity and protection from Corrosion.
BrandDRIVE TECH AMERICA #ad
ManufacturerDRIVE TECH AMERICA #ad
Height10 Inches
Length24 Inches
Weight44 Pounds
Width14 Inches
Part Number70090X
WarrantyDTA warrants that the products are free from defects in material and workmanship for the lifetime of the ownership of the vehicle. DTA warranty covers part only, does not cover any labor cost or any other cost incurred due to the failure of the part. DTA product liability is strictly limited to the replacement of the unit once DTA has determined it to be defective. DTA warranty is voided if the product is installed in a vehicle that has been modified. DTA warranty is voided if the part has been altered, damaged, misused or improperly installed.

2. ECCPP

#ad

Set of 4 Shocks,ECCPP Shocks Absorbers fits 2005-2014 for Ford F-250 Super Duty,2005-2007 2013-2014 for Ford F-350 Super Duty Front Rear Auto Shocks with 554347 345070

#ad
ECCPP #ad - Notice for buying eccpp's car shokcs: please check your vehicle year make model with our description to avoid buying a wrong type for your vehicle. Package including shock absorbers only, no springs or mounts or rubbers.

Diy design for installation easily: step1-raise and secure the car and Wheel Removal; Step 2-Remove the nuts and bolts that secure the shock absorber at both ends; Step-3 Disengage the shock from the mounting surfaces; Step-4 Installing the New Shocks and Struts. Eliminate your concerns about eccpp's amortiguadores: high quality japanese made oil seals, multi-lip oil seal design to isolate external grime to AVOID OIL LEAKAGE AND & ELIMINATE RATTLES, to reduce friction between the piston rod and seal, with a Teflon coated piston band for a positive seal and longer life.

Safety for front rear shocks: to ensure that the shock absorber is not damaged, the shock absorber will be packaged and transported as TWO packages sometimes. Oem shocks sets fits: 2005-2014 for ford f-250 super duty, 2005-2007 2013-2014 for ford F-350 Super Duty Compatible with OE# 554347 345070 .
BrandECCPP #ad
ManufacturerECCPP #ad
Height3.15 Inches
Length39.3 Inches
Width3.15 Inches
Part Number994587-5211-1705423219
Model994587-5211-1705423219

3. Bilstein

#ad

Bilstein 5100 Monotube Gas Shock Set compatible with 1987-1996 Jeep Wrangler w/3-4" Lift

#ad
Bilstein #ad - Factory shock mounting bolts are reused for installation. Monotube gas charged for longevity, durability, and performance. Bilstein's limited Lifetime manufacturer's Warranty protects against defects and premature failure. Set of 4 shocks - compatible with Vehicles w/3-4" Lift. All necessary washers, bushings, and nuts included. Shock boots included with all shocks except in cases of special fitment.
BrandBilstein #ad
ManufacturerBilstein #ad
Height30 Inches
Length10 Inches
Weight25 Pounds
Width10 Inches
Part NumberSIA19010032

4. Bilstein Shocks

#ad

Bilstein 5100 Monotube Gas Shock Set Compatible with 2005-2016 Ford F250 / F350 4WD Pickups

#ad
Bilstein Shocks #ad - All necessary washers, bushings, and nuts included. Set of 4 shocks - compatible with 4WD Vehicles w/2" front Lift, 0-1" rear lift. Shock boots included with all shocks except in cases of special fitment. Bilstein's limited Lifetime manufacturer's Warranty protects against defects and premature failure. Monotube gas charged for longevity, durability, and performance. Factory shock mounting bolts are reused for installation.
BrandBilstein Shocks #ad
ManufacturerBilsteinShocks #ad
Height30 Inches
Length10 Inches
Width10 Inches
Part NumberSIA19015408
ModelShock Boot

5. Skyjacker

#ad

Skyjacker H7000 Hydro Shocks Set Compatible wtih 1988-1998 Chevrolet K1500 4WD w/4-6" Lift

#ad
Skyjacker #ad - All necessary washers, bushings, and nuts included. Part numbers h7085 and h7086. Set of 4 shocks for vehicles w/4-6" front lift and w/3-5. 5" rear Lift. Fits 4WD vehicles. Representative Image Actual Product May Vary. Brand new In Box. Factory shock mounting bolts are reused for installation. Skyjacker's limited lifetime warranty protects against defects and premature failure.
BrandSkyjacker #ad
ManufacturerSkyjacker #ad
Height10 Inches
Length28 Inches
Weight25 Pounds
Width10 Inches
Part NumberSIA190147997

6. Detroit Axle

#ad

Detroit Axle, 2pc Set, Rear Shock Absorbers Replacement for Ford F-150 Lincoln Mark LT

#ad
Detroit Axle #ad - 10-year Warranty. Kit includes: 2x Rear Shock Absorbers. Undergo impact, wear, and fatigue testing to help ensure quality and durability. Detroit axle suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs. Replacement for 2004 ford f-150 new body style; 4wd - 2005 - 2008 ford f-150 4wd - 2009 - 2013 ford f-150 RWD - 2006 - 2008 Lincoln Mark LT 4WD.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height8 Inches
Length35 Inches
Weight12 Pounds
Width9 Inches
Part Number911262 x2

7. MOSTPLUS

#ad

MOSTPLUS Front & Rear Complete Strut & Spring Assemblies Shock Absorbers Compatible for 93-02 TOYOTA COROLLA Set of 4

#ad
MOSTPLUS #ad - Replace complete strut assembly number 271951, 181954, 171954;502719519, 271952, 9213-0011, 171953, 171953, 5719531, 11152. Fitment compatible for 1998-2002 chevrolet Prizm, Compatible for 1994-2002 Toyota Corolla.

Easy installation-- complete rear left & Right Side Strut Assembly. Features-- high silicon to resist metal fatigue; Electrophoretic-coated increase performance of anti-corrosion and anti-oxidation. Just remove and replace the complete strut assembly in one piece; Direct replacement. High performance-- chrome piston rod with oem brackets and Mountings prevent leaking issue; Seamless sleeves to avoid gliding; The steel coil spring guaranteed safe and comfortable ride; Low vibration with No squeaking noise and longer durability.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part NumberM141005678