Top 10 Supreme Suspensions Lift Kit – Automobile Chassis Body & Suspension Lift Kits

As an Amazon Associate I earn from qualifying purchases.

1. Supreme Suspensions

#ad

Supreme Suspensions, Full Lift Kit for 2007-2020 Avalanche Suburban Tahoe Yukon 1500 3.5" Front Lift Strut Spacers + 3" Rear Lift Spring Spacers

#ad
Supreme Suspensions #ad - An alignment is always recommended if you are altering the height of your vehicle. Contents: 2x t6 billet aluminum front top mount strut spacers, 2x High-Density Delrin Front Bottom Mount Strut Spacers, Installation Hardware, installation Instructions, 2x High-Density Delrin Rear Spring Spacers, Supreme Suspensions Pro Pack.

Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools. Not compatible with vehicles equipped with Auto-Ride / Air-Bag / Self-Leveling Suspension Systems. Compatible with 2007 - 2020 chevy suburban 1500 2wd 4wd, 2007 - 2020 chevy tahoe 2wd 4wd, 2007 - 2020 gmc yukon 1500 2wd 4wd and 2007 - 2013 chevy avalanche 1500 2WD 4WD. Important note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2.

5", or more. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Technical notes: 3. 5" front and 3" rear suspension lift. Will only fit 6-lug models. The upper ball joint will wear out rapidly with use of stock UCA.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 40(blk)_306.4

2. Supreme Suspensions

#ad

Supreme Suspensions, Full Lift Kit for Toyota 4Runner and FJ Cruiser 4WD 3" Front Lift Strut Spacers + 2" Rear Lift Spring Spacers + Differential Drop Kit Black

#ad
Supreme Suspensions #ad - Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Does not fit 4runner 2018+ trd pro model or any Limited models with X-REAS hydraulic struts. Important: *please note that spacer thickness to lift height is NOT a 1:1 ratio.

It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. The included differential drop kit will lower your front differential and reduce the excess wear on CV joints and axles caused from lifting the front of your truck. Technical notes: 3 inch front and 2 inch rear suspension lift. An alignment is always recommended after altering the height of your vehicle.

Compatible with 2003 - 2022 toyota 4runner 4wd and 2007 - 2015 toyota fj cruiser 4wd. Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools. Contents: 2x t6 aircraft billet aluminum front strut spacers, 2x High Density Polyurethane Spring Spacers, Installation Instructions, 1x Differential Drop Kit, Installation Hardware, and Supreme Suspensions Pro Pack.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 327_3F+2R_328_PRO

3. Supreme Suspensions

#ad

Full Lift Kit for 2003-2017 Ford Expedition 3.5" Front Lift Billet Aluminum Strut Spacers + 2.5" Rear Lift High-Strength Steel Spacers 2WD 4WD, Supreme Suspensions

#ad
Supreme Suspensions #ad - Technical notes: 3. 5 inch front and 2. 5 inch rear suspension lift. Will not work on platinum trim, models equipped with CCD independent or Auto-Ride / Air-Bag Suspension. Compatible with 2003 - 2017 ford expedition 2wd 4wd.

Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Please research for your specific application. Rear suspension on the Expedition works in an arc design. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. Installation: after an easy 2-4 hour installation process, you're ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle.

Please note that spacer thickness to lift height is NOT a 1:1 ratio. Contents: 2x t6 aircraft billet aluminum front strut spacers, Installation Hardware, 2x High-Strength Steel Rear Strut Spacers, Installation Instructions and Supreme Suspensions Pro Pack. Note: wheel / tire size combinations after lift may vary.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 191.3(473)(pro)

4. Supreme Suspensions

#ad

Full Lift Kit for 2005-2022 Toyota Tacoma 4WD 3" Front Lift Strut Spacers + 2" Rear Lift Tapered Blocks + Square Bend U-Bolts + Diff Drop Kit Black, Supreme Suspensions

#ad
Supreme Suspensions #ad - Our new us patent pending 3-bend single weld Rear Lift Blocks are designed with Build-In Taper to help correct pinion angle and maintain stock ride quality. Technical notes: 3 inch front + 2 inch rear suspension lift. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.

This kit includes 4x u-bolts: 9/16" Threads, 10" Long x 2. 5" wide. Contents: 2x t6 billet aluminum strut spacers, 4x square bend u-Bolts, installation hardware, 2x High-Strength Steel Tapered Lift Blocks, Installation Instructions, 1x Differential Drop Kit, and Supreme Suspensions Pro Pack. Please note that front strut spacer thickness to lift height is not a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.

Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle. Front spacers are noT compatible with TRD Off-Road Model. Will not fit 5-Lug Models. Compatible with 2005 - 2022 toyota tacoma 4wd only.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Weight18 Pounds
Part NumberAZM 292(STB2)(blk)(328)(pro)

5. Supreme Suspensions

#ad

Full Lift Kit for Toyota 4Runner 3" Front Lift Aircraft Billet Strut Spacers + 2" Rear Lift High Density Polyurethane Spring Spacers 2WD 4WD Blue, Supreme Suspensions

#ad
Supreme Suspensions #ad - Compatible with 2003 - 2022 toyota 4runner 2wd 4wd and 2007 - 2015 toyota fj cruiser 2wd 4wd. Contents: 2x t6 aircraft billet aluminum front strut Spacers, Installation Instructions, Installation Hardware, 2x High Density Polyurethane Spring Spacers, and Supreme Suspensions Pro Pack.

Technical notes: 3 inch front and 2 inch rear suspension lift. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools.

Does not fit 4runner 2018+ trd pro model or any Limited models with X-REAS hydraulic struts. Important: *please note that spacer thickness to lift height is NOT a 1:1 ratio. An alignment is always recommended after altering the height of your vehicle. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 327(blue)(pro)

6. Supreme Suspensions

#ad

Full Lift Kit for 2007-2019 Silverado Sierra 1500 3.5" Front Strut Spacers + 3" Rear Lift Blocks + Square Bend U-Bolts + Shock Mount Extenders, Supreme Suspensions

#ad
Supreme Suspensions #ad - 2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks. Technical notes: 3. 5 inch front and 3 inch rear suspension lift. Installation: easy 2-4 hour installation process*.

Note for z71 / ltz owners: *some ltz/z71 models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. Compatible with 2007 - 2019 chevrolet silverado 1500 & 2007 - 2019 gmc sierra 1500 6-lug - 2wd 4wd. Contents: 2x t6 billet aluminum top strut spacers, 2x rear shock mount extenders, installation hardware, 2x High-Strength Steel Tapered Lift Blocks - 9/16 Pin, 4x Square Bend U-Bolts, 2x high-density delrin bottom Strut Spacers, Installation Instructions, Supreme Suspensions Pro Pack.

No special tools required! *an alignment is always recommended if you are altering the height of your vehicle. These spacers are not compatible with models equipped with Adaptive Ride Control / Auto-Ride / Air-Bag / MagneRide / Air-Ride, or any other Self-Leveling Suspension System. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Please note that front spacer thickness to lift height is not a 1:1 ratio.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Weight27 Pounds
Part NumberAZM 440(3R)(blk)(57)

7. Supreme Suspensions

#ad

Supreme Suspensions, Full Lift Kit for 2000-2006 Chevrolet and GMC 1500 SUVs Adjustable 1-3" Front Lift Torsion Keys + 2" Rear Lift Spring Spacers + Shock Extenders 6-Lug 4WD Silver

#ad
Supreme Suspensions #ad - A torsion bar puller can be rented at most chain auto stores, or 5 ton gear puller is required for install. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.

Installation: easy installation takes 2 - 4 hours. An alignment is always recommended after altering the height of your vehicle. Only fits models with 6-lug axle configurations. Fitment: 2002 - 2006 chevy avalanche 1500 4wd 2000 - 2006 chevy suburban 1500 4wd 2000 - 2006 GMC Yukon 1500 4WD. Contents: 2x high-strength steel max-torsion keys, 2x t6 billet aluminum Rear Spring Spacers, 2x High-Strength Steel Front Shock Extenders, Hardware, Installation Instructions and Supreme Suspensions Pro Pack. Technical notes: 1 - 3 inch front and 2" rear suspension lift.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Weight18 Pounds
Part NumberAZM 102(3f+2alR) pro

8. Supreme Suspensions

#ad

Supreme Suspensions, Full Lift Kit for 2009-2020 Dodge Ram 1500 4WD 3.5" Front Lift Billet Strut Spacers + 2" Rear Lift Billet Spring Spacers Silver

#ad
Supreme Suspensions #ad - Technical notes: 3. 5 inch front and 2 inch rear suspension lift. Does not fit mega cab, trx, Rebel or Warlock Models. Compatible with 2009 - 2020 dodge ram 1500 4wd only. Contents: 2x front t6 billet aluminum strut spacers, 2x Rear T6 Billet Aluminum Spring Spacers, Installation Hardware, installation Instructions, and Supreme Suspensions Pro Pack.

Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.

Not compatible with trucks equipped with the Active-Level Four-Corner Air Suspension. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Please note that front spacer thickness to lift height is NOT a 1:1 ratio. Please note: we recommend using a Coil Spring Compressor for easy removal and reinstallation of your springs.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Weight10 Pounds
Part Number488(3.5F+2alR) pro
Model488(3.5F+2alR) pro

9. Supreme Suspensions

#ad

Front Leveling Kit for 1994-2018 Dodge Ram 1500 2" Front Lift Spring Spacers 2WD Black, Supreme Suspensions

#ad
Supreme Suspensions #ad - Installation: after an easy 1 - 2 hour installation process*, you're ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle. Compressing your springs can be VERY dangerous.

Compatible with 1994 - 2018 dodge ram 1500 2wd and 2019 classic models only. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. Please note that spacer thickness to lift height is NOT a 1:1 ratio; spring spacers use compound ratios to provide lift amount. Not compatible with 2013+ ram 1500 models equipped with Active-Level Four-Corner Air Suspension. Does not fit extended cab, mega Cab, REBEL or TRX Models.

Using a spring compressor Tool is a critical step in preventing the spring from causing injury or damage to your vehicle. Contents: 2x aircraft billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack. Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Technical notes: 2 inch front suspension leveling lift.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 396.1_BLK_Ram

10. Supreme Suspensions

#ad

Full Lift Kit for 2007-2022 Toyota Tundra 2WD 4WD 3" Front Lift Strut Spacers + 2" Rear Lift Tapered Blocks + Square Bend U-Bolts Black, Supreme Suspensions

#ad
Supreme Suspensions #ad - Please note that front spacer thickness to lift height is not a 1:1 ratio. Does not fit rock warrior Models and TRD Suspension Package. Contents: 2x t6 billet aluminum strut spacers, installation Hardware, 2x high-strength Steel Tapered Lift Blocks, 4x Square Bend U-Bolts, Installation Instructions, Supreme Suspensions Pro Pack.

Benefits: improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Compatible with 2007 - 2022 toyota tundra 2wd 4wd. Installation: easy bolt-on installation takes 2 to 4 hours without the need for special tools.

Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Technical notes: 3 inch front + 2 inch rear suspension lift | u-bolts: 9/16" threads, 10" long x 2. 5" wide. An alignment is always recommended if you are altering the height of your vehicle.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part Number296(2R) pro