Top 10 Skunk2 Intake Manifold - Automotive Replacement Engine Intake Manifolds

Top 10 Skunk2 Intake Manifold - Automotive Replacement Engine Intake Manifolds
As an Amazon Associate I earn from qualifying purchases.

1. Skunk2 Racing

#ad

Skunk2 307-05-0270 Pro-Series Intake Manifold

#ad
Skunk2 Racing #ad - Ideal for turbocharged and naturally aspirated applications Eliminated secondary butterflies for improved airflow and horsepower 64mm throttle body opening can be port-matched up to 75mm.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height15 Inches
Length20 Inches
Width9 Inches
Part Number307-05-0270
Model307-05-0270

2. Skunk2 Racing

#ad

Skunk2 343-05-0200 Cold Air Intake System for Honda Civic

#ad
Skunk2 Racing #ad - Each kit includes a 3. 5-inch internal diameter lower tube and a tapered, 3. 5-inch to 3. 0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector.

Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained. Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitor's designs that locate the air filter from the side. Doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height20 Inches
Length9 Inches
Weight10 Pounds
Width15 Inches
Part Number343-05-0200
Model343-05-0200
WarrantySkunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.Skunk2 Racing shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor. Skunk2 Racing shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above.

3. Skunk2 Racing

#ad

Skunk2 307-05-9200 Ultra D-Series Silver Race Intake Manifold 3.5 Liters

#ad
Skunk2 Racing #ad - 6. 70" tilted & tapered Hi-Velocity Runners. Standard 3. 5l. 4 x 1/8" npt, 3 x 1/4" npt and 1 x oem AIT Port. Generously Cast Runner Walls for Porting. Includes thermal Manifold Flange Gasket.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight16 Pounds
Width0 Inches
Part Number307-05-9200
Model307-05-9200
WarrantySkunk2 warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 to be defective prior to any warranty credit or replacement is issued.Skunk2's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

4. Skunk2 Racing

#ad

Skunk2 307-05-0260 Pro-Series Intake Manifold

#ad
Skunk2 Racing #ad - Not compatible with oem d-series throttle body Must use larger-bore Skunk2 throttle body or similar. Not directly compatible with Civic Wagon or Wagovan; clearance modifications required. Not directly compatible with '96-'00 Civic; brake proportioning valve and fuel filter clearance required.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight5 Pounds
Width0 Inches
Part Number307-05-0260
Model307-05-0260

5. Skunk2 Racing

#ad

Skunk2 307-05-0280 Pro-Series Intake Manifold

#ad
Skunk2 Racing #ad - 64mm throttle body opening can be port-matched up to 75mm. Not compatible with '90-'95 throttle bodies featuring fast idle valve; must use Skunk2 throttle body or similar. Not compatible with '90-'93 engines featuring EGR valve; must use reprogrammed or later model ECU.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height15 Inches
Length20 Inches
Width9 Inches
Part Number307-05-0280
Model307-05-0280

6. Skunk2 Racing

#ad

Skunk2 307-05-0290 Pro-Series Intake Manifold Silver

#ad
Skunk2 Racing #ad - Ideal for turbocharged and naturally aspirated applications 64mm throttle body opening can be port-matched up to 75mm.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight10 Pounds
Width0 Inches
Part Number307-05-0290
Model307-05-0290

7. Skunk2 Racing

#ad

Skunk2 307-05-0505 Ultra B-Series Black Street Intake Manifold

#ad
Skunk2 Racing #ad - Country of Origin : China. Package dimensions: 49. 8 h x 22. 9 l x 38. 0 w centimetres. Will not work with factory throttle body, A minimum of 68 mm throttle body is required. Package weight: 6. 532 kilograms.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight13 Pounds
Width0 Inches
Part Number307-05-0505
Model307-05-0505
WarrantySkunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

8. Skunk2 Racing

#ad

Skunk2 372-05-0270 Thermal Intake Manifold Gasket for Honda Acura B18C1 Engines

#ad
Skunk2 Racing #ad - Direct replacements for OEM intake manifold gaskets. Reduces heat transfer into the intake manifold. High Heat deflection. Protects against heat soak and reduces the incoming air temperature before it reaches the cylinder head.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part Number372-05-0270
Model372-05-0270
WarrantySkunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Skunk2 Racing shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor. Skunk2 Racing shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above.

9. Skunk2 Racing

#ad

Skunk2 307-05-0300 Pro-Series Intake Manifold

#ad
Skunk2 Racing #ad - Not directly compatible when used in Civic or Integra chassis; clearance modifications are required. Ideal for turbocharged and naturally aspirated applications. Eliminated secondary butterflies for improved airflow and horsepower.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight12.6 Pounds
Width0 Inches
Part Number307-05-0300
Model307-05-0300

10. Skunk2 Racing

#ad

Skunk2 307-05-0325 Pro-Series Intake Manifold,Black

#ad
Skunk2 Racing #ad - Ideal for turbocharged and naturally aspirated applications 72mm throttle body opening can be port-matched up to 76mm Only compatible with '06-'11 Civic Si K-series engine.
BrandSkunk2 Racing #ad
ManufacturerSkunk2 #ad
Height0 Inches
Length0 Inches
Weight13 Pounds
Width0 Inches
Part Number307-05-0325
Model307-05-0325