As an Amazon Associate I earn from qualifying purchases.
1. Yoursme #ad
Dodge, Rocker Arm Remover Installer & Valve Spring Tool for Chrysler, Jeep 3.7L & 4.7L Engines 3747-123 10102 8426 8387 8516A #adYoursme #ad
- Replace to: alternative to mopar miller 10102-8426, 8387 and 8516A. Materior: constructed from high quality steel with a black oxide finish to resist rust and corrosion for maximum strength and longevity.
Fitment: the valve spring compressor and a rocker Arm Tool fit for 1999~2013 Jeep, Dodge, Chrysler 3. 7 and 4. 7 engines. Usege: a specialty tool, can be used to change broken valve springs or just to install replacement rockers or lifters.
To remove and install rocker arms safely without damage to the camshaft or camshaft lobes. We provide friendly 1 years’ warranty support, easy-to-reach Customer Service and 100% satisfaction guarantee to make sure your investment! Premium support: our focus on products and customer services is 2nd to none. Used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 4. 7 liter Engines.
2. Camoo #ad
Dodge, Camoo Rocker Arm Remover Installer & Valve Spring Compressor Tool for Chrysler, Jeep 3.7 & 4.7L Replace OE# 3747-123 10102 8426 8387 8516A #adCamoo #ad
- Function -- this special rocker arm remover must be used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 4. 7 liter Engines. The valve spring tool allows access at the valve keeper so a magnet can be used to remove it.
Replace oem -- similar to the miller 10102 that does the job of the 8426, 8387 and 8516A used on 3. 7 and 4. 7 dodge engines. Benefits -- it's a specialty tool to remove and install rocker arms safely without damage to the camshaft or camshaft lobes.
Satisfaction guarantee -- if you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying! Application -- for use on dodge, jeep, and for chrysler 3. 7 and 4. 7 liter engines partial listing below, this tool works on 1999 - 2013.
3. ProForm #ad
Proform 66781 Valve Lash Wrench Set #adProForm #ad
- Country of Origin : Taiwan. Package weight: 07 pounds. Package dimensions: 2. 54 h x 26. 416 l x 12. 446 w centimetres. Fit type: Vehicle Specific.
4. Lisle #ad
Lisle 48300 Push Rod Remover #adLisle #ad
- The tool pivots the rocker arm to compress the valve spring and free the push rod for removal. Country of Origin : United States. No need to loosen and retighten the rocker arm. Quickly removes push rods so you can replace the intake gasket.
5. Bonbo #ad
Spring and Rocker Arm Kit, Jeep 3.7 & 4.7L Engines, Similar to 10102, Service Valve Tool 2 Pieces, 8387, Rocker Arm Remover Installer & Valve Spring Compressor Tool Fits for Chrysler Dodge, 8516A #adBonbo #ad
- Widely usedsuitable for 1999-2013 dodge, for Jeep and for Chrysler 3. 7 and 4. 7 liter engines. Functionsit's a specialty tool used to compress the valve springs and access the keeper which is needed when changing the valve springs.
Benefitscan remove and install rocker arms safely without damage to the camshaft or camshaft lobes. Allow access at the valve keeper so a magnet can be used to remove it. A must toolthis special rocker arm remover must be used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters lifters in 4.
7 and 3. 7 liter engines. Replace oemcompatible with miller 10102, it's a valve spring compressor and a Rocker Arm Tool used on 3. 7 & 4. 7 engines in place of 8426, 8387 and 8516A. Also can be switched over to the Rocker Arm Tool when you don't need to access the keeper.
6. Cheriezing #ad
Cheriezing 12 x Rocker Arms 5184296AH + 12 x Valve Lifters 5184332AA Kits compatible with 2011-2019 Chrysler Dodge Jeep Ram 3.6L #adCheriezing #ad
- The compatibility we provide is not 100% correct, 7b0109441B, 5184296AF, But the OE Number is 100% Correct. Please check the part number on your original part before purchasing.
Please check the description for more fitments Or Provide your #VIN to us. Buy with confidence: order from Cheriezing, we offer a 12-Month Warranty, true worry-free shopping experience. Reference oe part number: 5184296ae, 5184296ah, 5184332aa.
Easy to Install. Package included: 12 x rocker arms 5184296AH + 12 x lifters 5184332AA. 100% new and high quality. Fitment / compatibillity: for 2011-2019 chrysler 300, 2011-2019 jeep grand cherokee, 2011-2018 dodge grand Carvan, 2014-2018 Ram Promaster 1500 3.6l engine. Perfect replacement：built to strict quality control standards, 100% tested prior to leaving the factory.
7. Comp Cams #ad
Comp Cams 54702 GM LS Rocker Arm Trunnion Installation Tool #adComp Cams #ad
- Designed for good performance. Part number: 54702-TL. Package dimensions : 4" l x 2. 75" w x 2" H. Country of origin : United States.
|Brand||Comp Cams #ad|
|Manufacturer||COMP Cams #ad|
8. Michigan Motorsports #ad
4.8 5.3 5.7 6.0 6.2 7.0 LS2 LS3 Bushing, Michigan Motorsports LS1 Rocker Arm Trunion Install Tool #adMichigan Motorsports #ad
- Embedded magnet allows one-handed assembly. Ls rocker arm trunion install tool. This tool allows you to easily install trunion upgrade kits into your LS Rocker Arms. Makes the job easy! This ls rocker trunnion install tool makes upgrading your factory rockers a breeze.
This ls engine helper is designed to allow LS rocker trunnions to be upgraded in less than 30-minutes.
Assists with the assembly and disassembly. Can be used on Bearing or Bushing style Trunions. Makes installing an ls trunnion upgrade kit a breeze. Rocker arm and trunions in pictures are not included.
Designed to be used with an arbor press, bench vise and c-clamp, making this device a a versatile tool in anyone's toolbox. Works with a vise, press and c-clamp. This is a must have if you own an LS1, LS2 LS3, LS6 or LS7 engine. An embedded magnet allows the tool to attached to a vice or press and allows one-handed assembly.
9. PIILOO #ad
PIILOO Rocker Arm Remover Installer & Valve Spring Compressor Tool Compatible with Chrysler, Dodge, Jeep 3.7L & 4.7L Engines Replace 3747-123 10102 8426 8387 8516A #adPIILOO #ad
- High quality material--made of high grade cnc machined heavy duty steel with black oxide finish, high precision and strength, not easy to break and bend, anti-rust and anti-corrosion, durability, longer service life.
Benefits--the rocker arm remover installer and valve spring tool set can be used safely without damaging the camshaft or camshaft lobes. The valve spring tool allows access at the valve keeper, so it can be removed by using a magnet.
Must tool--the rocker arm remover is a must tool to allow removal of the camshaft, rocker arm and hydraulic lash adjuster in the 3. 7 and 4. 7 liter engine. Great fitment--compatible with chrysler, jeep, dodge 3. 7l and 4. 7l engines 1999-2013. Replacement--similar to the miller 10102, 8426, 8387 and 8516A, used on 3.7l and 4. 7l engines. This tool set is similar to the original tool and with better performance than that.
10. MOEBULB #ad
MOEBULB 3747 Rocker Arm Remover Installer & Valve Spring Compressor Tool Compatible with Jeep Dodge Chrysler 3.7L & 4.7L Engines #adMOEBULB #ad
- Similar to the 10102 that does the job of the 8426, 8387 and 8516A Compatible with Dodge engines 3. 7 and 4. 7. It's a specialty tool to remove and install rocker arms safely without damage to the camshaft or camshaft lobes.
This special rocker arm remover must be used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 4. 7 liter Engines. The valve spring tool allows access at the valve keeper so a magnet can be used to remove it.
Material : premium grade cnc machined heavy duty steel with black anodized, durability, anti-corrosion and anti-rust, high precision and hardness to provide a much longer service life. Compatible with dodge, jeep, and for chrysler 3. 7 and 4. 7 liter engines partial listing below, this tool works on 1999 - 2013.