Top 10 Oxygen Sensor Tool Removal - Oxygen Sensor Removers

Top 10 Oxygen Sensor Tool Removal - Oxygen Sensor Removers
As an Amazon Associate I earn from qualifying purchases.

1. GOHAWKTEQ

#ad

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

#ad
GOHAWKTEQ #ad - Extra deep broach socket 3-1/8” long, 1-pc 3/8” dr. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 1/2” Dr.

Material: these sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance. Offset crowfoot socket wrench 1-15/16” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Design: special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire. Package: there are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” dr. Usage: this tool sets are used to remove. Warranty: we offer 30 days and 365 days free replacement warranty.
BrandGOHAWKTEQ #ad
ManufacturerGOHAWKTEQ #ad
Part NumberG3001U

2. ABN

#ad

29mm – All Vehicle O2 Removal and Installation, 27mm, ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm 7/8in

#ad
ABN #ad - No more hassle: the abn oxygen 02 sensor socket 7-piece tool kit – 22mm 7/8” inches, 29mm – all vehicle O2 Removal and Installation is for inspection, and installation of hard-to-reach oxygen sensors, thermal sensor switches, removal, vacuum switches, 27mm, oil pressure sending units, oil pressure switches, and brake light switches; Each socket is permanently etched with size marking for your convenience.

Easy storage: heavy-duty 9” x 2. 25” x 8” inch 22. 9cm x 5. 7cm x 203cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Built to last: constructed from chrome-vanadium steel CR-V for extra strength and longevity; Tools have a light coating of oil to protect them from rusting. Contents: package includes 1 29mm pressure/vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 12pt socket + 1 27mm oil pressure sending unit socket + 1 1-1/16 and 1 inch oil pressure sending unit socket + 1 7/8 inch long oxygen sensor socket wrench + 1 7/8 inch short oxygen sensor socket wrench + 1 carrying case.

Matches your car: universal fit for audi, and volkswagen; sizes include 22mm 7/8”, mercedes, vauxhall/open gm, skoda, Peugeot, renault, Citroen, BMW, 27mm, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
BrandABN #ad
ManufacturerABN #ad
Height7.5 Inches
Length9.25 Inches
Weight2.09 Pounds
Width2.5 Inches
Part Number3884

3. ITEQ

#ad

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

#ad
ITEQ #ad - 3 types of universal socket wrenchs cover various situations of oxygen sensor location. Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines. 6-point 7/8” 22mm socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Set including: 1-pc 3/8” dr. Extra deep broach socket 3-1/8” long, 1-pc 1/2” dr. Offset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” Dr.
BrandITEQ #ad
ManufacturerITEQ #ad
Part NumberIT017
Model13

4. GOHAWKTEQ

#ad

Oxygen Sensor Removal Tool Kit 3Pcs 3/8 Inch Drive Oxygen Sensor Socket Wrench

#ad
GOHAWKTEQ #ad - Package includes 2 7/8" 3/8 inch drive vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket. Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust. Usage built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time! Warranty 30 days free return and 365 days free replacement.
BrandGOHAWKTEQ #ad
ManufacturerGOHAWKTEQ #ad
Part NumberG3002U

5. ABN

#ad

ABN Oxygen Sensor Socket Set – 10 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive

#ad
ABN #ad - Convenient storage: the plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; Case measures at 11. 8 x 9. 8 x 2. 5 inches 29. 9 x 24. 9 x 6. 3 cm and features locking latches and a comfortable handle. Contents: this specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6pt x 110mm, 1/2 inch dr x 27mm x 12pt x 78mm, 1/2 inch dr x 7/8” x 50mm, 1/2 inch dr x 28mm x 12pt x 78mm, 1/2 inch dr x 22mm x 12pt x 78mm, 3/8 inch dr x 7/8” x 6pt x 80mm, 3/8 inch dr x 7/8” x 30mm, 1/2 inch dr x 29mm x 6pt x 90mm, 3/8 inch dr x 7/8” x 6pt x 90mm, and 3/8 inch dr x 1” and 1-1/6” x 74mm.

Built to last: constructed of heat-treated chrome vanadium steel, durability, this oxygen sensor remover set is built for strength, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion. Use with your tools: features 3/8-inch or 1/2-inch square drive to fit your o2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench driver tools not included; Not compatible with impact tools; Use this tool in conjunction with the ABN O2 Sensor Thread Chasers to install new sensors easily thread chaser and sensors not included.

Remove oxygen sensors from your vehicle: the abn 10 piece specialty sockets o2 sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles.
BrandABN #ad
ManufacturerABN #ad
Height2.5 Inches
Length11.8 Inches
Weight6.39 Pounds
Width9.8 Inches
Part Number4138
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

6. A ABIGAIL

#ad

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

#ad
A ABIGAIL #ad - Our aim is to make you satisfy the parts and the service we provide for you. Offset crowfoot socket wrench 1-15/16” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Service100% satisfaction guarantee, parts, replacement, simply contact customer service for troubleshooting help, if you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, or refund.

Extra deep broach socket 3-1/8” long, 1-pc 3/8” dr. Use built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. Material made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 1/2” Dr. Design standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. This high quality tool can save your time! Package1-pc 3/8” dr.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7841F

7. Carock

#ad

Carock Oxygen Sensor Wrench 22mm Flexible Head O2 Sensor Wrench 7/8" Removal Install Tool

#ad
Carock #ad - Oxygen sensor wrench 22mm; O2 Sensor Wrench 7/8". Flexible o2 sensor wrench works around the exhaust. The 22mm 7/8" oxygen sensor wrench helps to get additional clearance. Fit oxygen sensor that use 7/8"22mm hex, which is on most mid-sized trucks, SUVs and vans. Quickly remove and exchange difficult O2 sensors with 7/8" 22 mm hex wrench. Swivel head helps create extra leverage in narrow area.
BrandCarock #ad
ManufacturerCAROCK #ad
Part Number02CR-TL01001

8. Tribus Tools

#ad

Tribus Tools Oxygen and NOx Sensor Wrench 15/16"

#ad
Tribus Tools #ad - Save time with our patented racheting flare nut technology. Flex head design gets you into the tightest spots. Strong enough for every job with the speed of a rachet. Made in America. Strong enough to put your weight into to break rusted sensors loose. Easier and faster o2 and NOx sensor removal. This wrench replaces ALL sockets. Stop rounding and ruining fasteners and save money. The wrench has 4 degrees range of motion; every click is 4 degrees. The world's strongest ratcheting o2 and NOx sensor wrench. Lifetime warranty - buy it once, use it for a lifetime.
BrandTribus Tools #ad
ManufacturerTribus Tools #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberParent PN

9. MIKKUPPA

#ad

MIKKUPPA 5 pcs Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set

#ad
MIKKUPPA #ad - Package includes - 1-pc 3/8” dr. Offset crowfoot socket wrench 1-15/16” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 1/2” Dr. Our aim is to make you satisfy the parts and the service we provide for you.

Easy to use - use one of the socket wrenches to turn and loosen the sensor, then clean the manifold threads with the thread chaser; We recommend using the crowfoot socket to initially loosen the sensor as it generates more torque, then use the other socket once the sensor is free. Worry-free - if you have any issues with the oxygen sensor socket Wrench and Thread Chaser Set, parts, replacement, simply contact customer service for troubleshooting help, or refund. Built to last - oxygen sensor socket constructed from chrome-vanadium steel CR-V; Tools have a light coating of oil lubrication to prevent rusting; Protect wires with the side cutout that prevents damage to wires and provides clearance for a wire harness so the wires do not get in the way when you are working.

Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines. Extra deep broach socket 3-1/8” long, 1-pc 3/8” dr. Applications widelya - this oxygen sensor tool 5pcs set sets are used to remove.
BrandMIKKUPPA #ad
ManufacturerMIKKUPPA #ad
Part NumberQRT026

10. Kwiksen

#ad

Kwiksen 70039 | 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket Wrench Removal Tool

#ad
Kwiksen #ad - Size7/8 in(22mm)hexagon fits almost all oxygen sensors,3/8 in drive for ratcheting Handle,it will be very convenient to install o2 sensor. Qualitymanufactured with high-temperature stainless steel to bring longer lifespan.

Warrantyyour satisfaction is our target to achieve. So, if you have any question please contanct with us, just return it and get a full refund, if you don't like it, we are waiting for your coming, we will provide quality service for you. Easy to useadapted to all oxygen sensor, like 15719 15718 15717 15716 234-4668 15717 234-4162 234-4797 234-9051 17025 234-4260 234-4209 234-4588 234-9009 15716 13026 15703 15719 234-4018 234-5010 15664 15510 234-4622 17018 234-4154 13231 234-4621 24642 213-1325 234-9005 234-4800 27110 17098 23099 234-4099 234-4169 17321 213-3533 250-25005 234-4012 13100 afs106 234-4092 afs123 15718 23135 234-4132 234-4445 13675 15896 60012 21003 23159 213-4537 13477 13138 234-4261 234-9007 15895 234-4626.

Designreplacement for 70039 47749 648691 12230 70094 13474 27162 648442.
BrandKwiksen #ad
ManufacturerKwiksen #ad
Part NumberGQLG-0434972587