As an Amazon Associate I earn from qualifying purchases.


Also it is sturdy enough to support your lift point while soft enough to preventing crushing the contact area;. Materialmade of premium quality rubber material; durable and Practical; Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while ! Universal fitmentsize: 7.
5*2. 5cm/2. 95*2. 95*098"; we have specified jack pads' dimension on the picture, Please check your jack's size/dimension before your purchase. If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Provide supportjack support cushioning pressure pad, could effectively resist pressure, can cope with extreme environments, give travel more protection. Pinch weld protectorprotect the car body when jacking up the vehicle.

Putting the rubber jack pad on the jack can provide the protection with your vehicles and jack, firstly, secondly, your car will aviod the vehicle chassis bending and breaking, it can extend service life of the jack.


With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height. No more climbing up into the truck looking for your block of wood, risking injury. Not to be used with C channel or I-beam frames.
It has a 5000 lb. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. Capacity for any foot or post, round or square and a 2500 lb. Wheel dock capacity. For rv's, boating and Most Bumper Pulled Trailers. Durable: gen 1 is extremely durable, water, mud and most other environmental hazards. Drive with it safely attached to your trailer.



2 per pack. Fits an array of jacks, stands and vehicles -- our pucks are made to fit a wide array of jacks / jack stands and vehicles. Made from high quality material, highly durable rubber, Built To Last -- Made from a blend of purpose-specific, our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike.
No more damage to pinch welds, paint scratches or metal damage. Protects your vehicle and your jack -- our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that's doing the heavy lifting.

Compatible with most hi-lift jacks:designed and used for most of hi-lift jacks, includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture JackEJ-550.
If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. No-risk purchase! unconditional 30-day money-back guarantee. Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.
1. FIVE BANANAS
#ad
5#, Car Black Anti-Slip Rail Pinch Weld Adapter Support Block Heavy Duty for Car Lift 4 Pack, FIVE BANANAS Jack Rubber Pad
#adFIVE BANANAS #ad - Durable rubber construction, which is soft enough to absorb the car weight while strong enough to support the car. It will prevent your frame rails and pinch welds from bending when using a jack to lift your car, and it can also protect painted or coated suspensions components.More information #ad
One car jack rubber Pad. Note:jack not included. The rubber pad adds extra grip when raising the car and reduce slipping, it is stable. Size: 2. 95x2. 95x098"lxwxh groove width: app. 039" groove depth: app. 039".Brand | FIVE BANANAS #ad |
Manufacturer | Five Bananas #ad |
Height | 0.98 Inches |
Length | 2.95 Inches |
Width | 2.95 Inches |
Part Number | FBUS05 |
More information #ad
2. Rotary
#ad
Auto Lift/Rolling Jack Rubber Block Pad Adapter Set of 4 2-1 1/2" and 2-3"
#adRotary #ad - See our other listings for other quantities. Rubber pad surface measures 4-3/4" x 6-5/16. Includes 2 1 1/2" thick and 2 3" thick. This listing is for a set of 4 flat polymer adapter used to protect vehicles with factory applied undercoating.More information #ad
Per adapter. 3, 000 lbs. These blocks are reinforced with fibers and may be rough on the bottom side where the mold marks are ground off as shown.Brand | Rotary #ad |
Manufacturer | Rotary Lift #ad |
Part Number | FJ7427 / FJ7428 |
More information #ad
3. Hitter
#ad
Hitter Jack Rubber Pad, Car Black Anti-Slip Rail Adapter Support Block Heavy Duty for Car Lift(4 pcs)
#adHitter #ad - Best protection for your car undercarriage: jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand. Package included4 x jack pad slotted frame rubber; no-risk purchase! unconditional 30-day money-bACK GUARANTEE.Also it is sturdy enough to support your lift point while soft enough to preventing crushing the contact area;. Materialmade of premium quality rubber material; durable and Practical; Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while ! Universal fitmentsize: 7.
More information #ad
5*7. 5*2. 5cm/2. 95*2. 95*098"; we have specified jack pads' dimension on the picture, Please check your jack's size/dimension before your purchase. If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Provide supportjack support cushioning pressure pad, could effectively resist pressure, can cope with extreme environments, give travel more protection. Pinch weld protectorprotect the car body when jacking up the vehicle.
Brand | Hitter #ad |
Manufacturer | Hitter #ad |
Part Number | Jack Pad-04 |
More information #ad
4. XuSha
#ad
XuSha Heavy Duty Jack Rubber Pad Jack Pad Adapter Pinch Weld Anti-Slip Rail Adapter Support Block for Car Lift 4pcs
#adXuSha #ad - Material: highly durable and resistant to damage, bent, it will keep the chassis rails from getting pinched, and broken. It is sturdy enough to protect the car undercarriage when lifting the car by using the jack.Putting the rubber jack pad on the jack can provide the protection with your vehicles and jack, firstly, secondly, your car will aviod the vehicle chassis bending and breaking, it can extend service life of the jack.
More information #ad
Note: jack is not included. Different dimension and shape meet different needs, please check it before purchasing. Polyurethane is soft enough to not harm your vehicle's metal yet rigid enough to support it.Brand | XuSha #ad |
Manufacturer | XuSha #ad |
Part Number | [email protected]#XSUS |
More information #ad
5. Rotary
#ad
Rotary FJ2428
#adRotary #ad - See our other listings for other quantities. This listing is for a set of 2 flat polymer adapter used to protect vehicles with factory applied undercoating.More information #ad
3, 000 lbs. Rubber pad surface measures 4-3/4" X 6-5/16. Includes 2 3" thick adapters. Per adapter. These blocks are reinforced with fibers and may be rough on the bottom side where the mold marks are ground off as shown.Brand | Rotary #ad |
Manufacturer | VSG DOVER #ad |
Part Number | FJ2428 |
More information #ad
6. Dock N Stow
#ad
Utility Travel Accessories, Secures with a Bungee, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Dock N Stow Trailer Jack Stand, GEN 1, Boat, Wheel, RV Camper, Pop Up
#adDock N Stow #ad - Space-saver: gen 1 sits directly on 2, 2. 5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need.With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height. No more climbing up into the truck looking for your block of wood, risking injury. Not to be used with C channel or I-beam frames.
More information #ad
Safety: gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. Multi-use: dock n stow gen 1 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. Capacity for any foot or post, round or square and a 2500 lb. Wheel dock capacity. For rv's, boating and Most Bumper Pulled Trailers. Durable: gen 1 is extremely durable, water, mud and most other environmental hazards. Drive with it safely attached to your trailer.
Brand | Dock N Stow #ad |
Manufacturer | Dock N Stow #ad |
Height | 6.25 Inches |
Length | 7 Inches |
Weight | 3.36 Pounds |
Width | 7 Inches |
Part Number | GEN1 |
Warranty | Dock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device. |
More information #ad
7. Fasmov
#ad
Fasmov 4-Pack of Jack Pads Rubber Protector Slotted Frame Rail Protector
#adFasmov #ad - Made from highly durable rubber. Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area. Fits most floor jacks and vehicles, please check fitment below, does not fit Trolley Jacks.More information #ad
Pad dimensions: 72mm diameter 33mm Height, Slot Dimensions: 10mm Wide 13mm deep. Prevent your frame rails and pinch welds from bending when using a Jack to lift your car.Brand | Fasmov #ad |
Manufacturer | Fasmov #ad |
Part Number | JackPads-4pcs-F |
Model | JackPads-4pcs-F |
More information #ad
8. EAZ LIFT
#ad
2 Pack 48830, Eaz-Lift 24" RV Stabilizing Scissor Jack, Fits Pop-Up Campers and Travel Trailers, Supports Up to 7,500 lb.
#adEAZ LIFT #ad - Effortlessly stabilizes RVs: Scissor jacks have a certified 7500 lb. Easy to install: Allows either bolt-on or weld-on installation. Adjustable height: can be adjusted from 4-3/8-inches high to 23-3/4-inches.More information #ad
Includes: 2 scissor jacks and 1 scissor jack socket for power drill. Load capacity. Supports a variety of Vehicles: Designed to support pop-ups, trailers and other large vehicles. Durable construction: Made of heavy-duty steel and powder-coated to resist corrosion and rust.Brand | EAZ LIFT #ad |
Manufacturer | Camco #ad |
Height | 12.6 Inches |
Length | 5.5 Inches |
Weight | 5 Pounds |
Width | 28.47 Inches |
Part Number | 48830 |
Model | 48830 |
Warranty | One Year Limited Warranty |
More information #ad
9. Mission Automotive
#ad
Frame Rail Protector Puck/Pad Keeps Pinch Weld, Paint and Metal Safe, Mission Automotive 2-Pack of Rubber Jack Pads Slotted Pucks, Standard-Size Adapter, Universal
#adMission Automotive #ad - Dimensions -- pad dimensions: 7. 2 cm / 2. 8 inches in diameter, 3. 3cm / 1. 3 inches tall. Value pack -- our set includes two jack pads, providing the value you need to get the job done right - without sacrificing quality.2 per pack. Fits an array of jacks, stands and vehicles -- our pucks are made to fit a wide array of jacks / jack stands and vehicles. Made from high quality material, highly durable rubber, Built To Last -- Made from a blend of purpose-specific, our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike.
More information #ad
Their universal size allows them to meet a wide-array of needs, though exact fit will vary. No more damage to pinch welds, paint scratches or metal damage. Protects your vehicle and your jack -- our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that's doing the heavy lifting.
Brand | Mission Automotive #ad |
Manufacturer | Mission Automotive #ad |
Height | 1.3 Inches |
Length | 5.6 Inches |
Weight | 0.5 Pounds |
Width | 2.8 Inches |
Part Number | MA3028 |
Model | BHBUSAZIN025308 |
More information #ad
10. Seven Sparta
#ad
Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red
#adSeven Sparta #ad - A drilled hole in center of base attached to your jack bar, store it easy. Give the off-road Base better footing and greater stability during the lifting process. Heavy duty and easy to carry: made of a tough pp synthetic material, better more than a chunk of wood will not rot or break.Compatible with most hi-lift jacks:designed and used for most of hi-lift jacks, includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture JackEJ-550.
More information #ad
One side with serrated teeth: helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. No-risk purchase! unconditional 30-day money-back guarantee. Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.
Brand | Seven Sparta #ad |
Manufacturer | Seven Sparta #ad |
Part Number | 122801 |
More information #ad