Top 10 Heavy Duty Shocks for - Automotive Replacement Shocks

Top 10 Heavy Duty Shocks for - Automotive Replacement Shocks
As an Amazon Associate I earn from qualifying purchases.

1. Monroe

#ad

Monroe Shocks & Struts Load Adjusting 58643 Shock Absorber

#ad
Monroe #ad - Consistent ride -- oe all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces.

Capacity limited by suspension, calibrated coil spring reduces sag when loaded up to 1, tires and transmission; see owner's manual. Reduces sag under load -- ideal for occasionally hauling or towing varying loads; heavy gauge, 200 lbs. Longer service life -- self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life.

Improves performance -- nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade. Exceptional handling -- tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency.
BrandMonroe #ad
ManufacturerTenneco #ad
Height3.7 Inches
Length25.5 Inches
Weight11.02 Pounds
Width7.2 Inches
Part Number58643
Model58643

2. LAFORMO

#ad

2 Pack EZGO Medalist/TXT Front/Rear Coil Over Heavy Duty Shocks 1994+ Newer Gas or Electric 70630-G01

#ad
LAFORMO #ad - Part of your vehicle's rear suspension that along with the spring, controls the up-and-down motion of your wheels. Includes: 2 x 18" heavy duty Shocks includes all the needed bushing hardware. Will not fit on Marathon or RXV Golf Carts. Br>. Fits the following carts: 1994-up ezgo txt/medalist gas and electric models. Shocks should be replaced if you experience leakage or bottoming-out. Important: if it's a little too long for you please compress the springs to get them to fit. 1 year unlimited-mileage quality guarantee.
BrandLAFORMO #ad
ManufacturerLAFORMO #ad
Part NumberLFMSAVW001

3. ACDelco

#ad

ACDelco Specialty 525-68 Heavy Duty Rear Shock Absorber

#ad
ACDelco #ad - Larger body allows for increased fluid capacity and cooler running for superior performance. The super finished, chromed, piston rod provides anti-corrosion support, a more consistent wear surface, proper seal lubrication, and longer product life. Heavy duty arc-welded end mounts for maximum strength and greater resistance to damage. Extra-large 1-5/8 inch piston bore and 9/16 inch piston rod diameter for excellent stability and strength. Bonded iron piston and compression head provides exceptional durability.
BrandACDelco #ad
ManufacturerACDelco #ad
Height3.3 Inches
Length20 Inches
Weight1 Pounds
Width4.1 Inches
Part Number525-68
Model525-68
WarrantyLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.

4. ARANA

#ad

20 inch 150 Lbs 667 N Gas Spring Shock Struts C16-17566 for Heavy-duty Floor Hatch Truck Tonneau Cover Camper RV Bed Large Outdoor Box Lid Trap Door Suitable weight: 125-165 Pounds

#ad
ARANA #ad - 20" replacement lift support shocks - if you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "ask seller" besides your order from us for immediate assistance!20 inch 150lbs/shock replacement lift supports struts -- extended size 19.

7inch, compressed size 11. 8inch; 150 pounds per shock, 300 Pounds per set; 2 lift struts included in each set. 2 pcs 150 pounds per shock lift supports - most suitable support weight lid is 125-165 pounds; super strong, if you need, couldn't be installed on window or compressed by hands directly before installing! Installation instruction and ball studs are included, but NO BRACKETS, ONLY FIT FOR HEAVY LID! 2 pcs 300 pounds per set gas spring shocks - very strong, please search "B07SFH58QR" for matched ARANA ball stud mount brackets;.22

2 pcs 20" gas prop replacement struts -- arana 20" gas prop shocks will help you support your heavy duty bench box lid, AD board, boat hatch or floor hatch cover, truck Camper RV bed, or home-build window, etc. Important: suitable support weight is between 125 to 165 pounds;.
BrandARANA #ad
ManufacturerArana #ad
Part NumberARA_287

5. Jake's Lift Kits

#ad

Jake's Lift Kits Yamaha Heavy Duty Shock Set for G2,G8,G9 & Select Drive2 Models

#ad
Jake's Lift Kits #ad - Fits yamaha g2, g8, g9 gas & Electric models and Drive2 Electric models. A must have for carts with Rear Seats or Cargo Boxes.
BrandJake's Lift Kits #ad
ManufacturerJAKE'S LIFT KITS #ad

6. ARANA

#ad

2 Pcs Set ARANA, 28 inch 200 Lbs 889 N Gas Struts Spring Shocks 28" for Heavy Duty Trailer Cap Tonneau Cover Lift Supports Support Weight: 170-230lbs

#ad
ARANA #ad - 28 inch 200 lbs lift supports -- 10 mm metal end fittings, 200 lbs per strut, 2 struts included for Each Set!DO NOT compress them by hands before installing, extended length from center mount to Center Mount is 28 inch, the struts could only be compressed after installing successfully!!!.28" 200 lb gas struts -- long-size gas struts, very strong, suitable to use on sled trailer, trap door, large heavy-duty floor hatch door, outdoor well pit; fit for the lid with length 56inch at least and the lid weight between 170 - 230 pounds;;.

28" 200 pounds gas shocks -- compatible with the following oem numbers:100-175, se1000200me, 3100-200, avm100-200, 12161, 8195618, se1000-200me, avm100-175, spd3100200, gs3100200, avm100-200me, 3100175, 100-200, spd-3100-200, 3100200, st280M200. Note: if the lid weight is less than 170lbs or more than 220 pounds, please choose other pressure struts!!!18 month support -- 18 months replacement support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to message with us for immediate assistance!28 inch 200 pound gas springs -- super strong, couldn't be installed on window or compressed by hands directly before installing, MESSAGE us for immediate help! IMPORTANT: Super Strong and Super Long, if you find the shocks couldn't be compressed and your lid couldn't be closed after installing, please make sure to measure your project lid before purchasing!.

BrandARANA #ad
ManufacturerARANA #ad
Part Numberara_302a
WarrantyIf the product received couldn't fit for your application, please DO message us for a best solution, without returning the previous package!!!

7. ARANA

#ad

Pack of 2, 20 inch 100lbs Gas Strut C16-08054 Heavy Duty Gas Spring Shocks for Tonneau Cover Camper RV Bed Floor Hatch Door Suitable Support Lid Weight: 85~110lbs

#ad
ARANA #ad - Fitment: 20" 100 lbs gas shocks struts force 100 lbs 445 n per strut, most suitable lid weight: 85-110 Pounds for Each Pair!!! NOTE: If the lid weight is less than 80lbs or more than 115 pounds, 2 struts included in each pair, please choose other pressure struts!!!.

Must-read notice: very strong, do measure the lid weight and and the dimension of your original shocks to avoid buying wrong item!!! How to let us help you? -- 18 months replacement support to ensure your no-worries using; brand new set will be offered without returning the last set, do not buy them for the lid weight less than 80 pounds, just click "ASK SELLER" besides your order of this ARANA 20 inch gas shocks! .220inch gas struts shocks could be used as direct replacement struts for RV king/queen size bed, tv cabinet door, floor hatch, camper bed; they could also be used on the tonneau cover, compartment door, motorhome bed, shed window, heavy camper shell roof, tanning bed, etc;.

Dimension: pack of 2 20" c1608054 gas prop lift supports extended length in: 19. 69 500mm, end fittings: 10 mm diameter; note: DO NOT compress them by hands before installing, Compressed Length in: 11. 8 300mm, the struts could only be compressed after installing successfully!!! .
BrandARANA #ad
ManufacturerARANA #ad
Part NumberAR-232ABR
ModelAR-232ABR

8. Gabriel

#ad

Gabriel 85000 FleetLine Heavy Duty Shock Absorber

#ad
Gabriel #ad - 360 degree arc welded end mounts protect against end mount breakage. Multi-lip piston rod seal provides backup seal protection. Class 6-8 trucks, buses and trailers. Welded closure for maximum tensile strength. Hydraulic rebound stop prevents impact damage to the shock and vehicle mounting components.
BrandGabriel #ad
ManufacturerGabriel #ad
Weight5.93 Pounds
Part Number85000
Model85000

9. Vepagoo

#ad

A Set of 2 with L Mounts, 15 Inch 67lb/300N Per Gas Shock Strut Spring for Tool Box Outdoor Cabinets Boat Bed Cover Door Lids and Other Custom Heavy Duty Project

#ad
Vepagoo #ad - The ball Connector is removable and rotatable. Super strong and stiff, you couldn't compress them by your hand!! Suitable for lids or doors weighing between 50 pounds and 100 pounds! Side lengths Over 35 INCHES! Parameter extended length: 14.

96in 380mm, compressed length: 9. 06in 230mm, force: 300 n/67Lbs Per Strut. 12+1 month replacement welcome to click "ask seller" beside yoUR ORDER for In-time Assistance if any problem occurs. No screws included. Supper strong 67lb/300n per strut, two are 134lb/600n. Tipsif you feel it is too powerful to close and you have a lot of flexibility in where they can mount, you can move the mount point on the lid towards the hinges' direction.

Application most used for heavy-duty equipment such as bed with a small compartment, trailer door, heavy toolbox lid, outdoor TV Cabinet, trap door, trash bin, camper shell, truck canopy, marine projects, and other custom Medium or Heavy project.
BrandVepagoo #ad
ManufacturerVepagoo #ad
Weight1.54 Pounds
Part NumberST-0100256
WarrantyLifetime Warranty for Normal Use Damages

10. Monroe

#ad

Monroe Shocks & Struts Load Adjusting 58651 Shock Absorber

#ad
Monroe #ad - Reduces sag under load -- ideal for occasionally hauling or towing varying loads; heavy gauge, 200 lbs. Improves performance -- nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade.

Capacity limited by suspension, calibrated coil spring reduces sag when loaded up to 1, tires and transmission; see owner's manual. Consistent ride -- oe all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces.

Exceptional handling -- tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency. Longer service life -- self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life.
BrandMonroe #ad
ManufacturerTenneco (Rancho/Monroe) #ad
Height3.7 Inches
Length29.5 Inches
Weight17.64 Pounds
Width7.3 Inches
Part Number58651
Model58651