As an Amazon Associate I earn from qualifying purchases.

1. Craftsman

#ad

8 & 10-Inch, CRAFTSMAN Pliers, 2-Piece Groove Joint Set CMHT82547

#adCraftsman #ad - Precision machined jaws for gripping, and holding. 2-piece set. Full lifetime warranty, refer to "Warranty & Support" section below for full details. Drop forged steel for strength and durability. Multi-zone bi-material grips for comfort and control.

Brand	Craftsman #ad
Manufacturer	CRAFTSMAN #ad
Part Number	CMHT82547
Model	CMHT82547

2. Channellock

#ad

Silver, Black, Channellock 440 Tongue and Groove Pliers | 12-Inch Straight Jaw Groove Joint Plier with Comfort Grips | 2.25-Inch Jaw Capacity | Laser Heat-Treated 90° Teeth| Forged High Carbon Steel | Made in USA, Blue

#adChannellock #ad - Patented reinforcing edge minimizes stress breakage. Made in the USA. Channellock blue grips for comfort. Undercut tongue & groove design won't slip. Right angle, laser heat-treated teeth grip better and last longer. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention. Permalock fastener eliminates nut and bolt failure.

Brand	Channellock #ad
Manufacturer	Channellock #ad
Height	0.5 Inches
Length	12 Inches
Weight	1.64 Pounds
Width	1.81 Inches
Part Number	440
Model	440
Warranty	All CHANNELLOCK pliers, wrenches, and drivers are warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service.

3. WORKPRO

#ad

Nuts, WORKPRO 8-inch Adjustable Water Pump Pliers, Groove Joint Pliers for Home Repair, Gripping, Bolts, Pipe & Fittings

#adWORKPRO #ad - Undercut tongue & groove design won't slip and the pliers feature powerful parallel jaw-grip, tremendous leverage. Multi-purpose application pliers - makes a great addition to any home maintenance or on-the-job toolbox.

Hardened teeth - gripping surfaces with special hardened teeth allow high wear resistance and stable gripping. 5 position setting - the adjustable jaws with 5 position settings for use on many different diameters of items in a number of different configurations - round, hex or square. Long-lasting and durable pliers - Nickel-Plated Finish for corrosion-resistance and super durability.

Ergonomic & comfortable handle – built with bi-material that is designed to fully adjust to the user`s hand and so enable greater handling and work safety. 35mm maximum jaw capacity. Hardened precision machined jaws last longer and grip better. Perfect for plumbers and diY homeowners: gripping, pulling, tightening & loosening nuts, bolts, pipe & fittings.

Brand	WORKPRO #ad
Manufacturer	HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD #ad
Height	1 Inches
Length	8 Inches
Width	2 Inches

4. Channellock

#ad

12-Inch, 6.5-Inch | Groove Joint Pliers | Laser Heat-Treated 90° Teeth| Forged from High Carbon Steel | Patented Reinforcing Edge Minimizes Stress Breakage | Made in USA, 9.5-Inch, Channellock GS-3 3 Piece Straight Jaw Tongue and Groove Pliers Set

#adChannellock #ad - 5", 9. Set includes: 6. Right angle, laser heat-treated teeth grip better and last longer. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention. Patented reinforcing edge minimizes stress breakage. Undercut tongue & groove design won't slip. Channellock Blue grips for comfort. Permalock fastener eliminates nut and bolt failure. 5" & 12" tongue & groove.

Brand	Channellock #ad
Manufacturer	Channellock #ad
Height	1 Inches
Length	16 Inches
Weight	2.6 Pounds
Width	9.25 Inches
Part Number	CHLGS-3
Model	GS-3

5. WORKPRO

#ad

WORKPRO 7-piece Pliers Set 8-inch Groove Joint Pliers, 6-inch Slip Joint, 7-inch Linesman, 8-inch Slip Joint for DIY & Home Use, 4-1/2 Inch Long Nose, 6-inch Diagonal, 6-inch Long Nose

#adWORKPRO #ad - Tips: pliers are covered in grease to prevent getting rusty, wipe grease off before using. Hardened cutting edges: Long-lasting, increased cutting ease and performance.

The set includes: 8-inch groove joint, 8-inch and 6-inch slip joint, 6-inch and 4. 5-inch long nose, 7-inch linesman, and 6-inch diagonal pliers. Comfort grip handle: Double-dipped coating to ensure safe and secure non-slip handling. Wipe these pliers before using then store them in a dry environment. Drop forged polished steel: heat treated durable body construction. Convenient for: diy home maintenance, garden projects and more! Great additions to your existing basic tool set. Covered slushing oil for rust protection.

Brand	WORKPRO #ad
Manufacturer	Hangzhou Great Star Industrial Co.,LTD. #ad
Height	1.97 Inches
Length	7.87 Inches
Weight	2.34 Pounds
Width	0.59 Inches
Part Number	8379857
Model	W001306A

6. TEKTON

#ad

TEKTON 16 Inch Groove Joint Pliers 4-1/4 in. Jaw | 37526

#adTEKTON #ad - Slim, nonslip grips provide comfort and control without adding bulk. Undercut tongue and grooves interlock for superior joint strength. Jaw capacity. Sharp, angled pipe-wrench-style teeth offer a sure bite. 4-1/4 in. Nut and bolt fastener allows fine‐tuning of operating tension. Made in USA.

Brand	TEKTON #ad
Manufacturer	TEKTON #ad
Height	0.8 Inches
Length	16.3 Inches
Weight	2.65 Pounds
Width	4 Inches
Part Number	37526
Model	37526
Warranty	Always Guaranteed: [email protected]

7. IRWIN

#ad

IRWIN Tools VISE-GRIP Groove Joint Pliers, Curved Jaw, 6-Inch 2078506

#adIRWIN #ad - Machined jaws for maximum gripping strength. Anti-pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue. Constructed from durable nickel chromium steel; induction-hardened cutting edge stays sharper, longer. Rust-resistant finish. Right angle teeth grip in all directions - maximum bite - No slip jaw action. Curved jaw pliers are versatile to grip a variety of work surfaces. Backed by the irwin tools VISE-GRIP lifetime guarantee.

Brand	IRWIN #ad
Manufacturer	IRWIN #ad
Height	0.75 Inches
Length	10 Inches
Weight	0.43 Pounds
Width	2.75 Inches
Part Number	2078506
Model	2078506
Warranty	Full Lifetime Guarantee - Each IRWIN hand tool is warranted to be free from defects in material and workmanship for the life of the tool under normal wear and tear, except for damage caused by misuse or alteration.

8. Channellock

#ad

Channellock 442 Tongue & Groove Pliers | 12" V-Jaw Groove Joint Pliers For Round Stock & Tubing | Laser Heat-Treated 90° Teeth| Forged From High Carbon Steel | Made In USA

#adChannellock #ad - Right angle, laser heat-treated teeth grip better and last longer. Made in the USA. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention. Channellock Blue grips for comfort. Permalock fastener eliminates nut and bolt failure. Undercut tongue & groove design won't slip. V jaws give you more points of contact on round stock and tubing. Patented reinforcing edge minimizes stress breakage.

Brand	Channellock #ad
Manufacturer	Channellock #ad
Height	1 Inches
Length	14 Inches
Weight	1.78 Pounds
Width	4 Inches
Part Number	CHL442
Model	442
Warranty	warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service.

9. IRWIN

#ad

IRWIN Tools VISE-GRIP Tools GrooveLock Pliers, 6-inch 4935351, V-Jaw

#adIRWIN #ad - Tongue and groove pliers have right angle teeth to grip in all directions for maximum bite. A simple push of a button adjusts the lower jaw twice faster than traditional groove joint pliers. Adjustable pliers with multi-groove Ratcheting System have twice the groove positions of other groove joint pliers, for precise positioning to grip any type of surface. Anti-pinch, control, non-slip ProTouch Grips provide comfort, and less hand fatigue. Metal injection Molding process for precision parts delivers strength and exceptional performance.

Brand	IRWIN #ad
Manufacturer	IRWIN #ad
Height	8.75 Inches
Length	2.5 Inches
Weight	0.3 Pounds
Width	0.75 Inches
Part Number	4935351
Model	4935351
Warranty	Lifetime Warranty from Manufacturers Defect

10. IRWIN

#ad

3-Piece 1773638, IRWIN Tools VISE-GRIP Groove Joint Pliers Set

#adIRWIN #ad - Protouch grips provide extra comfort and help reduce hand fatigue. 3-piece irwin vise-grip pliers set contains 6-inch, 8-inch and 10-inch straight-jaw pliers. Includes gj6, gj8 and GJ10R models. Lifetime Guarantee. 3-piece irwin vise-grip pliers set contains 6-inch, 8-inch and 10-inch straight-jaw pliers. Right-angle teeth grip in all directions for maximum bite. Lifetime Guarantee. Includes gj6, gj8 and GJ10R models. Right-angle teeth grip in all directions for maximum bite. Protouch grips provide extra comfort and help reduce hand fatigue.

Brand	IRWIN #ad
Manufacturer	Irwin Tools #ad
Height	12 Inches
Length	12.19 Inches
Weight	1.9 Pounds
Width	9.19 Inches
Part Number	1773638
Model	1773638
Warranty	Lifetime Guarantee