Top 10 Gear Puller Small – Automotive Replacement Windshield Wiper Arms

As an Amazon Associate I earn from qualifying purchases.



OTUAYAUTO Battery Terminal and Wiper Arm Puller

OTUAYAUTO #ad - Jaw opening: 1/16" - 1-1/16" 6-28mm; outer diameter:1-7/8" 48mm. Easy and safely to remove the stuck on the wiper arm. Also removes bolted on windshield wiper arms that fit over a tapered spline. This puller designed for professionally dual-purpose use. Use to remove battery terminal clamp without damage to cause battery post. Tighten knurled cone to force jaws under the cable clamp.
ManufacturerOTUAYAUTO #ad
Part NumberQAP001

2. ABN


And 6in Removal Tool Kit for Slide Gears, and Flywheel, 4in, Pulley, ABN 3-Jaw Gear Puller Set – 3in

ABN #ad - Multi-position design: universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths.

Durable 3 jaw puller set: use the abn 3, 4, and 6-inch small gear puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears. Works with your tools: tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal. Built to last: forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.

Damage-free removal: manual bearing pullers remove slide gears, bearings, bushings, pulleys, and flywheels without causing damage to your application.
BrandABN #ad
ManufacturerABN #ad
Height9.75 Inches
Length5.2 Inches
Weight6.55 Pounds
Width4.9 Inches
Part Number0302

3. E-flite


E-flite Gear Puller: 1mm-5mm Shaft, EFLA212

E-flite #ad - Model number: EFLA212. Item package height: 079921259761". Item package width: 3. 29921259506". Item package length: 3. 99999999592".
BrandE-flite #ad
ManufacturerHorizon Hobby #ad
Height0.82 Inches
Length3.9 Inches
Weight0.33 Pounds
Width2.6 Inches
Part NumberEFLA212

4. Arcan


Arcan Hardened 4-Inch Gear Puller with Reversible Jaws AS4GP

Arcan #ad - Jaw reach: 2. Jaw spread: 6. Chrome finish: Easy to clean and reduces oil and grease build up. Heat treated chrome vanadium steel- added strength that lasts longer than standard hardened steel gear pullers. Reversible jaws: 8 adjustable positions that allow for inside and outside grip. Damage free removal- removes slide gears, pulleys, and flywheels off of a shaft without damaging your application. 7". 5".
BrandArcan #ad
ManufacturerArcan #ad
Height5 Inches
Length5 Inches
Width5 Inches
Part NumberAS4GP
Warranty1 Year

5. Pro-Grade



Pro-Grade #ad - 3-ton capacity. Made from hardened carbon steel for maximum strength. Fine thread center bolt for controlled pull. 2 or 3 reversible jaws for inside or outside pulling needs. Lifetime Warranty.
BrandPro-Grade #ad
ManufacturerAllied International #ad
Height3.5 Inches
Length9.3 Inches
Weight1.2 Pounds
Width6.6 Inches
Part Number18212

6. MaxPower


Bearings and Flywheels, 1.2 Ton, Reversible Puller Made with Drop-Forged and Heat-Treated Cr-V Steel, MAXPOWER 2-Jaw Gear Puller 4 Inch, Pulleys, 8-Way Internal and External Removal Tool for Gears

MaxPower #ad - Rust prevention & corrosion resistance – two jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Make it deal for pulling work in confined areas. Perfect for you to smoothly and safely slide gear, and flywheel off the shaft.

Versatility – jaw spread: 4in, pulley, bearing, jaw reach: 5in. Durable material – drop-forged cr-v steel jaws are heat-treated for extra strength and durability. Damage-free removal – two-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Drive screw is covered by black phosphating.

Achieve more with its adjustable and reversible jaws. Made with carbon steel and heat-treated for durability, the drive screw runs smoothly under pressure. Reversible jaws with two holes achieve both inside and outside grip in short and long reach short, standard, long and extra long. Universal 8-way design – versatile puller supports 8-way gripping.
BrandMaxPower #ad
ManufacturerMaxpower #ad
Part NumberMP-2JPHD-4

7. Mofeez


Pulley, and Flywheel 3pc Set, Mofeez 3" 4" 6" inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears

Mofeez #ad - Built to last: constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.

Various applications: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application. Damage-free removal: this mofeez 3" 4" 6" inch 3-jaw gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free. 3 or 6 position design: the universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.

Package contents: included is a 3-inch gear puller with a 4. 5-inch jaw spread and 1. 5-inch jaw reach, 4-inch gear puller with a 6. 25-inch jaw spread and 2. 5-inch jaw reach, and a 6-inch gear puller with a 8. 75-inch jaw spread and 4. 75-inch jaw reach.
BrandMofeez #ad
ManufacturerMofeez #ad
Weight5.86 Pounds
Part Number99MF18006

8. Yescom


Yescom 10 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine w/Case

Yescom #ad - Min/max reach: 0-6"0-160mm; min/max spread: 4"-10"100-250mm. Pump head can be turned by 360°for flexibility. 3 in 1 - integrates pumps, oil tube and drawing machine. Suitable for pulling hubs, flanges, gears, bearings and more. Max capacity: 10t; ares Travel: 2"50mm.
BrandYescom #ad
ManufacturerYescom #ad
Part Number25HGP002-10T-01

9. ABN


ABN 3in 2-Jaw Gear Puller – Removal Tool for Gears, and Flywheel, Pulley

ABN #ad - Perform maintenance with ease: remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool; Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles. Adjustable performance: whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.

Built to last: no need to worry about this hub puller tool falling apart when you need it most; Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress. Optimal reach: struggling to access tight, cramped spaces is a thing of the past; Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.

Perfect size: 2-jaw transmission gear puller measures 4. 5 inches 11. 4cm with jaw spread; Universal pulley puller has 1. 5-inch 3. 8cm jaw reach for your vehicle maintenance projects; Use any 14mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
BrandABN #ad
ManufacturerABN #ad
Height1.1 Inches
Length5.2 Inches
Weight0.84 Pounds
Width4.5 Inches
Part Number9626

10. HFS


HFS R 10 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil

HFS #ad - Wide use: this excellent wheel bearing hub removal tool has a wide range of applications, suitable for pulling out hub flanges, gears and bearings. Easy to use: this hydraulic puller is easy to carry and operate due to its portable structure.

Performance parameter: safety weight: 22046lbs 10 tons; effective wheelbase: 2. 4 inch60mm; maximum vertical distance: 6. 3inch160mm; maximum horizontal distance: 8inch200mm. This hydraulic gear puller has a maximum capacity of 22046lbs 10 tons, and a 2-inch 50 mm water wheel stroke can meet your work requirements. The pump head is very flexible and can rotate 360°.

3-in-1 design: this wheel bearing pull separator integrates pump, tubing and plotter. Small and light: the overall puller is small and light, packed in a blow mold suitcase, convenient for transportation or storage. Its forged steel double-shoulder bearings can pull two or three legs, and three jaws can be adjusted from high to low.
BrandHFS #ad
ManufacturerHFS #ad
Part NumberHGP-10TON