As an Amazon Associate I earn from qualifying purchases.

Take about 15 minutes to intstall total! fuel sending unit sae 5 hole mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. It could support fuel level Gauge and Water Level Gauge for Boat/Auto.


Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure. Cost-effective - has similar performance to part that originally came on vehicle, but is priced far below getting replacement from dealership.

Resolution range is 21mm. Length range: 225mm; 250mm ; 275mm. Install methods: the water level gauge sensor is standard SAE 5 hole pattern.
Easy to install and connect. Red-brown wire for positive and blue for negative. Order now and get hassle-free return and money back policy, 5 x M5 mounting screws, please contact us by email. The plastic fuel tank chooses this kit to be 1" smaller than the fuel tank depth, and the metal fuel tank chooses this kit to be 05" smaller than the fuel tank depth. Output signal is 240~33ohm.


We have multiple sizes for your choosing, 400MM, there is always one that can suit you and satisfy you. Easy to install: the water level gauge sensor is standard SAE 5 hole pattern, easy to install and hookup, connection blue wire to ground-, connect brown wire to instrument signal wire.
Your satisfaction is our great motivation, if you have any questions before purchase or after purchase, please feel free to contact us, we will give you a satisfied solution within 24 hours. High quality material: the fuel sending unit is made of high-quality 316 stainless steel material which is not easily damaged, anti-explosion funtion, durable and intends for long service life. It also has anti-vibration, keep you safe.

Correct for front or rear tank sending units. The package comes with a float and mounting bracket. Only fit 19 gallon midship fuel tank. Please make sure this unit suits your model before purchase.
Durable construction - this part is made from quality materials to ensure reliable performance and long service life. We always pay attention to the quality and after-sales service of the products. Save your money and time! Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure.

Br>. Br>. The size of float the diameter of float is 1. 38"35mm. B> if you have to drill the hole, Diameter 1. 50"38mm hole Would be Perfect. Easy to install the fuel level sending unit comes with Gasket, Mounting Screws, Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow.
The advantage of this fuel level sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. B>sae 5 hole mounting pattern, heavy duty 316 stainless steel and rugged Construction. B> 100tech guarantees with 1 year limited warranty & free lifetime technical support attention: To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.

Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
1. RUPSE
#ad
Rupse 2" 52mm Universal Car SUV Fuel Level Gauge Meter w/ Fuel Sensor E-1/2-F Pointer 12V
#adRUPSE #ad - Used to measure the fuel level of automobile. Inside diameter of the screen:43mm / 1. 7". High sensitivity and easy operation. Gauge is lighted. Voltage: dC 12V.More information #ad
Brand | RUPSE #ad |
Manufacturer | Rupse #ad |
Weight | 0.8 Pounds |
Part Number | 03CE30GMAU001 |
More information #ad
2. Geloo
#ad
240-33ohms 8" Marine Fuel Sending Unit Fuel Gas Tank Sender Boat Fuel Level Gauge Sensor Fuel Tank Sending Unit Fuel Water Level Sensor 200mm for Car Truck Boat Fuel Gauge Water Lever Gauge
#adGeloo #ad - The fuel level sensor comes with 1pc of Cork Gasket, 5pcs of Mounting Screws. Boat fuel gauge sensor length range: 200mm; 300mm ; 350mm; 450mm.Take about 15 minutes to intstall total! fuel sending unit sae 5 hole mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. It could support fuel level Gauge and Water Level Gauge for Boat/Auto.
More information #ad
Output signal: 0-190ohm or 230-33ohm Please choose one length range & signal you need when placing the order. Fuel gas tank lever sender wide application: for use in diesel, Water, Fuel, Gasoline, OEM Replacement. The fule/water level sensor with american standard output 240-33 ohms 240 ohms at empty, 33 ohms at full,Non-Linear Output.Brand | Geloo #ad |
Manufacturer | Hot car parts #ad |
Weight | 0.59 Pounds |
Part Number | Sensor_200mm-240-33ohm |
More information #ad
3. Geloo
#ad
12" 240-33ohm Fuel Sending Unit Fuel Tank Sender Fuel Water Level Sensor Marine Gas Water Tank Sensor Fuel Gauge Sending Unit 300mm for Car Boat Fuel & Water Level Gauge Fuel Tank Sending Unit
#adGeloo #ad - Mounting methods: Standard SAE 5 hole pattern. Output signal: 0-190ohm or 230-33ohm Please choose one length range & signal you need when placing the order.More information #ad
Level sensor support : Fuel Level Gauge and Water Level Gauge. Material: sus316 stainless steel. Length range: 200mm; 300mm ; 350mm; 450mm. Output signal: 240~33 ohm; Resolution range: 21mm.Brand | Geloo #ad |
Manufacturer | Hot car parts #ad |
Part Number | Sensor_860-00037-A300mm |
More information #ad
4. Dorman
#ad
Dorman 55818 Universal Fuel Level Sending Unit Kit
#adDorman #ad - Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure. Cost-effective - has similar performance to part that originally came on vehicle, but is priced far below getting replacement from dealership.
More information #ad
Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.Brand | Dorman #ad |
Manufacturer | Dorman - HELP #ad |
Height | 16.54 Inches |
Length | 2.76 Inches |
Weight | 0.1 Pounds |
Width | 2.85 Inches |
Part Number | 55818 |
Model | 55818 |
Warranty | Limited Lifetime Warranty |
More information #ad
5. EMIHO
#ad
240-33 ohms 10"250mm Fuel Level Sending Unit for Marine Boat Truck Car Fuel Water Level Gauge Sensor Stainless Steel Fuel Gas Tank Sender 5 Hole
#adEMIHO #ad - Material: the fuel level sending unit is made of heavy duty 316 stainless steel, anti-vibration, anti-explosion funtion, durable for long service life. Package include: 1x level sensor, buy with confidence! any questions about our product, 1x 2mm NBR gasket and wiring installation instructions.Resolution range is 21mm. Length range: 225mm; 250mm ; 275mm. Install methods: the water level gauge sensor is standard SAE 5 hole pattern.
More information #ad
Suitable for fuel, water tanks and any kinds of liquids without impurities and use for marine, cars and boats, truck, etc. Wide applications: the fuel level sensor supports fuel level gauge and water level gauge. Easy to install and connect. Red-brown wire for positive and blue for negative. Order now and get hassle-free return and money back policy, 5 x M5 mounting screws, please contact us by email. The plastic fuel tank chooses this kit to be 1" smaller than the fuel tank depth, and the metal fuel tank chooses this kit to be 05" smaller than the fuel tank depth. Output signal is 240~33ohm.
Brand | EMIHO #ad |
Manufacturer | EMIHOus #ad |
Part Number | S6CGQT12L |
More information #ad
6. Actron
#ad
Actron SP0F000013 Bosch Fuel Level Sender
#adActron #ad - Resistance specifications: empty - 240 ohms; 1/2 - 130 ohms; Full - 33 ohms. Includes gasket and mounting hardware. Fuel level sender. For use with bosch fuel level gauges and 5" - 26" deep tanks.More information #ad
Brand | Actron #ad |
Manufacturer | Bosch #ad |
Height | 2.3 Inches |
Length | 8 Inches |
Width | 5 Inches |
Part Number | SP0F000013 |
Model | SP0F000013 |
More information #ad
7. KAOLALI
#ad
KAOLALI Fuel Gas Sender Stainless Steel Fuel Sending Unit Marine Boat Water Level Gauge Sensor 5 Hole fit Fuel &Water Gauge 240~33ohm 400mm 15.75"
#adKAOLALI #ad - Wide application: the fuel level sender has a wide range of applications, water, kerosene, chemical tanks and any kinds of liquids without impurities and it is suitable for trucks, etc, buses and boats, it is suitable for fuel, and without limitation of environment.We have multiple sizes for your choosing, 400MM, there is always one that can suit you and satisfy you. Easy to install: the water level gauge sensor is standard SAE 5 hole pattern, easy to install and hookup, connection blue wire to ground-, connect brown wire to instrument signal wire.
More information #ad
Multiple sizes: the length range is 150mm, 300mm, 200mm, 250mm, 350mm, 450mm and 500mm. The signal output is 0-190ohm or 230-33ohm. Guaranterr: boat fuel sending unit only has one year factory warranty. Your satisfaction is our great motivation, if you have any questions before purchase or after purchase, please feel free to contact us, we will give you a satisfied solution within 24 hours. High quality material: the fuel sending unit is made of high-quality 316 stainless steel material which is not easily damaged, anti-explosion funtion, durable and intends for long service life. It also has anti-vibration, keep you safe.
Brand | KAOLALI #ad |
Manufacturer | ITYAGUY #ad |
Weight | 0.66 Pounds |
Part Number | 240-33ohm-400mm |
More information #ad
8. 3mirrors
#ad
3mirrors Fuel Level Sensor Fuel Pump Sending Unit Gas Gauge Tank Sender Direct Compatible with 1989-1998 Ford Mercury and Selected Models
#ad3mirrors #ad - Any questions, please feel free to contact us for help. Perfectly fix fuel tank gauge problem and a hassle-free job with no alterations. Have upgraded to box packaging to ensure the integrity of the products.Correct for front or rear tank sending units. The package comes with a float and mounting bracket. Only fit 19 gallon midship fuel tank. Please make sure this unit suits your model before purchase.
More information #ad
Thanks! Please feel free to choose 3mirrors. Thanks! direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. We always pay attention to the quality and after-sales service of the products. Save your money and time! Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure.
Brand | 3mirrors #ad |
Manufacturer | 3mirrors #ad |
Weight | 0.04 Pounds |
Part Number | A12048FD01 |
More information #ad
9. 100Tech
#ad
100TECH Marine Fuel Sending Unit Float Replacement 19"480mm for Boat Vehicle RV Fuel Sender Gas Tank Sending Unit Diesel Level Sending Unit Water Level Sensor Fuel Gauge Sending Unit 240-33 ohms
#ad100Tech #ad - B> wide application: it could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto. B>. B>100tech stainless steel fule tank sending unit is made with oki reed switchimported from japan. B> additionally, No Moving Parts to Break. No adjustment Needed for Tank.Br>. Br>. The size of float the diameter of float is 1. 38"35mm. B> if you have to drill the hole, Diameter 1. 50"38mm hole Would be Perfect. Easy to install the fuel level sending unit comes with Gasket, Mounting Screws, Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow.
More information #ad
If you need lengths other than 4"-24", Please Contact us Directly for More Information. Br>. It is the direct replacement for Arm Type sender. The fule/water level sensor with american standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. The advantage of this fuel level sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. B>sae 5 hole mounting pattern, heavy duty 316 stainless steel and rugged Construction. B> 100tech guarantees with 1 year limited warranty & free lifetime technical support attention: To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.
Brand | 100Tech #ad |
Manufacturer | 100TECH direct #ad |
Part Number | 19C5-BY480 |
More information #ad
10. Dorman
#ad
Dorman 692-241 Fuel Tank Sending Unit Compatible with Select Models
#adDorman #ad - Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
More information #ad
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure.Brand | Dorman #ad |
Manufacturer | Dorman - OE Solutions #ad |
Height | 5.8 Inches |
Length | 13.3 Inches |
Weight | 1.32 Pounds |
Width | 5.5 Inches |
Part Number | 692-241 |
Model | 692-241 |
Warranty | Limited Lifetime |
More information #ad