Top 10 Eye Bolt 1/2 x 8 – Trailer Axles

As an Amazon Associate I earn from qualifying purchases.

1. LIBRA

#ad

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Ubolt Kit

#ad
LIBRA #ad - 1/2"; 2 x tie plates for 1-3/4" leaf springs; 8 x 1/2"-20 hex nuts. It will replace sw4b / una212 / lib-401-de / 72-42 / 124903 / pr4b / 9150014 / 93184 different SKU# but same spring.

Include 3, 500lbs axle u-bolt kit for 2-3/8" dia round trailer axles, kit include: 4 x 5-1/2" long U bolts, U bolts dia.1, width of leaf: 1-3/4 inch, 500lbs trailer axle, 9/16 inch bushing dia, free open: 3 inch, for standard 3, 4 leaves, 750lbs capacity per each spring, eye to eye length: 25-1/4 inch, nylon bushings installed. Libra has been supplying us oem trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers.
BrandLIBRA #ad
ManufacturerLIBRA #ad
Part NumberSW4B

2. Made in U.S.A.

#ad

4 Stainless Steel Square U-Bolts Boat Trailer 1/2" D x 3 1/16" W x 4 5/16" L One Pack

#ad
Made in U.S.A. #ad - U-bolt size: 1/2" diam x 3- 1/16" inside width x 4- 5/16" Inside Height Length. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall.

These u-bolts are made in the USA. U-bolts and hardware are made out of 304 Stainless Steel. Do not use an impact or powered socket driver. Attention: when measuring for Your needed Height Length, add 1" for the nut and washer. These u-bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel. Let's keep it Fun, and Successful. Stop: only use a hand socket Ratchet or wrench to run the nuts up and tighten. Cpa. Threading: 1/2"-13 with a thread length of 2- 1/2".
BrandMade in U.S.A. #ad
ManufacturerMade in U.S.A. #ad
Part Number4SSU W/ NYLON INSERT LN

3. M-Parts

#ad

Trailer Hub 5 on 4.5 Trailer Hub 88-545KIT-1, 5 Bolt 5" x 4.5" Replacement Trailer Hub Kit for 3,5000-lb Trailer axles, M-Parts 3,500-lb Trailer Hub Kit

#ad
M-Parts #ad - Trailer hub kit - m-parts trailer idler Hub Kits 5 on 4. 5' for 3, 500 lbs Axle. Bolt pattern - 5 on 4. 5' bolt pattern idler hub with 1/2'-20 studs and bearing races installed.

Hardware - l-68149 inner bearing- 1-3/8 inch inside dimension / l-44649 outer bearing- 1-1/16 inch inside dimension, Grease seal - 2. 56 inch O. D - 1. 72 inch I. D/ ez lube dust cap - 1. 98 inch outside dimension, Lug nuts 1/2'-20/ Cotter Pin. Part number: 88-545KIT1. M-parts auto- m-parts auto specializes in trailer parts & accessories using the highest quality materials. Included - 5 on 4. 5 idler Hub and Hardware. Fit type: Universal.
BrandM-Parts #ad
ManufacturerMAT #ad
Part Number88-545KIT1

4. Tallew

#ad

Tallew 8 Pcs Battery Terminal Bolt Kit Replacement Battery Terminal T Bolt Battery Terminal Nuts Car Battery Cable Extender T Bolt Compatible with 64740 GM 19116852, VW 6x0-915-138, BMW 61128373946

#ad
Tallew #ad - Sturdy for long time use: made of quality stainless steel material, deform or rust, the t bolt is compact and stable in structure, with fine manufacturing process, to ensure reliable performance and long service life, not easy to break, providing you with a pleasant experience.

Enough to meet your needs: the package contains 8 pieces of battery terminal t bolt kit, including 8 pieces of bolts, 8 pieces of nuts and 8 pieces of washers, sufficient in quantity to meet your daily use and replacement demands. Easy to install: the battery terminal bolt is simple to install, you just need to install it manually at the target location, no tools or instructions are required, just takes a few seconds to install, saving you time and energy.

Range of applications: these car battery bolts are compatible with 64740 gm 19116852, VW 6X0-915-138 and BMW 61128373946; They are reliable replacements for an original part which is missing or has failed due to long time use. Ideal replacement parts: the battery terminal t bolt is an ideal replacement for original equipment, brand and model, matching the fit and function of most factory parts of specified year, you can use it with confidence.
BrandTallew #ad
ManufacturerTallew #ad
Part NumberTallew- Battery Terminal -097
ModelTallew- Battery Terminal -097

5. Tallew

#ad

196 Mil Car Sound Deadening Mat Automotive Sound Deadener Audio Noise Insulation and Dampening Heat Shield Insulation Mat with Rubber Roller for Car Hood Ceiling Door 15.7 x 9.8 in16 Pcs

#ad
Tallew #ad - Abundant quantity: there are a total of 15 pieces of car sound insulation sound deadening mats and 1 sound deadening roller, and the size of each mat is about 9. 8 x 15. 7 inches/ 25 x 40 cm, which can cover an area of 16. 15 sqft/ 1. 5square meter, the thickness is 196 mils/ 5 mm. Easy to use: 30 pieces of auto sound mats are precut, then roll with roller to ensure good adhesion, convenient to use with the roller provided; Just place the sound insulation pad to a suitable position, tear the adhesive protective film and fix the mat, simple and fast.

Reliable material: our auto sound deadening material is composed of closed foam sponge, and the back is equipped with strong adhesive backing, covered with mesh aluminum foil on the surface, firmly attached and not easy to fall off, you can store them for your vehicle or house use, oil resistant and high temperature resistant, waterproof, serving you well and long.

Broad scope of use: sound deadening pads are widely applicable for car roofs, body panels, trunk covers, trunks, and so on, hoods, under seats, wheel arches, interior and exterior partitions, chassis, firewalls, providing a tranquil space for you in life. Sound and heat insulation: high density closed cell foam has high density, dampening external noise, which can also effectively insulate sound, the sound deadener can effectively insulate heat, thus to create a comfortable driving environment for you, suitable for automobile heat insulation pad, bringing a fluent use experience.
BrandTallew #ad
ManufacturerTallew #ad
Height6.3 Inches
Length15.75 Inches
Width11.22 Inches
Part NumberTallew-Deadening -032
Model1

6. LIBRA

#ad

LIBRA 6000# 6K Single Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

#ad
LIBRA #ad - It will replace sw5 / una111 / pr5 / lib-502-de / 9150018 / 93163 different SKU# but same spring. Include complete single trailer axle hanger kit for 1-3/4" leaf springs, 4 x shackle straps eye to eye 3.

09", 2 x 2. 1" tall hangers, kit include: 2 x 3" tall hangers, 6 x 9/16"-18 x 3" long shackle bolts and locknuts. 3, 200-6, eye to eye length: 25-1/4", free open: 3", 000lbs trailer axle, for standard 5, width of leaf: 1-3/4", 5 leaves, 000lbs capacity per each spring, 9/16" bushing dia. Include 5, kit include: 4 x 7" long u bolts, 200-7, 000lbs axle u-bolt kit for 3" dia round trailer axle, U bolts dia.1/2"; 2 x tie plates for 1-3/4" or 2" leaf springs; 8 x 1/2"-20 hex nuts. Libra has been supplying us oem trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers.
BrandLIBRA #ad
ManufacturerLIBRA #ad
Part NumberSW5

7. Seven Sparta

#ad

Boat, Seven Sparta Tie Down Anchors for Truck, Trailer, Warehouse, Tie Down Rings(Black), 10 Pack of Heavy Duty Steel V Ring Bolts

#ad
Seven Sparta #ad - Seven sparta tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time. Add to your cart now! Wide range for use and great performance.

No-risk purchase! unconditional 30-day money-back guarantee. Painted with quality black protective coating to avoid rusting. The tie down anchors are heavy duty 1000 lb rings, trailer, boat to carry heavy loads, they are ideal to add tie down points for a truck, SUV, and let you far away from cargo's’ swing and noise. Our v-ring designed with one point mount, just thread bolt through the 13/32" diameter hole and mount the ring to a sturdy surface, all of the installations are completed.

Fully welded v ring bolts. There are quality coating painted on the tie down anchor to keep it far away from rusting, you should never worry about the rain or other matters to make the bolts rusted, they must keep in good condition to water. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. Single hole mount for easy installation.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part Numberss2019050801

8. LIBRA

#ad

LIBRA 3500lb Single Trailer Axle Suspension Kit Leaf Spring U-Bolt & Hanger Kit

#ad
LIBRA #ad - Include complete single trailer axle hanger kit for 1-3/4" leaf springs, kit include: 2 x 3" tall hangers, 4 x shackle straps eye to eye 3. 09", 2 x 2. 1" tall hangers, 6 x 9/16"-18 x 3" long shackle bolts and locknuts.

It will replace sw4b / pr4b / 9150014 / 124903 / 72-42 / una212 / lib-401-de / 93184 different SKU# but same spring. Include 3, 500lbs axle u-bolt kit for 2-3/8" dia round trailer axles, kit include: 4 x 5-1/2" long U bolts, U bolts dia.11, 500lbs trailer axle, width of leaf: 1-3/4 inch, 750lbs capacity per each spring, for standard 3, Free open: 3 inch, 9/16 inch bushing dia, eye to eye length: 25-1/4 inch, 4 leaves, nylon bushings installed. Libra has been supplying us oem trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers. 1/2"; 2 x tie plates for 1-3/4" leaf springs; 8 x 1/2"-20 hex nuts.
BrandLIBRA #ad
ManufacturerLIBRA #ad
Part NumberSW4B

9. Frienda

#ad

Pre Oil, 12.9 CL, Fully Threaded, 4 Pieces M8 8mm Secondary Clutch Spreader Belt Change Removal Tool for Can-am ATV's and SXS's Bolt M8 x 1.25 x 70

#ad
Frienda #ad - Size and material: made of iron, black surface plating to prevent rust and corrosion, durable and not easy to break or deform, the size is approx.

Type: 12. 9 cl, pre oil, fully threaded. Proper length: these 70 mm bolts are in the good length, open clutch completely but will not allow over thread in and over stress clutch springs. M8 x 1. 25 x 70 mm. Package includes: you will get 4 pieces bolts in the package, enough for you to use and for your bolt replacement. Fit for: apply to open the secondary clutch for Can-am ATV's and SXS's, will not work with the factory X3 spreader which use a larger bolt.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-Bolts Tool-01

10. DEEPSOUND

#ad

DEEPSOUND 8x for Acura RDX Turbo Variable Flow Actuator Eye Bolt & Nut VGT Rod End Link

#ad
DEEPSOUND #ad - If you have any questions, please email us first. Our service aim is to satisfy customers. Yield strength: 125, 000 psi. Hardness: rockwell c30 Hard, M6 x 1. 0 left hand thread. 100% performance and High Quality. Fitment: for 2007-2012 acura rdx k23a1 with 2300DO-VT. T engine.
BrandDEEPSOUND #ad
ManufacturerDEEPSOUND #ad
Weight1.1 Pounds
Part NumberDeepFBA-2000