Top 10 Exhaust Wrap Spray - Automotive Top Coats

Top 10 Exhaust Wrap Spray - Automotive Top Coats
As an Amazon Associate I earn from qualifying purchases.

1. Design Engineering

#ad

Black, Design Engineering 010301 High-Temperature Silicone Coating Spray

#ad
Design Engineering #ad - Works equally well on exhaust headers, engine blocks, pipes, and other applications where coatings are required. Protection from abrasions, hot oil spills, and road grime. Penetrates, seals, protects and prolongs the lifespan of exhaust wrap. Lasting protection for any hot surface up to 1500 degrees Fahrenheit. Recommended for use with DEI non-Titanium exhaust wraps.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height7.75 Inches
Length2.75 Inches
Weight0.3 Pounds
Width2.75 Inches
Part Number010301
Model010301

2. Design Engineering

#ad

Design Engineering 010330 Motorcycle Exhaust Pipe Wrap Kit with Hi-Temp Silicone Coating Spray, Black Wrap / Black Spray

#ad
Design Engineering #ad - A simple and effective way to control heat, protect against serious leg burns and improve performance. Improve exhaust flow for better performance and increase horsepower. Kit includes two rolls of 2" x 15 ft exhaust wrap, eight 8" stainless steel locking ties, 1 can of Hi-Temp silicone coating spray, and four 14" stainless steel locking ties. Withstands direct continuous heat up to 1200 degrees Fahrenheit. Prevents burns and protects against abrasions, hot oil spills, road grime and more.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height0 Inches
Length0 Inches
Weight2.5 Pounds
Width0 Inches
Part Number10330
Model10330
WarrantyNot applicbale

3. Design Engineering

#ad

Black Wrap/Black Spray, Design Engineering 010110 Exhaust/Header Wrap Kit with Hi-Temp Silicone Coating Spray

#ad
Design Engineering #ad - Reduces unwanted and harmful heat under the hood, and from entering the driver compartment. Kit includes two rolls of 2" x 50 ft exhaust wrap, 1 can of Hi-Temp silicone coating spray, eight 8" stainless steel locking ties, and four 14" stainless steel locking ties. Wrap header tubes to protect plug wires; wrap downpipes to improve velocity. Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more. Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior; wrap motocycle pipes to prevent leg burns.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height0 Inches
Length0 Inches
Weight5.3 Pounds
Width0 Inches
Part Number10110
Model10110
WarrantyNot applicbale

4. Design Engineering

#ad

Design Engineering 010108 Black 2" x 50' Exhaust Heat Wrap

#ad
Design Engineering #ad - Decreases exhaust density and increases exhaust flow. Only exhaust wrap with installation guide lines. Added durability and heat retention - withstands 1200 degrees F direct / 2000 degrees F radiant. Fit type: Universal Fit. Improves horsepower. Reduce under-hood temperatures a realistic 50%.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height2.25 Inches
Length11 Inches
Weight1.85 Pounds
Width8 Inches
Part Number10108
Model10108
WarrantyNot applicbale

5. Design Engineering

#ad

Design Engineering 010127 Titanium 2" x 50' Exhaust Heat Wrap with LR Technology

#ad
Design Engineering #ad - Fit type: Universal Fit. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Extremely pliable for a tight and secure wrap. Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat. Promotes increased flow for improved performance; reduces temperature & vibration breakdown. High resistance to abrasions, oil spills, temperatures and vibration breakdown.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height2.25 Inches
Length11 Inches
Weight0.9 Pounds
Width8 Inches
Part Number10127
Model10127
WarrantyNot applicbale

6. Design Engineering

#ad

Black Wrap/Black Spray Retail Packaging, Design Engineering 010094 Exhaust/Header Wrap Kit with Hi-Temp Silicone Coating Spray

#ad
Design Engineering #ad - Reduces unwanted and harmful heat under the hood, and from entering the driver compartment. Improves horsepower performance and can be used on everyday vehicles, street rods, motorcycles, and more. Kit includes two rolls of 2" x 50 ft. Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior; wrap motorcycle pipes to prevent leg burns. Wrap header tubes to protect plug wires; wrap downpipes to improve velocity. Exhaust wrap, 1 can of hi-temp silicone coating spray, eight 8" stainless steel locking ties, and four 14" stainless steel locking ties.
BrandDesign Engineering #ad
ManufacturerDesign Engineering, Inc. #ad
Height14.13 Inches
Length10.13 Inches
Width2.81 Inches
Part Number10094
Model10094
WarrantyDEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

7. Design Engineering

#ad

Clear, Design Engineering 010490 High-Temperature Spray Adhesive

#ad
Design Engineering #ad - Provides high strength adhesion. High heat resistant up to 160 degrees Fahrenheit 71 degrees Celsius. For use with different trims, foams, fabrics, and more; Ideal for adhering DEI Heat Screen and various Boom Mat materials. Dries quick and clear. Bonds to a wide variety of materials and forms a water-tight bond.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height96 Inches
Length36 Inches
Width36 Inches
Part Number10490
Model10490
WarrantyManufacturer warranty

8. Thermo-Tec

#ad

High-Temperature, Thermo-Tec 12001: Exhaust Wrap Coating, Black, 11 oz. Spray Can, Each 1

#ad
Thermo-Tec #ad - New thermo tec Thermotec Black Wrap Spray. Item only fits specific models listed. Manufacturer Part Number: 12001. The picture could be generic. Color: n/a | size: N/A. Message us with vIN/HULL for fast fitment verification.
BrandThermo-Tec #ad
ManufacturerThermo Tec #ad
Part Number12001

9. SunplusTrade

#ad

SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

#ad
SunplusTrade #ad - High resistance to abrasions, oil spills, temperatures and vibration breakdown. The thermal heat wrap can reduce heat under hood up to 50%. The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat. Universal fitment for cars and motorcycles performance parts. Package includes one 2 inch x 50 feet heat Wrap with pack of 6 12" Stainless Steel 304 Locking Zip Ties.
BrandSunplusTrade #ad
ManufacturerSunplusTrade #ad
Weight1.95 Pounds
Part Number1054-HEATWRPBLK

10. Thermo-Tec

#ad

Thermo-Tec 12002 Aluminum High Heat Wrap Coating, 11 oz.

#ad
Thermo-Tec #ad - Fit type: Vehicle Specific. This item is not for sale in Catalina Island. The coating will protect the wrap from abrasion and harmful liquid spills; extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction and seal the pores to minimize the penetration of harmful liquids. Seals the pores to minimize the penetration of harmful liquids. The coating also works excellent as a paint directly on metal surfaces.
BrandThermo-Tec #ad
ManufacturerThermo-Tec Products #ad
Height0 Inches
Length0 Inches
Weight0.98 Pounds
Width0 Inches
Part Number12002
Model12002
WarrantyContact manufacturer