Top 10 Exhaust Tips for Trucks - Automotive Replacement Exhaust Pipes

Top 10 Exhaust Tips for Trucks - Automotive Replacement Exhaust Pipes
As an Amazon Associate I earn from qualifying purchases.

1. A-KARCK

#ad

A-KARCK Exhaust Tip 3 Inch Inlet, Stainless Steel Rolled Edge, 3” Inlet 4” Outlet 12” Long Black Coated Finish Muffler Tip For Truck Tailpipe

#ad
A-KARCK #ad - Appearance:the pure and elegant black exterior can perfectly decorate your vehicle. Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Dimension: 3 inch inlet diameter, 4 inch outlet diameter, 12 inch overall length, Universal fits 3 inch outer diameter tailpipe.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height12 Inches
Length4 Inches
Width4 Inches
Part NumberNew304012RACBK

2. DC Sports

#ad

Polished Stainless Steel, Sedans, DC Sports EX-1013 Performance Bolt-On Resonated Muffler Slant Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars, and Trucks

#ad
DC Sports #ad - Inlet: 2. 875 inch, outlet: 3. 75 inch, Fits: 1. 75 inch - 2. 5 inch. Easy install, bolts on in minutes. Resonated to enhance sound. Easy install, bolts on in minutes. Polished silver finish.
BrandDC Sports #ad
ManufacturerPilot Automotive #ad
Height9 Inches
Length4 Inches
Weight1.6 Pounds
Width4 Inches
Part NumberEX-1013
ModelEX-1013

3. RBP

#ad

RBP RBP-303725-EXR Multi-Fit Truck Stainless Steel Slant Cut Resonated Exhaust Muffler Tip in Textured Black Finish with Stamped RBP Logo, Bolt-On to Fit Various Trucks Including Diesel Trucks

#ad
RBP #ad - Fits 2. 5”-3. 5” piping Diameter. Easy 3 bolt install, installs in minutes can be welded on for added security. Slant cut outlet for an aggressive look. Resonated to enhance sound. Crafted from t-304 stainless steel, coated with a heat-resistant textured black finish.
BrandRBP #ad
ManufacturerRBP #ad
Height5 Inches
Length12.5 Inches
Weight2.5 Pounds
Width5.25 Inches
Part NumberRBP-303725-EXR
ModelRBP-303725-EXR
Warranty1Y

4. LCGP

#ad

LCGP 3 Inch Inlet Black Exhaust tip,3" x 4" x 12" Clamp On Exhaust Tailpipe Tip for Truck

#ad
LCGP #ad - Black powder coated surface treatment, high temperature resistance, not easy to scratch & fall off. 3 inch inside diameter inlet, 4 inch outside diameter outlet, 12 inch overall length. Easy slip on 3" tailpipe. High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting. However, welding is recommended. There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust.
BrandLCGP #ad
ManufacturerLCGP #ad
Height4.5 Inches
Length13.7 Inches
Width4.5 Inches
Part Number304012RACK4

5. A-KARCK

#ad

2.5" Inlet 4" Outlet 12" Long Black Coated Finish Muffler Tip For Truck Tailpipe, Stainless Steel Rolled Edge, A-KARCK Exhaust Tip 2.5 Inch Inlet

#ad
A-KARCK #ad - Black coating prevents rain erosion. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation. 2. 5" id exhaust tip: 2. 5" inlet 4" outlet 12" overall length universal fits 2. 5" od tailpipe. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Appearance: the pure and elegant black exterior can perfectly decorate your vehicle.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height12 Inches
Length4 Inches
Width4 Inches
Part NumberNew254012RACBK

6. OsoTorero

#ad

3 Inlet Black Exhaust Tip, OsoTorero Universal 3" x 4" x 12" Replacement Exhaust Tips for Truck Car Bolt On Tailpipes 3 Inch Inlet 4" Outlet 12" Long

#ad
OsoTorero #ad - If you think it isn’t tight enough, additional welding will be a nice safeguard. Compatibilityuniversal for 3" outer diameter exhaust tip ; not For 3" Inside Diameter Tailpipe.

Perfect desighblack powder coated and rolled edge - 20 degree Slant Cut; A small hole on bottom of tip design to drain water, not easy to accumulate water and prevent rust. Premium materialdurable high quality black Powder Coated Stainless Steel With Strong Anti-corrosive, Prevent rust. Dimension3 inch inlet, 4 inch outlet, 12 inch overall length. Easy installationbolt on installation. Please measure the outside diameter of your exhaust pipe before ordering ! Thanks you.
BrandOsoTorero #ad
ManufacturerOsoTorero #ad
Part NumberWH01900BK03

7. AUTOSAVER88

#ad

4 x 6 x 15 Inches Universal Stainless Steel Diesel Exhaust Tailpipe Tip for Truck Cars, AUTOSAVER88 4 Inch Inlet Black Exhaust tip, Bolt/Clamp On Design

#ad
AUTOSAVER88 #ad - Note: please measure the outside diameter of your exhaust pipe prior to purchasing this exhaust tip. Made from stainless steel, coated with black paint, and is a nice decoration for your car exhaust. Protect your original exhaust pipe from sun and rain to avoid rusting and deformation. Bolt on installation design that allows fastening to your exhaust pipe by tightening screws. Standard 4" inside diameter inlet, 6” diameter outlet, 15" overall length, universal for vehicles with 4” outer diameter exhaust pipes.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Part NumberJ006
Model5841844472

8. DC Sports

#ad

Matte Black Powdercoat, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Universal Fitment on Most Cars, Sedans, and Trucks

#ad
DC Sports #ad - It helps to create a more aggressive sound while adding a sporty look to your vehicle. It has a straight-through design for top power output.

100 percent stainless steel with Flat Black Finish. Slanted Tip Shape. It has a 3-bolt clamp system for easy installation. Affordable performance: the exhaust tip is designed to boost the intensity of the exhaust notes. The exhaust tip is TIG-welded by hand. Fits 1. 5” to 2” diameter Piping. Design: the multiple point clamp-on exhaust is made using t304 stainless steel that resists corrosion. Resonated tips are to enhance sound output. Product dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long.
BrandDC Sports #ad
ManufacturerDC Sports #ad
Height2.25 Inches
Length9 Inches
Weight1.55 Pounds
Width3.75 Inches
Part NumberEX-1012B
ModelEX-1012B

9. Upower

#ad

Exhaust Tip 2.5" Inlet 2" x 6" Outlet 10" Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips Mirror Polished Weld-on

#ad
Upower #ad - Dimension2. 5 inch inlet; 2" x 6" inch outlet ; 10 inch Overall Length, and if the outlet diamater of your tailpipe is about 2. 5 inch, then this exhaust tip is what you need. Designweld on - rolled Edge - Angle Cut. Professional installation is highly recommended. Materialhigh quality stainless steel T304 mirror polished. Durable and anti-corrosive, protect the tips from Sun and Rain, avoid rusting and deformation. 1 year warrantyno instruction is included. Wide applicationfits 2. 5" inlet diameter car exhaust tail pipe.
BrandUpower #ad
ManufacturerPartssquare #ad
Height6.69 Inches
Length10.63 Inches
Width3.54 Inches
Part NumberGSFW-0514497418

10. MOSTPLUS

#ad

MOSTPLUS Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip 4" Inlet; 8" Outlet; 15" Length

#ad
MOSTPLUS #ad - Fitment: inside diameter inlet-4 Inch, Outside diameter outlet-8 Inch, Overall length-15 Inch. Material: high qualified stainless steel material, durable and anti-corrosive. Installation - no weld and drill needed. Just fix the screw to the appropriate location of tailpipe by wrench. Please check your car information before purchase. It will protect your original pipe from the sun and rain, avoid rusting and deformation. Note : it will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part NumberM31006