Top 10 Dual Exhaust Tip 4 inch Inlet - Automotive Replacement Exhaust Pipes

Top 10 Dual Exhaust Tip 4 inch Inlet - Automotive Replacement Exhaust Pipes
As an Amazon Associate I earn from qualifying purchases.

1. WESDON

#ad

Exhaust Tip 3.00" Inlet 5.00" Dual Outlet 18.00" Stainless Double Wall Rolled Exhaust Tip

#ad
WESDON #ad - Polished Stainless Steel. Weld on style fits a 3. 00 exhaust Pipe 3. 00 inlet. 11. 00 wide 5. 00 round Dual Outlet. 3. 00" inlet 5. 00" dual outlet 2000" long double Wall Round Edge. Polished to a mirror finish Please measure to make sure it fits your Car or Truck.
BrandWESDON #ad
ManufacturerWESDON #ad
Height5 Inches
Length20 Inches
Weight10 Pounds
Width12 Inches
Part NumberWDW5001875-300-RS-SS
ModelWDW5001875-300-RS-SS
WarrantyWesdon Industries LLC warrants OUR manufactured exhaust products to buyers of our products only against defects in craftsmanship and materials for one (1) year from the date of sale. All Performance mufflers carry a limited warranty. Expansion is guaranteed only to 1/4 inch over the original neck size. . Warranty does not apply to any manufactured products that have been subject to misapplication, abuse, misuse, normal wear, negligence, backfire damage, accidents, burnout due to poor carburetion, and rust out. This warranty does not cover any labor charged or any other claims incidental to replacing a defective part. Warranty is limited to the replacement of a defective product ONLY. A final decision as to whether a product is defective will be made by Wesdon Industries after an evaluation of the product. To obtain service under this warranty, call our customer service representative

2. Upower

#ad

Upower 2.5" to 3" Dual Exhaust Tip 2 1/2 Inch Inlet 3 Inch Outlet 9.5" Length Exhaust Tailpipe Tips 304 Polished Stainless Steel 1.2mm Thickness Double Wall Slant Rolled Edge

#ad
Upower #ad - For all tailpipes, the outlet size of your exhaust pipe is matched the inlet size of exhaust tip, then this exhaust tip can fit, if the outlet size is 2.

5inch, no matter of your Year/Make/Model. Pack of 1 dual exhaust tip; Weld On - Professional installation is highly recommended; No instruction included. Double wall slant - Angled Cut - Rolled Edge design. There is 1 year warranty for each purchase. Before you buy, please make sure the Brand Logo "Upower". Please measure your exhaust pipe outlet size, it can fit 2. 5 inch of your exhaust pipe outlet size. Materials: made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
BrandUpower #ad
ManufacturerPartssquare #ad
Weight1.01 Pounds
Part Number179875

3. MMI Motorsports

#ad

MMI Stainless Steel Exhaust Tips 2.50” Inlet & 4.00” Dual Outlet PAIR TIP WELD ON 2.5in 4in Universal SS SILVER POLISHED BEAUTIFUL QUALITY

#ad
MMI Motorsports #ad - Eautiful rainbow TIG welds around each tip. Fully mirror polished T-304 stainless steel tips. Slanted outlets to flow with bumper. 2. 50” inlets with dual 4. 00” outlets inlets are oversized for easy weldING AND ADJUSTING. Each tip has double walls with dual outlets. Both left and right side.
BrandMMI Motorsports #ad
ManufacturerMMI #ad
Part Number00SSTIP250400

4. WESDON

#ad

Exhaust Tip 3.00" Inlet 4.00" Outlet 16.00" long Dual Slant Angle Stainless Steel WDWD304016-300-SS Wesdon Exhaust Tip

#ad
WESDON #ad - Exhaust tip 3. 00" inlet 4. 00" outlet 16. 00" long Dual Slant. Weld on style fits a 3. 00 exhaust Pipe 3. 00 inlet. Polished Stainless Steel. Double wall slant Could be used as Left or Right Side. Please measure to make sure it fits your Car or Truck fits a 3. 00 exhaust Pipe 3. 00 inlet.
BrandWESDON #ad
ManufacturerWesdon #ad
Height8 Inches
Length16 Inches
Width4 Inches
Part NumberWDWD304016-300-SS
WarrantyWesdon Industries LLC warrants OUR manufactured exhaust products to buyers of our products only against defects in craftsmanship and materials for one (1) year from the date of sale. All Performance mufflers carry a limited warranty. Expansion is guaranteed only to 1/4 inch over the original neck size. . Warranty does not apply to any manufactured products that have been subject to misapplication, abuse, misuse, normal wear, negligence, backfire damage, accidents, burnout due to poor carburetion, and rust out. This warranty does not cover any labor charged or any other claims incidental to replacing a defective part. Warranty is limited to the replacement of a defective product ONLY. A final decision as to whether a product is defective will be made by Wesdon Industries after an evaluation of the product. To obtain service under this warranty, call our customer service representative

5. UPOWER

#ad

Upower 2PCS 2.5" Inlet 4" Outlet Diesel Exhaust Tip 2.5" to 4" Exhaust Tailpipe 5" Long Double Wall Stainless Steel Weld-On Round Slant Tailpipe Tips 2.5" x 4" x 5

#ad
UPOWER #ad - Designweld on - double Wall - Slant Angle Cut. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. Materialhigh quality stainless steel mirror polished.

3, make sure to choose a tip that's long enough to vent the exhaust from under your vehicle, The inlet size of exhaust tip must match the diameter of your existing tailpipe for a proper fit. 2, many automobiles have bumper and cowling cut-outs for factory exhaust tips, but short enough to keep it looking cool. 1 year warrantyno instruction is included. Dimension2. 5 inch inlet diameter;4 inch outlet diameter;5 inch Overall Length. How to choose1, be sure the outlet size of the new tip will clear these cut-outs to avoid any damage or having to trim your body panels. So be sure to measure the tailpipe. Professional installation is highly recommended.
BrandUPOWER #ad
ManufacturerPartssquare #ad
Part Number193701

6. MMI Motorsports

#ad

MMI Stainless Steel Exhaust Tips 2.25” Inlet & 3.50” Dual Outlet PAIR TIP WELD ON 3in 4in Universal SS SILVER POLISHED BEAUTIFUL QUALITY

#ad
MMI Motorsports #ad - 2. 25” inlets with dual 3. 50” outlets. Both left and right side. Slanted outlets to flow with bumper. Eautiful rainbow TIG welds around each tip. Each tip has double walls with dual outlets. Fully mirror polished T-304 stainless steel tips.
BrandMMI Motorsports #ad
ManufacturerMMI #ad
Height50 Centimeters
Length100 Centimeters
Weight7 Pounds
Width100 Centimeters
Part Number00SSTIP225350

7. WFLNHB

#ad

WFLNHB Dual Exhaust Tip 3 inch Inlet 4 inch Outlet Stainless Steel 16 inch Long Slant Angle Double Wall

#ad
WFLNHB #ad - Weld-on style, universal fits 3 inch inlet exhaust pipe. Package include: 1 x Dual exhaust tip as the pictures show. Made of stainless steel with polished finish. 3 inch inlet, 4 inch outlet, 16 inch long. Please check the size carefully to ensure proper fitment before purchase.
BrandWFLNHB #ad
ManufacturerWFLNHB #ad
Height6.1 Inches
Length17.32 Inches
Weight4.98 Pounds
Width12.01 Inches
Part Number1-8158548-849282
ModelDoes not apply

8. SORMOR

#ad

Inlet 63mm2.5inches Outlet 89mm3.5inches, Sormor Dual-Outlet Y-Style Matte Carbon Fiber Muffler Pipes Exhaust Tips with Blue Burnt Stainless Steel

#ad
SORMOR #ad - 1. Material: sus 304 stainless steel and high quality carbon fiber, rustproof, corrosion resistance, light weight and durable.2. Dimension:inlet:63mm2. 5", outlet:89mm3. 5", total length:250mm 9. 8". 3. Dual-outlet y-style, Angle cut, equal length type, Clamps on. No weld and drill needed. 4. Installation: easy clamps on installation. Just fix the screw to the appropriate location of tailpipe by Wrench. 5. Application: fits for 2. 4" outlet universal car original exhaust tail pipe.
BrandSORMOR #ad
ManufacturerYICHEN #ad
Part NumberYSMB6389N

9. TUNERBITS

#ad

Dual 4" Quad Style Stainless Steel Exhaust Tips for Acura TL 2004-2014

#ad
TUNERBITS #ad - Double walled Tips for a high end look. Mirror polished T304 Stainless Steel Construction. Can be welded or clamped on. Uniform outlet.
BrandTUNERBITS #ad
ManufacturerTUNERBITS #ad
Part NumberMT-DUAL-2540-C-ATL04

10. A-KARCK

#ad

A-KARCK Exhaust Tip 4" Inlet, Polished Bolt On 4" Inlet 5" Outlet 12" Long Stainless Steel Muffler Tip Protect Tailpipe

#ad
A-KARCK #ad - Material: made of premium-grade stainless steel with strong anti-corrosive. Appearance: repeatedly polished surfaces are less prone to soiling.

4" id exhaust tip: 4" inlet 5" outlet 12" overall length exhaust tip universal fits 4" outer diameter tailpipe. Bolt on installation: bolt on design for fast and easy installation, eliminates the need for cutting, welding, and other modifications. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Long lasting in all weather conditions. The pure and elegant silver exterior can perfectly decorate your vehicle.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height12 Inches
Length4 Inches
Width5 Inches
Part NumberNew405012RACB-01