Top 10 Drc Edge 2 Tail Light Xt250 - Automotive Parking Bulbs

Top 10 Drc Edge 2 Tail Light Xt250 - Automotive Parking Bulbs
As an Amazon Associate I earn from qualifying purchases.

1. iBrightstar

#ad

IBrightstar Newest 9-30V Super Bright Low Power 3157 4157 3057 3156 LED Bulbs with Projector Replacement for Back Up Reverse Lights and Tail Brake Parking Lights, Xenon White

#ad
iBrightstar #ad - Advantage: non-polarity design, full aluminum housing with projection lens for maximum Light output and better heat distribution, Compatible for both CK/SRCK and Standard socket. Any other problem please feel free to contact us, we are always here to satisfy of you.

Please double check owners manual or original bulb number to confirm before placing an order. More than 300% brighter than original halogen bulb, built in Constant Current IC for Longer life span & Low Power Consumption. Application: back up reverse lights, brake lights, side marker lights, Parking Lights, Tail Lights, Daytime Running Lights etc. Set of 2 bulbs 54smd 3014 & 3smd 3030 high brightness chips per bulb, Working Voltage: 9v-30v fit 12V, 24V vehicles. Fits: 3056, 3757a, 3155ll, 3156na, 3357all, 3156ak, 3057all, 3357a, 3057st, 3057a, 3157nak, 3157nall, 4157nak, 3156, 3457, 3157, 3156nak, 4057ll, 3357k, 3356, 3157a, 3457all, 3047k, 3357, 3157ak, 3157st, 3757all, 3457ak, 4157k, 3157x, 3057x, 3357ll, 4157ll, 3057k, 3357kna, 4157na, 3457na, 4114k, 3057, 3157kx, 4114ll, 3157ll, 4057, 3057kx, 3457a, 3757ak, 3457k, 3156k, 3157na, 3057ll, 4157, 3156a, 3057klcp, 3157k, 3047, 3454na, 3047ll, 3457nak, 3155, 4057k, 4114, 5702 ect.

You will need load resistor or flash relay to prevent the hyper flash when replacement for Turn Signal Lights.
BrandiBrightstar #ad
ManufactureriBrightstar #ad
Height0.67 Inches
Length1.82 Inches
Weight0.03 Pounds
Width0.88 Inches
Part NumberiBrightstar-3157-3014/3030-54/3W
Model3157-3014/3030-54/3W

2. Nilight

#ad

2 Years Warranty, Nilight, TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep

#ad
Nilight #ad - Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light.

Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 75”. Upgraded unique design: neligh's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it. Shake proof, there will be no worries of loosing light or wires. Awesome brightness: each tail light has 10pcs high-quality SMD LEDs to output super bright red light, high brightness for Turn/Brake light, low brightness for Tail light, improving visibility and ensuring you a safer night.6

6” x2. Hole size for surface mount is: 6. 5” x 1. Universal application: work on 12v dc system, horse trailer, trailers, semi-trailer, special vehicle, tractors, tail light for all kinds of trucks, function as turn/Brake light, dump Truck, travel trailer, etc. Just make sure the hole size before your purchase. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberTL-01
ModelTL-01
Warranty2 Years Warranty

3. Dr. Wolfe's Energetic Healthcare

#ad

Edge Tail Light Smoke

#ad
Dr. Wolfe's Energetic Healthcare #ad - Reduces electric power consumption. Offers a longer operating life. Detachable lens. Plug type terminals are included for installation. Waterproofed circuit.
BrandDr. Wolfe's Energetic Healthcare #ad
ManufacturerDRC #ad
Part NumberD45-29-348
ModelD45-29-348

4. Nilight

#ad

Nilight, TL-10 2PCS 16” 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

#ad
Nilight #ad - Light bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.

Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse. Multi-functions each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.

Package include 2pcS trailer marker ID bar with 2 hardware pack. Easy wire connection for wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light. Wide application can be perfectly used on most 12v heavy duty trucks, boat trailers, RV camper work vehicles, semi trailers, horse trailers, cargo trailers, travel trailers, etc.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberTL-10
ModelTL-10
Warranty2 Years Warranty

5. iBrightstar

#ad

Brake Stop Tail Running License Plate LED Light Lamp for 12V Camper Truck RV Boat Snowmobile Marine Under 80", iBrightstar IP68 Waterproof Square Trailer Lights kit, DOT Compliant

#ad
iBrightstar #ad - Easy to install the submersible trailer lights. Super bright LED lights provide maximum visibility and safety. 18 gauge pure copper wires ensure trailer lights LED do good job underwater. Application: universal for trucks, boat, trailers under 80", tractors, camper, special vehicle etc.

Please make sure connect wiring and no electronic short before marine/underwater. Fully operable in inclement weather, semi-trailer, bus, Dump Truck, these heavy duty trailer lights are tough and durable for the long term. Wiring diagram ships with trailer lights, you can also find it on detail page. The trailer led lights are suitable for under 80 Inch width towing vehicle, like boat, trailer, truck, snowmobile etc. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens.

Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you. 2 optional mounting ways, you can mount on the back or the side of the trailer. Sonic welding whole Sealing Technology ensures sealing solidity of the LED tail lights. Left and right led trailer tail lights have 6 functions in common: stop/turn/Tail/Rear reflector/side reflector/side marker light. Excellent waterproof/submersible lights for trailer.
BrandiBrightstar #ad
ManufactureriBrightstar #ad
Part Number38
Model8542089223

6. evomosa

#ad

Evomosa Motorcycle Taillight Universal Brake Stop Light ATV Tail Light

#ad
evomosa #ad - P>high-quality abs plastic and cash ultrasonic welding technology, waterproof and shockproof, light weight, durable, can be used under any conditions.

P>. P>this led can be hooked up for both tail lights and brake lights LED light fits for Harley and so on. P>. P>easy installation, simple wiring, no need for professional installation, let you experience the fun of installation. P>. P>this 12v motorcycle taillight, looks very clear, when the brakes are high and bright LED lights, saving power and low energy consumption. P>. P>color: smoke/white/red, 23 led red as running & brake light, 5 white LED as license plate light. Lens. P>.
Brandevomosa #ad
ManufacturerEvomosa #ad
Height3.5 Centimeters
Length12 Centimeters
Weight0.15 Pounds
Width3 Centimeters
Part NumberMT77
Model8542089133

7. GLL

#ad

Stradard 1157 LED Bulbs Socket Holder Auto Car Plastic Waterproof Turn Signal Tail Stop Rear Brake Light Base Harness Plugs Connectors Pre-wired Wiring Sockets

#ad
GLL #ad - Great replacement part for your car to keep 1157BAY15D LED Light bulb well, steady and firm. We will solve it within 24 hours. Materials: plastic and Electronic Parts Waterproof. Standard 1157bay15d base harness Plugs Connectors Pre-wired Wiring Sockets Holder. Socket type: 1157bay15d if you have any problem receiving the goods, please contact us in time. Size: 15 x 3. 5cm / 5. 9" x 1. 4"l*d; wire length: 11cm/4. 3 inches;net Weight : 20g.
BrandGLL #ad
ManufacturerGLL #ad
Part Number2P-AT0042GZ-1157
Model2P-AT0042GZ-1157

8. NTHREEAUTO

#ad

NTHREEAUTO LED Motorcycle Tail Light Integrated Brake Turn Signals License Plate Lights Universal Rear Taillight Compatible with Honda Kawasaki Yamaha Suzuki Bobber Cruiser Chopper Cafe Racer

#ad
NTHREEAUTO #ad - You are backed by 3-Month warranty since the order purchase date. Buy with confidenceyou will get 1x motorcycle rear brake light. Easy wiring, no faded after long time exposure, protect bulbs from water and dirt damage, Black - Ground, shockproof and waterproof, no water or moisture inside after underwater testing, anti-scratch, Yellow - Turn Signal, Red Wire - Brake Light.

Solutions will be offered regardless of the warranty period. Brighter than factory lightuniversal motorcycle taillight built in 40 PCS LEDs, reducing damage caused by burning, foggy and rainy days or any extreme weather, low power consumption, better heat emission, energy saving, extending the range of light, greatly increased your rear end visibility at night, make your driving safer. Please feel free to contact us if you have any questions. Led twin dual brake tail lightunique double rear lights designs, nice and attractive, add features to your motorcycle.

Waterproof & durablemade of abs plastic smoked lens and metal bracket, blue - running light, durability. Note: minor modification may be required for some models! Compatibilityrear tail light fits most 12v motorbikes, yamaha r1 R6 V Star Road Star, street Bike, Honda Shadow CBR, BMW, chopper, kawasaki vulcan ninja zx6r zx10r, suzuki boulevard gsxr, Dirt Bike.4-in-1 multifunctional, stylish and classic, meet your requirements for all functions. Outside ring lights up red for brake/running light, inside ring lights up amber for turn signal, the bottom LED lights up white for license light.
BrandNTHREEAUTO #ad
ManufacturerNTHREEAUTO #ad
Part NumberFBAN3MP24973

9. Partsam

#ad

Partsam 2PCS Red 12LED Truck Trailer Stop Turn Tail Brake Lights 8"x2.5" Surface Mount 2 Function

#ad
Partsam #ad - Super bright red 12 leds, super long life span up to 100, 000 hours. Wire connection tips: white wire is the Ground; Red Wire is the high brightness; Black Wire is the low brightness. 12 diodes design great for RV and Cargo Trailer lighting. Partsam 8"x2. 5" surface mount sealed 12 led red Stop Turn Tail Light, features as Stop Brake and Indicator Tail functions. Dot approved; rate for 12V, test to 13. 8v.
BrandPartsam #ad
ManufacturerPartsam #ad
Part Number162040
Model2698882058

10. CICMOD

#ad

CICMOD Rear Fender Mount Red LED Tail Light Brake Lamp Turn Signals License Plate Light for Custom Off-Road Motorcycle Dirt Bike

#ad
CICMOD #ad - Package included: 1pcs Motorcycle LED Rear Fender Tail Light. 5 wires set up: black wire: negativeground; blue wire: running Light/Tail Light; Red Wire: Brake Light; 2 x Yellow Wires: Turn Signal Light. Feature: waterproof electronic board fitted with a stabilized circuit and designed to dampen sudden voltage jumps. Minor modifications may be needed. Fitment: universal rear fender tail light fits for 12-15V off-road motorcycle, dirt Bike, custom bikes. Function: brake lightred color, Turn signal lightamber color, Running lightred color.
BrandCICMOD #ad
ManufacturerCICMOD #ad
Part Number999112
Model8542089176