As an Amazon Associate I earn from qualifying purchases.

1. Traxion

#ad

Traxion 1-100 ProGear Wide Body Low Profile Automotive Creeper W/All-Terrain 5" Casters

#adTraxion #ad - Weight capacity: 400 lbs. Low profile design provides users with additional working room while underneath a vehicle. Wide body drop deck does not have any pinch points. Wide contoured deck adds extra comfort and stability when in-use. Huge 5" casters made of hard TPR Synthetic Rubber for a best in class mobility.

Brand	Traxion #ad
Manufacturer	Traxion #ad
Height	23 Inches
Length	43 Inches
Weight	0.11 Pounds
Width	7 Inches
Part Number	1-100
Model	1-100

2. Pro-LifT

#ad

Blow Molded Ergonomic HDPE Body with Padded Headrest & Dual Tool Trays, 350 Lbs Capacity Red, Pro Lift Mechanic Plastic Creeper 40 Inch

#adPro-LifT #ad - Warranty - pro lift plastic creeper is covered one year limited warranty from the date of purchase. With its impact resistant, or transport. Due to a defect in material or workmanship under normal usage, we will repair or replace at its option.

Sit slowly on the end of the creeper, and lay back to rest your head on the padded headrest to give you the extra relief. It fits confortably for most users. Swivel casters - this plastic creeper features 6 multi-terrain swivel casters, chemical, and grease resistant. In addition, two molded-in tool trays offer ease of working while laying down. Ergonomics design - rugged ergonomics design with the impact resistant to provide extra comfort for users. It is light weight approximately 13 lbs, position, it gives an users extra comfort while laying on it.

The carry handle makes it easy to pick up, but strong. 350 lbs capacity - c-6040 creeper features 350 lbs capacity with the length of 40 inches and the width of 19 inches. With the caster size of 3 inches, which are industrial strength with oil, it provides not only the maneuverability but also the extra durability. Lighweight - pro lift plastic creeper is one piece blow moded creeper that made out of HDPE plastic.

Brand	Pro-LifT #ad
Manufacturer	Pro-Lift #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	C-6040
Model	C-6040

3. OxGord

#ad

Mechanic Creeper Car Shop Creepers, Garage Automotive Accessories Best for Auto Floor Low Profile 40" Crawler Roller Mechanics Tools & Equipment Foldable Scooter Board Flat Mat Stool Chair Seat Cart

#adOxGord #ad - Comfort: unlike other products, your back won't need repair after fixing your vehicle on this durable padded creeper. Dimensions: extended 40" l x 16. 75" w x 4" h - foldable 19.

75" l x 16. 5" w x 5" H. Fully assembled: no need to mess around with missing parts or putting this together like other products as it's ready to go right out of the box and includes a one 1 year limited warranty. Practical: this easy to carry mechanic shop creeper folds in half for easy clutter free storage keeping your work area neat and helping you avoid accidents. Keep on rolling: 6 rotating swivel caster wheels and heavy duty metal frame will keep you mobilized when working on your special vehicle in the garage, warehouse, auto body shop or where you need it most.

Brand	OxGord #ad
Manufacturer	OxGord #ad
Height	8 Inches
Length	19.75 Inches
Width	16.5 Inches
Part Number	OX-MC-001-RD
Model	OX-MC-001-RD

4. ATD Tools

#ad

ATD Tools 81046 Low Profile Creeper, 400 lbs. Capacity

#adATD Tools #ad - 1/2 inch ground clearance. 400 pounds capacity. 2 inch minimum height. 3 inch polyurethane wheels allow for smooth movement around the shop floor.

Brand	ATD Tools #ad
Manufacturer	ATD Tools #ad
Height	2 Inches
Length	40 Inches
Weight	28 Pounds
Width	26.75 Inches
Part Number	81046
Model	81046

5. Garage Kingdom

#ad

1 Pack, Garage Kingdom 20290 Low Profile Mechanic's Creeper

#adGarage Kingdom #ad - 5" jumbo swivel rubber casters allow for use even on cracked and uneven floors. Frame dimensions: 48" L x 28" w x 7" H. Deck dimensions: 40" l x 14" w x 5. 5" h. Capacity: 400 lbs.

Brand	Garage Kingdom #ad
Manufacturer	Garage Kingdom #ad
Weight	21 Pounds
Part Number	20290
Model	20290

6. WORKPRO

#ad

Smooth Maneuverability, 36-Inch with 6 Wheels – Heavy-Duty Construction, Easy to Clean W111001, Plastic Mechanic Creeper with One-Piece Design and Padded Headrest, WORKPRO Low-Profile Car Creeper

#adWORKPRO #ad - Plus, the contour design has two tool holding bins built into the sides. Padded headrest – the padded headrest and body-fitting design allows for optimum comfort while this automotive creeper is in use.

Smooth maneuverability – this plastic car creeper has six ball-bearing nylon castors for the smoothest maneuverability to help you get the job done efficiently. Easy to clean – the plastic body is oil and solvent resistant. It’s easy to clean so you can start fresh with each job. One piece design – to do the best possible job time and time, this low-profile creeper has a heavy-duty one-piece design that provides maximum durability and performance. Mechanics creeper – whether you’re a mechanic or a diyer, you can use this WORKPRO heavy-duty plastic creeper to gain access to the underside of a vehicle to perform maintenance or inspection.

Brand	WORKPRO #ad
Manufacturer	Prime-Line #ad
Part Number	W111001
Model	W111001
Warranty	1-Year Manufacturer

7. Pro-LifT

#ad

Pro-Lift C-2036D Grey 36" Z-Creeper Seat

#adPro-LifT #ad - Vinyl padded seat and headrest. 300 pounds weight capacity. 6 swivel casters for easy maneuverability. Easily converted from creeper to seat for your maintenance convenience. Easily retractable pin to change seat. Thick padded cushions create a comfortable base for easy access and movement during your maintenance tasks.

Brand	Pro-LifT #ad
Manufacturer	Pro-Lift #ad
Height	4.5 Inches
Length	21.85 Inches
Weight	15 Pounds
Width	17.32 Inches
Part Number	C-2036D
Model	C-2036D
Warranty	Ninety (90) Day Limited Warranty

8. SATA

#ad

ST95441, SATA 40" Creeper with Magnet Trays

#adSATA #ad - Made in Taiwan. Package dimensions: 41. 14" l x 204" w x 3. 54" h. Custom-molded composite frame provides lasting durability. Storage options Magnetic Trays For Convenient Storage.

Brand	SATA #ad
Manufacturer	Apex Tool Group #ad
Height	5.75 Inches
Length	40.75 Inches
Width	20.5 Inches
Part Number	ST95441
Model	ST95441
Warranty	No Warranty

9. Lisle

#ad

Lisle 97102 Black Plastic Creeper

#adLisle #ad - Padded headrest keeps you in a working position and is easily replaceable. Durable – special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The handles located on 3 sides make it easy to hang, carry or move.

Comfortable – ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Easy to clean – surface is resistant to solvents, greases and fuels. Capacity – our plastic creepers feature 300 lbs. Low profile – unique design provides 7/8 inch floor clearance to clear air hoses, cords, and other obstructions. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 11.

5 lbs. Capacity with a total length of 38 inches, width of 17. 5 inches and height of 4 inches. Pop-in rollers – six 2 inch ball bearing swivel rollers pop in and out for easy replacement. 300 lbs. Urethane wheels are corrosion resistant and are inserted into metal bushings which are firmly molded into the creeper body.

Brand	Lisle #ad
Manufacturer	Lisle #ad
Height	5 Inches
Length	39 Inches
Weight	0.1 Pounds
Width	18 Inches
Part Number	97102
Model	97102
Warranty	Lifetime on Body - No Warranty of Wheels

10. JEGS

#ad

JEGS Creeper and Air Seat | Black with JEGS Logo | 350 LBS Creeper Capacity | 250 LBS Seat Capacity | Memory Foam Padding | Adjustable Height Air Seat

#adJEGS #ad - Tool storage under the air seat to keep your tools easily accessible. Black finish with jegs logo for good looks and long life. Reach under your vehicle with a low 1. 75” creeper ground clearance. Glide and slide in comfort with the memory foam padding and smooth-rolling casters. Adjustable 3-position headrest on the creeper for maximum comfort.

Brand	JEGS #ad
Manufacturer	JEGS #ad
Height	6 Inches
Length	56 Inches
Weight	30 Pounds
Width	18 Inches
Part Number	81160