As an Amazon Associate I earn from qualifying purchases.
EVIL ENERGY #ad - Professional installation is highly recommended. Od: 0543inch. Length: 20 feet6m. Max working pressure: 2500psi. Bursting pressure: 8000psi. Ptfe hose relatively hard, it can't be bend and folding in half.
EVIL ENERGY #ad - Od: 0543inch. Length: 16 feet. Max working pressure: 2500psi. 8 ptfe nylon braided fuel line relatively hard, it can't be bend and folding in half.
Bursting pressure: 8000psi. An8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications. Any problem you might have, please feel free to contact us via Amazon message. Evil energy provide 8an ptfe fuel hose fitting kit 3-month warranty.
EVIL ENERGY #ad - Applicable medium: all automotive fuels, lubricants, and coolants. Ptfe hose relatively hard, it can't be bend and folding in half. Id: 13/32". Ptfe nylon braided fuel lines are ideal for high temperature and high pressure applications.
muge racing #ad - Maximum working Pressure psi: 3000 psi. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Professional installation is highly recommended. Can't bend - ptfe hose relatively hard, it can't be bend and folding in half. Work condition - maximized resistance to heat, corrosion and abrasion.
Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Tips - professional installation is highly recommended. Please do not install it in a corrosive environment, which will affect the service life of braided fuel Line Hose. Bursting pressure psi: 10000psi.
A gift for cut hose -there is a free duct tape for you, make you easily cut hose without destroying the steel braided, before you cut the hose, you just need to wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut!.
MOOSUN #ad - Compatible withmostly worked with coolant, fuel return system, diesel, oil, pump, hydraulic fluid, fuel, alcohol and air. Outer nylon braided has excellent inflaming and safer to use. You will getthe 8an nylon braided fuel line kit includes: 1/2 braided fuel line length:20ft/6M and 10pcs 8an swivel hose ends 4pcs straight, 2pcs 90degree, 2pcs 45degree, 2pcs 180degree Inner Diameter: 11.
12mm044inch - outer Diameter: 17. 2mm068inch. Maximum working Pressure psi: 1000 psi. 1/2 braided nylon cpe fuel line can be used for a long time at -40℃ to 100℃ oil temperature.
Bursting pressure psi: 5000psi. Hose end fittings featuresdesigned for smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. 8an nylon braided hose can be used in brake system, oil return, pump gas, turbo cooler system and transmission system. Not fit e85. Not recommended installation in corrosive environment, 8an braided fuel line's service life will be influenced.
SINTLY #ad - Black nylon braided ptfe fuel hose maximum working pressure psi: 2500 psi. Bursting Pressurepsi: 8000psi. Nylon braided ptfe fuel line mostly worked with transmission fluid, fuel supply line, coolant fluid hose, diesel and fuel.
Tips:please measure before purchase, make sure the pressure and temperature range is suitable for your application!Professional installation is highly recommended. Ptfe nylon braided fuel line for excellent flexibility and resistance to abrasion.
Hose id: 13/32". Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Outer nylon braided has excellent inflaming and safer to use. Warranty: sintly offers 3-month warranty for the braided fuel line. 8an fuel line suitable for transmission oil cooler line, pump gas, fuel return line, carburetor fuel hose, turbo cooler line, hydraulic fluid, oil, coolant, oil feed line, vacuum, ls swap fuel line. Hose od: 0543inch.
SecosAutoparts #ad - Please read the product description carefully before buying to ensure that the product is suitable for your device. Application: fuel, coolant and air for automobiles or marine engines, ethanol, alcohol, lube, most suitable for racing cars & motor racing bikes.
This braided black nylon fuel hose are specially designed to work in any automotive project. This hose provides you with unsurpassed levels of performance and reliability for your tough performance applications.
WATERWICH #ad - Please make sure the dimension, pressure and temperature range before purchase. 1. Constructed of premium material: the injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line.
Maximum working pressurepsi : 2500psi. 2. Wide application:the 8an ptfe fuel line hose kit used for fuel injection hose, turbo oil feed and boost line, ls engine swap fuel line, vapor return line, EFI fuel line, carb fuel line, vacuum line, fuel return line, transmission oil cooler line, fuel supply line and other high temperature high pressure applications.3
Not recommended installation in corrosive environment, 8AN braided fuel line's service life will be influenced. Bursting pressurepsi : 8000psi. 4. Package included:the an8 nylon and stainless steel braided ptfe fuel injection line hose kit includes: 10pcs 8AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree. An8 ptfe tube fuel hose length: 16feet/5M, inner diameter: 13/32" 10
Mophorn #ad - Working temperature range: -40℉ to 350℉. With less volumetric expansion than the other tube. 20 pics hose end kit: each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends 8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees and 32.
8ft braided fuel line. Suit for various uses: fuel line widely used in the fuel system, motor oil & coolant, pump gas, alcohol-based fuels, cooler system, and pump.
Max working pressure 300psi. 8an standard dimension: this steel fuel line build as standard 8an size, with inside diameter 11. 11 mm/ 044 in, outside diameter 16. 2 mm/ 063 in. Superior oil fuel line: 8an fuel line kit is made of premium material, and pressure, features a lightweight nylon fiber outer braid over a durable rubber core to strengthen its durability. Fitting professionally to manifest its best performance.
Top10 Racing #ad - Before buying, make sure that the pressure and temperature range are suitable for your application. Reliable material: the fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance.
The outer diameter of the hose: 067 inches 17. 02 mm. Application: universal fuel line hose, and air for automobiles or marine engines, coolant, alcohol, lube, Such as fuel, ethanol, most suitable for racing cars & motor racing bikes.
13 mm. The fuel line hose maximum working pressure of braided steel fuel hose psi: 500 psi. Bursting pressure psi: 2000psi. Perfect replacement: fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance. The outer nylon braid has excellent flame resistance and is safe to use. Operating temperature range: -40°F to 257°F -40°C to 129°C.
1. EVIL ENERGY
#adEVIL ENERGY 8AN PTFE Fuel Line Fitting Kit,E85 Nylon Braided Fuel Hose 10FT0.394Inch ID
#adMore information #ad
Id: 11/32". Applicable medium: all automotive fuels, lubricants, and coolants. Ptfe nylon braided fuel lines are ideal for high temperature and high pressure applications. Please measure before purchase! Includes: as shown in the picture. Working temperature range: -76℉ to 446℉ -60℃ to 230℃.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | EV00615AN8BB |
More information #ad
2. EVIL ENERGY
#adEVIL ENERGY 8AN PTFE Fuel Line Kit,AN8 E85 Nylon Braided Fuel Hose 16FT0.394Inch ID
#adBursting pressure: 8000psi. An8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications. Any problem you might have, please feel free to contact us via Amazon message. Evil energy provide 8an ptfe fuel hose fitting kit 3-month warranty.
More information #ad
Professional installation is highly recommended. Please measure before purchase! Includes: as shown in the picture. Applicable medium:8an e85 fuel line works with all automotive fuels, lubricants, and coolants. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Id: 13/32".| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Weight | 3.31 Pounds |
| Part Number | KT00654BB |
More information #ad
3. EVIL ENERGY
#adEVIL ENERGY 8AN PTFE Fuel Line Kit,E85 Nylon Braided Fuel Hose 20FT0.394Inch ID
#adMore information #ad
Max working pressure: 2500psi. Please measure before purchase! Includes: as shown in the picture. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Od: 0543inch. Length: 20 feet6m. Professional installation is highly recommended. Bursting pressure: 8000psi.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | EV01561AN8BB |
More information #ad
4. muge racing
#adMUGE RACING 20FT PTFE 8AN Nylon Braided Fuel Line Kit 3/8in Fuel Line Hose with Hose Ends and Hose Separator Clamp,FIT E85
#adWorking temperature range: -76℉ to 446℉ -60℃ to 230℃. Tips - professional installation is highly recommended. Please do not install it in a corrosive environment, which will affect the service life of braided fuel Line Hose. Bursting pressure psi: 10000psi.
More information #ad
Nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances. Please check the working pressure and temperature of your system before purchase. Wide application - fit e85!the muge racing black braided ptfe fuel line can be used as fuel injection hose, vapor return line, transmission oil cooler line, turbo oil feed and boost line, fuel return line, EFI fuel line, carb fuel line, ls engine swap fuel line, vacuum line, fuel supply line and other high temperature high pressure applications. A gift for cut hose -there is a free duct tape for you, make you easily cut hose without destroying the steel braided, before you cut the hose, you just need to wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut!.
| Brand | muge racing #ad |
| Manufacturer | muge racing #ad |
More information #ad
5. MOOSUN
#adMOOSUN 8AN 1/2" Nylon Braided CPE Fuel Line Hose Fitting Kit 20FT Black 11.12mm ID
#ad12mm044inch - outer Diameter: 17. 2mm068inch. Maximum working Pressure psi: 1000 psi. 1/2 braided nylon cpe fuel line can be used for a long time at -40℃ to 100℃ oil temperature.
More information #ad
Safety featuresnylon fiber and stainless steel braid 8an cover for excellent flexibility and resistance to abrasion. Polished and anodized surface provide the bright appearance and corrosion protection. Bursting pressure psi: 5000psi. Hose end fittings featuresdesigned for smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. 8an nylon braided hose can be used in brake system, oil return, pump gas, turbo cooler system and transmission system. Not fit e85. Not recommended installation in corrosive environment, 8an braided fuel line's service life will be influenced.
| Brand | MOOSUN #ad |
| Manufacturer | MOOSUN #ad |
| Height | 3.94 Inches |
| Length | 9.84 Inches |
| Weight | 3.5 Pounds |
| Width | 8.35 Inches |
| Part Number | MS-8AN20-10BB |
| Model | 20FT(6m) Fuel Line Hose |
More information #ad
6. SINTLY
#adSINTLY 8AN PTFE E85 Hose Braided Fuel Injection Line Fitting Kit AN8 16FT Nylon Stainless Steel Hose ID: 0.394inch
#adTips:please measure before purchase, make sure the pressure and temperature range is suitable for your application!Professional installation is highly recommended. Ptfe nylon braided fuel line for excellent flexibility and resistance to abrasion.
More information #ad
The 8an ptfe nylon braided fuel line kit includes:8an ptfe hose ends4 x straight, 2 x 45 degree, 2 x 90 degree，2 x 180 Degree and 8AN Black Nylon Braided fuel line Length: 16 Feet. Hose id: 13/32". Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Outer nylon braided has excellent inflaming and safer to use. Warranty: sintly offers 3-month warranty for the braided fuel line. 8an fuel line suitable for transmission oil cooler line, pump gas, fuel return line, carburetor fuel hose, turbo cooler line, hydraulic fluid, oil, coolant, oil feed line, vacuum, ls swap fuel line. Hose od: 0543inch.
| Brand | SINTLY #ad |
| Manufacturer | SINTLY #ad |
More information #ad
7. SecosAutoparts
#adSecosAutoparts US 8AN -8AN Black Nylon E85 PTFE Fuel Line 20FT 10 Fittings Hose Kit E85
#adThis braided black nylon fuel hose are specially designed to work in any automotive project. This hose provides you with unsurpassed levels of performance and reliability for your tough performance applications.
More information #ad
This hose is made of high-quality ptfe on the inside that gives them high chemical and heat resistance, Along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance. If you have any problems after receiving the product, we have 24-hour customer service, please contact us in time, and solve the problem for you as soon as possible!.| Brand | SecosAutoparts #ad |
| Manufacturer | SecosAutoparts #ad |
More information #ad
8. WATERWICH
#adWATERWICH 8AN 1/2" PTFE E85 Fuel Injection Line Hose Fitting Kit 16FT Nylon Braided Tube Stainless Steel Black
#adMaximum working pressurepsi : 2500psi. 2. Wide application:the 8an ptfe fuel line hose kit used for fuel injection hose, turbo oil feed and boost line, ls engine swap fuel line, vapor return line, EFI fuel line, carb fuel line, vacuum line, fuel return line, transmission oil cooler line, fuel supply line and other high temperature high pressure applications.3
More information #ad
3. Operating temperature can even use it at -76℉min or 446℉max -60℃ to 230℃. 5. Package included:the an8 nylon and stainless steel braided ptfe fuel injection line hose kit includes: 10pcs 8AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree. Not recommended installation in corrosive environment, 8AN braided fuel line's service life will be influenced. Bursting pressurepsi : 8000psi. 4. Package included:the an8 nylon and stainless steel braided ptfe fuel injection line hose kit includes: 10pcs 8AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree. An8 ptfe tube fuel hose length: 16feet/5M, inner diameter: 13/32" 10
| Brand | WATERWICH #ad |
| Manufacturer | WATERWICH #ad |
More information #ad
9. Mophorn
#adMophorn 8AN Fuel Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line
#ad8ft braided fuel line. Suit for various uses: fuel line widely used in the fuel system, motor oil & coolant, pump gas, alcohol-based fuels, cooler system, and pump.
More information #ad
Viscous materials will not cling to. Flexible & durable: the 8an hose oil line is constructed with a seamless extruded CPE synthetic rubber tube, abrasion, and corrosion, resisting extreme heat, providing minimum resistance to flow. Max working pressure 300psi. 8an standard dimension: this steel fuel line build as standard 8an size, with inside diameter 11. 11 mm/ 044 in, outside diameter 16. 2 mm/ 063 in. Superior oil fuel line: 8an fuel line kit is made of premium material, and pressure, features a lightweight nylon fiber outer braid over a durable rubber core to strengthen its durability. Fitting professionally to manifest its best performance.
| Brand | Mophorn #ad |
| Manufacturer | Mophorn #ad |
| Height | 4.72 Inches |
| Length | 17.32 Inches |
| Width | 10.24 Inches |
| Part Number | Mophorn Fuel Line Hose AN8 |
| Model | 32.8Ft BK |
More information #ad
10. Top10 Racing
#adNot for PTFE E85, 8AN Fuel Line Kit 20FT with Fittings Nylon Braided 1/2" 20 ft CPE Fuel Oil Hose
#adThe outer diameter of the hose: 067 inches 17. 02 mm. Application: universal fuel line hose, and air for automobiles or marine engines, coolant, alcohol, lube, Such as fuel, ethanol, most suitable for racing cars & motor racing bikes.
More information #ad
Package includes: 10pcs 8an rotating hose ends 4 straight, 2pcs 45 degrees, 1pcs gloves, 2pcs 90 degrees, 4pcs 8an hose separator clamp, 2pcs180 degrees, 1/2 braided fuel pipes length: 20 feet. Hose id: 044 inch 11. 13 mm. The fuel line hose maximum working pressure of braided steel fuel hose psi: 500 psi. Bursting pressure psi: 2000psi. Perfect replacement: fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance. The outer nylon braid has excellent flame resistance and is safe to use. Operating temperature range: -40°F to 257°F -40°C to 129°C.
| Brand | Top10 Racing #ad |
| Manufacturer | Top10 Racing #ad |
| Part Number | YGTZ-FT20AN8-10BK+JD1008-AN8-ST |
More information #ad
