Top 10 1/4 Male NPT x 1/4 Female Inverted Flare Adapter – Automotive Replacement Fuel System Fittings

As an Amazon Associate I earn from qualifying purchases.

1. Camco

#ad

Camco 59953 Propane Fitting, 1/4" Male NPT x 1/4" Female Inverted Flare

#adCamco #ad - Sold brass construction. 1/4" male npt x 1/4" female Inverted Flare. Connect a 1/4" inverted flare pigtail to a regulator with 1/4" female NPT ports. Easy to install. For use with some regulators.

Brand	Camco #ad
Manufacturer	Camco #ad
Height	0.9 Inches
Length	6 Inches
Weight	0.06 Pounds
Width	2 Inches
Part Number	59953
Model	59953
Warranty	N

2. Frienda

#ad

6 Pieces 1/4 Inch Male NPT x 1/4 Inch Female Inverted Flare Propane Fitting NPT Reducer Brass Female NPT Pipe Adapter Brass Bushing Reducer Brass Threaded Pipe Connector for Fuel, Oil Convert

#adFrienda #ad - Suitable for service: the propane tube connector allows you to connect the 1/4 inch reverse flare propane tail to a regulator with 1/4 inch female NPT port; The check valve only allows propane to flow in one direction, which can be applied with some propane regulators.

Easy installation: the brass hose adapter is quipped with 1/4 inch external thread joints, if you worry about safety problem, which are designed for easy installation, the adapter can be reinforced with sticky tape for extra tightness. What you will receive: the package comes with 6 pieces of female threaded pipe adapters, the quantity is sufficient for you to use and replace in daily life, you can also prepare them as reserve tools. Quality material: the thread pipe extension is made of brass, not easy to deform or break, with low permeability, and it is rust-resistant and corrosion-resistant, the material is sturdy and hard, giving you a long-term service.

Wide application: the npt fitting reducer can be applied in liquid petroleum, oil, power steering, piping, air, refrigeration, natural gas, fuel, hydraulic brakes, transmission cooler lines, but please note that it is not suitable for drinking water pipe connections.

Brand	Frienda #ad
Manufacturer	Frienda #ad
Part Number	CK-Frienda-14526

3. Allstar

#ad

Allstar ALL50121 1/8" NPT Male to 1/4" Brass Straight Inverted Flare Female Brake Line Adapter Fitting, Pack of 4

#adAllstar #ad - Adapts 1/8 npt male to 1/4 inverted flare female and is a straight style fitting. Brake line adapter fitting is made from quality brass. If you don't see what you need, Allstar also carries a large and wide selection of quality fittings for most automotive plumbing needs. Sold in one set of 4 pieces.

Brand	Allstar #ad
Manufacturer	Allstar Performance #ad
Height	0.8 Inches
Length	5 Inches
Weight	0.12 Pounds
Width	4.5 Inches
Part Number	ALL50121
Model	ALL50121
Warranty	90 day

4. Meichi

#ad

Brake Line Adapter, Brass Inverted Flare Fitting, Male Connector, 5/16" Tube OD x 1/4" NPT Male, 5pcs

#adMeichi #ad - For use with liquid petroleum lp and natural gas, refrigeration, trans-mission cooler lines, hydraulic brake, oil, lines, fuel, air, power steering. Adapts npt male end to flared tubing female end. Working pressure up to 2000psi depending on Tube O. D, will withstand burst pressure 5000psi with bundy-weld. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not for use in potable drinking water applications.

Brand	Meichi #ad
Manufacturer	Meichi #ad
Part Number	202*5B-5

5. Vis

#ad

5/16" Tube OD x 1/4" NPT Male Pack of 1, Vis Brass Inverted Flare Fitting, Adapter

#adVis #ad - Not for use in potable drinking water applications. Adapts npt male end to flared tubing female end. For use with liquid petroleum lp and natural gas, trans-mission cooler lines, air, lines, hydraulic brake, oil, refrigeration, fuel, power steering. Working pressure up to 2000psi depending on Tube O. D, will withstand burst pressure 5000psi with bundy-weld. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Brand	Vis #ad
Manufacturer	Vis #ad
Part Number	202

6. The Stop Shop

#ad

The Stop Shop Brake Line Adapter for 1/4" Tube, Female Inverted Flare, 7/16-24 to Male 1/8" Pipe Pack of 2

#adThe Stop Shop #ad - For 1/4" Tube. Adapts down to 1/8" pipe. Inverted Flare. 7/16-24 threads standard 1/4" tube fitting size.

Brand	The Stop Shop #ad
Manufacturer	The Stop Shop #ad
Part Number	A302

7. The Stop Shop

#ad

1/2-20 to Male 1/4" Pipe Thread Pack of 2, The Stop Shop Brake Line Adapter for 5/16" Tube, Female Inverted Flare

#adThe Stop Shop #ad - Inverted Flare on the female end. 1/2-20 threads standard 5/16" tube fitting size. Adapts to 1/4" pipe thread not 1/4" tubing. For 5/16" Tube.

Brand	The Stop Shop #ad
Manufacturer	The Stop Shop #ad
Weight	0.02 Pounds
Part Number	A305

8. Allstar

#ad

Allstar Performance ALL50120 1/8" NPT to 3/8-24" Adapter Fitting 4 Pack

#adAllstar #ad - Fit type: Vehicle Specific. 1/8 in npt male to 3/8-24 in Inverted Flare Female. 3/16 in Hardline. Set of 4. Brass.

Brand	Allstar #ad
Manufacturer	Allstar Performance #ad
Height	6 Inches
Length	54 Inches
Width	42 Inches
Part Number	ALL50120
Model	ALL50120
Warranty	90 day

9. Camco

#ad

Acme x 1/4" Male NPT, Camco 59843 20" Pigtail Propane Hose Connectors

#adCamco #ad - Rated for 200, 000 BTUs per hour. Built-in excess flow and thermal protection. Connect your camper's 1/4" npT inlet regulator to a 20lb or 30lb LP tank. Acme nut x 1/4" male NPT. 20" hose.

Brand	Camco #ad
Manufacturer	Camco #ad
Height	2.5 Inches
Length	6.38 Inches
Weight	0.15 Pounds
Width	7.75 Inches
Part Number	59843
Model	59843

10. Allstar

#ad

Allstar Performance ALL50125 1/8" NPT, 3/8-24" 90 Degree Adapter Fitting 4 Pack

#adAllstar #ad - 3/16 in Hardline. Set of 4. Fit type: Vehicle Specific. Country of Origin: United States. Package dimensions: 10668 l x 0254h x8. 382wcentimeters.

Brand	Allstar #ad
Manufacturer	Allstar Performance #ad
Height	7.2 Inches
Length	54 Inches
Weight	0.11 Pounds
Width	42 Inches
Part Number	ALL50125
Model	ALL50125
Warranty	90 day