Slash 58034-2 2wd Tires & 12mm Black Split Spoke Wheels /Fit Raptor Traxxas

Slash 58034-2 2wd Tires & 12mm Black Split Spoke Wheels /Fit Raptor Traxxas
#ad
Traxxas does not apply #ad - Gently removed from a new Traxxas 58034-2 Kit. Set of 4 traxxas slash 2wd spec tires & 12mm wheels, silver ring with black split spoke center/// They use 12mm hexes. Wheels are about 4-1/4" tall by 1-3/4" wide. They also fit the traxxas Raptor and other 2wd short course trucks that use 12mm wheel hex. Note if using on a 4wd slash the offset will be slightly different on the front.

. All new. Part #'s 5889 and 5890 in original packaging.

More information about Traxxas does not apply #ad

Traxxas 5116 5x11x4mm Replacement Precision Ball Bearings MR115-2RSBU 10

#ad
TRB RC #ad - Replaces part #: tamiya: 58041, 58056 traxxas: 4611, 5116 team Associated: 25239, 58354, 25618. Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022. Part sku# trb-mr115-2rs-bu chrome steel 52100 gcr15 abec 3 precision races hard chrome steel 52100 gcr15 ballsrubber seals to help fight dirt great quality & value for applications dimensions as follows: id, 25618 inner dia 5mm outer dia 11mm width 4mm, od, Width: 5x11x4mmThis Bearing Can be Used to Replace Part #:Axial: AXA1221Arrma: AR610019Losi: LOSA6947HPI: B022Tamiya: 58041, 58354, 58056Traxxas: 4611, 5116Team Associated: 25239, ID = 5mm OD = 11mm Width = 4mm.

Trb rc 10pcs 5x11x4mm precision high speed ball bearing, Chrome Steel 52100 GCr15 ABEC 3 Races with Rubber Seals Blue.

More information about TRB RC #ad


Similar products



Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue

#ad
Traxxas TRA5830 #ad - No matter where you want to race, on the track or off, you will experience superior handling and better corner speed. The low-cg conversion kit lowers the chassis, battery and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks including the Slash, Raptor and Robby Gordon Edition Dakar Slash.

Lowers chassis one inch 33mm/1. 3in. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022. Genuine Traxxas quality and precision. Low center of gravity enhances handling and increases cornering speed. Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models.

Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue #ad - . Replaces part #: tamiya: 58041, 58056 traxxas: 4611, 5116 team Associated: 25239, 58354, 25618. Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration.

Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Over 45% lower battery position.

More information about Traxxas TRA5830 #ad


Similar products



RPM Front Bearing Carrier 2WD Electric Slash, Rustler, Stampede, Bandit, and Nitro Slash, Black

#ad
HRP Distribution RPM80372 #ad - Includes chassis, nerf bars 2, battery hold-down; front and rear battery retainers, lower chassis, and front shock springs. Complete kit, no additional parts required. Improved performance, less rolling resistance and less maintenance are all characteristics you can expect from these carriers and larger bearings.

When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. Inner dia 5mm outer dia 11mm width 4mm, ID = 5mm OD = 11mm Width = 4mm. Over 45% lower battery position. Bearings are not included with these kits 4 bearings are needed for each kit.

RPM Front Bearing Carrier 2WD Electric Slash, Rustler, Stampede, Bandit, and Nitro Slash, Black #ad - Replaces part #: tamiya: 58041, 58354, 5116 team associated: 25239, 58056 traxxas: 4611, 25618. Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. Replaces weaker stock components. Low center of gravity enhances handling and increases cornering speed.

Lowers chassis one inch 33mm/1. 3in. Genuine Traxxas quality and precision. Proudly made in the USA.

More information about HRP Distribution RPM80372 #ad


Similar products



Traxxas 3785 Titan 12 Turn 550 Motor

#ad
Traxxas TRA3785 #ad - Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022. The titan 12t 550 motor's cooling fan pulls cool air through the motor to keep temperatures down. Genuine Traxxas quality and precision. Designed to increase durability.

Integrated cooling fan pulls cool air through the motor to keep temperatures down. Titan 12t motors are intended for use in single motor and single battery pack applications up to 8. 4 volts. This 550 size motor uses a 3mm output shaft. Replaces part #: tamiya: 58041, 58056 traxxas: 4611, 58354, 5116 Team Associated: 25239, 25618.

Traxxas 3785 Titan 12 Turn 550 Motor #ad - Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. Includes chassis, lower chassis, battery hold-down; front and rear battery retainers, nerf bars 2, and front shock springs. Complete kit, no additional parts required. Inner dia 5mm outer dia 11mm width 4mm, ID = 5mm OD = 11mm Width = 4mm.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. 550 motor size, 3mm output shaft.

More information about Traxxas TRA3785 #ad


Similar products



RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black

#ad
HRP Distribution RPM80382 #ad - Integrated Cooling Fan. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Designed to increase durability. Virtually maintenance-free operation and long-lasting performance. Lowers chassis one inch 33mm/1. 3in. Replaces weaker stock components. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models.

12 turn. Cooler running motors allow faster speeds, longer runtime, and extended motor life. Replaces weaker stock components. 550 motor size, 3mm output shaft. Replaces part #: tamiya: 58041, 5116 team associated: 25239, 58056 traxxas: 4611, 58354, 25618. Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls.

RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black #ad - In addition, durability, our front and rear bearing carriers are molded in black from RPM's killer blend of bulletproof nylons and are guaranteed not to break! Strength, and performance; Trademark characteristics put into every part RPM builds!. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022.

Rpm's new front and rear bearing carriers allow rustler, Slash & Bandit owners to install massive 5mm x 11mm bearings not included that will not only improve performance, Stampede, but will increase the time interval between maintenance periods. Low center of gravity enhances handling and increases cornering speed.

Integrated cooling fan pulls cool air through the motor to keep temperatures down.

More information about HRP Distribution RPM80382 #ad


Similar products



Traxxas 3637 Front Axles pair

#ad
Traxxas TRA3637 #ad - Lowers chassis one inch 33mm/1. 3in. Over 45% lower battery position. Replaces weaker stock components. Proudly made in the USA. Includes chassis, battery hold-down; front and rear battery retainers, lower chassis, nerf bars 2, and front shock springs. Complete kit, no additional parts required. This is the 3637 Front Axles 2 from Traxxas.

No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Low center of gravity enhances handling and increases cornering speed. Replaces part #: tamiya: 58041, 58056 traxxas: 4611, 58354, 5116 Team Associated: 25239, 25618.

Traxxas 3637 Front Axles pair #ad - Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. Proudly made in the USA. 12 turn. Integrated Cooling Fan. Front axles. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Replaces weaker stock components. Virtually maintenance-free operation and long-lasting performance.

More information about Traxxas TRA3637 #ad


Similar products



Traxxas Slash Raptor Dakar 2WD Pre-Roller Black Conversion Chassis 5822A

#ad
Traxxas #ad - Pulled from a brand new Traxxas 2WD Ford Raptor. This is for use on rc vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings. Pulled from a brand new 2WD Ford Raptor. Includes chassis, nerf bars 2, battery hold-down; front and rear battery retainers, lower chassis, and front shock springs.

Complete kit, no additional parts required. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Designed to increase durability. Virtually maintenance-free operation and long-lasting performance. Lowers chassis one inch 33mm/1. 3in. Comes as a pair. This is a brand new Traxxas 2WD Slash chassis. It includes everything seen in the pictures.

Traxxas Slash Raptor Dakar 2WD Pre-Roller Black Conversion Chassis 5822A #ad - Traxxas part numbers 5635, 2640, 5822a, 5837, 5636, 3638, 3644, 3639, 3631, 5823, 2555, 5827 and more. Proudly made in the USA. Front axles. Replaces worn or damaged parts.

More information about Traxxas #ad


Similar products



Traxxas 3678 Wheelie Bar Assembly for Traxxas 2WD Electric Vehicles

#ad
Traxxas TRA3678 #ad - It quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit and provides extra protection for the motor and transmission case. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Proudly made in the USA. Proudly made in the USA. Low center of gravity enhances handling and increases cornering speed. 550 motor size, 3mm output shaft. Integrated cooling fan pulls cool air through the motor to keep temperatures down. Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires.

Traxxas 3678 Wheelie Bar Assembly for Traxxas 2WD Electric Vehicles #ad - This product is made from high quality materials and designed for long-lasting performance. Comes as a pair. Inner dia 5mm outer dia 11mm width 4mm, ID = 5mm OD = 11mm Width = 4mm. This is a brand new Traxxas 2WD Slash chassis. It includes everything seen in the pictures. Replaces part #: tamiya: 58041, 5116 team associated: 25239, 58056 traxxas: 4611, 58354, 25618.

Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls.

More information about Traxxas TRA3678 #ad


Similar products



RPM Wide Front Bumper Black Rustler, Stampede, Bandit, Black

#ad
HRP Distribution RPM81162 #ad - Virtually maintenance-free operation and long-lasting performance. 550 motor size, 3mm output shaft. Inner dia 5mm outer dia 11mm width 4mm, ID = 5mm OD = 11mm Width = 4mm. Comes as a pair. Designed to increase durability. Replaces weaker stock components. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022.

Replaces weaker stock components. Lowers chassis one inch 33mm/1. 3in. Low center of gravity enhances handling and increases cornering speed. Rpm designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black to give it that stock-looking appearance, or in optional blue or green to match the line of Grave Digger and Son-Uva-Digger chassis and body paint schemes.

RPM Wide Front Bumper Black Rustler, Stampede, Bandit, Black #ad - This is a brand new Traxxas 2WD Slash chassis. It includes everything seen in the pictures. 12 turn. Replaces weaker stock components. Genuine Traxxas quality and precision. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, protection to the front end of the vehicle. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models.

More information about HRP Distribution RPM81162 #ad


Similar products



Traxxas 3654 Hex Wheel Hubs with 2.5 x 10mm Axle Pins pair

#ad
Traxxas TRA3654 #ad - Proudly made in the USA. Designed to increase durability. Wheel hubs, hex tall offset, Rustler/Stampede front 2/ axle pins 2. 5x10mm 2 use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires.

Inner dia 5mm outer dia 11mm width 4mm, ID = 5mm OD = 11mm Width = 4mm. Virtually maintenance-free operation and long-lasting performance. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. 550 size motor, 3mm output shaft. Replaces part #: tamiya: 58041, 5116 team associated: 25239, 58354, 58056 traxxas: 4611, 25618.

Traxxas 3654 Hex Wheel Hubs with 2.5 x 10mm Axle Pins pair #ad - Lubricated with grease, chrome steel 52100 gcr15 abEC 3 Precision Races, Hard Chrome Steel 52100 GCr15 Balls. Replaces part #: axial: axa1221 arrma: ar610019 losi: LOSA6947 HPI: B022. Replaces worn or damaged parts. Replaces weaker stock components. 550 motor size, 3mm output shaft. Comes as a pair. Pair of hex wheel hubs.

More information about Traxxas TRA3654 #ad


Similar products