Red Dirt Derby T-Tool Pinewood Derby Weight Placement Drilling Tool

Red Dirt Derby T-Tool Pinewood Derby Weight Placement Drilling Tool
#ad
Red Dirt Derby #ad - It is compatible with wooden car bodies up to 1. 75" wide. All red dirt derby products are expertly engineered for the Boy Scouts of America's Cub Scout Pinewood Derby race. The drilling tool is engineered to help you achieve the ideal balance and center of gravity necessary for maximum speed without the need for a drill press or complicated measurements.

Wooden block and drill bit not included. The red dirt derby rdd001 t-tool pinewood derby weight placement tool makes drilling perfectly sized weight holes simple. It is designed for use with 3/8" and 25/64" drill bits to fit standard sized tungsten pine derby car weights. Precisely drill tungsten weight holes for pinewood derby cars with ideal balance to achieve maximum speed.

Red Dirt Derby T-Tool Pinewood Derby Weight Placement Drilling Tool #ad - Holes can be drilled into all sides for precise weight placement. Eliminates need for a drill press and precision measurement tools. The t-tool attaches in seconds and can be secured with a standard clamp. For use with 3/8" and 25/64" drill bits. We have one goal - Speed. In the event that the tool is tight fitting onto the wooden block, the block can be narrowed slightly using sand paper until the tool does fit.

More information about Red Dirt Derby #ad

Pinewood Pro PRO Axle Inserter Guide from for Inserting axles in Pinewood Blocks

#ad
Pinewood Pro #ad - Axle guide rib is concave so your axle slides straight in. No need for extra tools or adjustments. Perfect spacing and straight insertion results in a faster car!One piece construction with built in wheel spacerDesigned and Engineered by the Pro's at Pinewood Pro, winning races for over 15 years. Pinewood pro's exclusive patent pending design is sure to help you easily insert your axles and get you on your way to the finish line.

Just hold the guide on your derby block by pressing your thumb into the small depression, insert your axle into the slot, then turn the block on its side and press down to slide the axle in. Advantageseasily align pinewood derby axles in a precut slot and get perfect wheel spacingAxle Guide rib is concave so your axles slide straight inThumb depression makes it easy to hold the Axle Guide in placePRO Axle Insert Guide includes a built-in wheel spacer to give you perfect spacing so your wheels don't bind or wobble.

Pinewood Pro PRO Axle Inserter Guide from for Inserting axles in Pinewood Blocks #ad - Thumb depression makes it easy to hold Axle Guide in place. Easily align derby car axle in pre-cut slot and get perfect wheel spacing with one-piece axle guide. One piece construction with built-in wheel spacer. The pro axle insert guide from pinewood pro helps you insert your axles into the pre-cut derby car axle slots on your BSA, Awana, Pine Car or any other wood derby car block.

Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble. No extra tools needed.

More information about Pinewood Pro #ad


Similar products



Tungsten Weights for Pinewood Derby Cars 3.25oz. Pinecar Power with Varied Sizes of Incremental Cylinders. Heavy with No Lead. by Rocket Box

#ad
Rocket Box Inc. #ad - Easily align derby car axle in pre-cut slot and get perfect wheel spacing with one-piece axle guide. Un-used weights are safely stored for next years Pinewood Derby. Thumb depression makes it easy to hold Axle Guide in place. One piece construction with built-in wheel spacer. It may be the difference of 1st place and 2nd.

The cylinders are 3/8" diameter which is a standard drill bit size. Package contains nine 3/8" diameter cylinders with chamfored edges for easy insertion and safe handling. No extra tools needed. Winners of pinewood derby competitions use tungsten weights. Installation is easy. Incremental sizes offer a more precise weight distribution.

Tungsten Weights for Pinewood Derby Cars 3.25oz. Pinecar Power with Varied Sizes of Incremental Cylinders. Heavy with No Lead. by Rocket Box #ad - Axle guide rib is concave so your axle slides straight in. This causes a greater build up of potential energy and have faster speeds on the track and finish line. Extra 3. 25 oz instead of 3. 0 oz. You can choose to cover them with wood putty or show them off. Simply drill a hole, insert weights and glue in place.

More information about Rocket Box Inc. #ad


Similar products



PRO Wheel Bore Polishing Kit with PRO Graphite for use on Pinewood Derby Wheels

#ad
Pinewood Pro, Asbury Graphite Mills, Inc. #ad - Thumb depression makes it easy to hold Axle Guide in place. One end of the cotton spear is stiff so you can chuck it in your drill while the other end is a soft, yet compact cotton swap that is perfectly sized for a pinewood derby wheel bore diameter. How to use the pro wheel bore polishing Kit Put some plastic polish on the cotton swab, insert the swab and polish away.

Package includes everything you need including an instruction sheet. Designed and engineered by the Pro's at Pinewood Pro. Winning races for over 20 years. Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble. 5 half ounce, 2 quarter ounce, and 2 eighth ounce weights Give your derby car more weight in the back for more speed.

PRO Wheel Bore Polishing Kit with PRO Graphite for use on Pinewood Derby Wheels #ad - One piece construction with built-in wheel spacer. Coat wheel bore to reduce friction and increase car speed further. Incremental sizes offer a more precise weight distribution. It may be the difference of 1st place and 2nd. The cylinders are 3/8" diameter which is a standard drill bit size. The pro wheel bore polishing kit from Pinewood Pro includes a special plastic polish and six cotton spears that are perfectly sized for your pinewood derby wheel bore.

More information about Pinewood Pro, Asbury Graphite Mills, Inc. #ad


Similar products



Pinewood Pro PRO Graphite - Dry Graphite Lube for use on Pinewood Derby Car Axles

#ad
Pinewood Pro, Asbury Graphite Mills, Inc. 030210 #ad - One piece construction with built-in wheel spacer. 5 half ounce, 2 quarter ounce, and 2 eighth ounce weights Give your derby car more weight in the back for more speed. Includes everything you need along with an instruction sheet. Coat wheel bore to reduce friction and increase car speed further. Simply drill a hole, insert weights and glue in place.

No sharp edges! no lead! these weights are beveled, non-toxic and child safe for handling. Surprisingly heavy! Tungsten weights have huge advantages in pinecar racing. Polish pinewood Derby Wheel Bore to remove imperfections. Axle guide rib is concave so your axle slides straight in. Minimizes pine car derby axle and wheel friction.

Pinewood Pro PRO Graphite - Dry Graphite Lube for use on Pinewood Derby Car Axles #ad - This causes a greater build up of potential energy and have faster speeds on the track and finish line. Extra 3. 25 oz instead of 3. 0 oz. It's 1. 7x heavier than lead which allows you to pack more weight in the back of your car. It may be the difference of 1st place and 2nd.

More information about Pinewood Pro, Asbury Graphite Mills, Inc. 030210 #ad


Similar products



Ruisita 3.25 Ounce Tungsten Pinewood Derby Weights Pinewood Derby Car Weights Tungsten Weights Cylinders Weights in Assorted Sizes to Make The Derby Car 3.25 Ounces

#ad
Ruisita #ad - Simply drill a hole, insert weights and glue in place. No sharp edges! no lead! these weights are beveled, non-toxic and child safe for handling. Surprisingly heavy! Tungsten weights have huge advantages in pinecar racing. Polish pinewood Derby Wheel Bore to remove imperfections. Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble.

Specification: Material: tungsten Total weight: 3. 25 ounces the product includes: 5 x 1/2 ounces weights tungsten 2 x 1/4 ounces Weights Tungsten 2 x 1/8 Ounces Weights Tungsten 1 x Clear plastic case Easily align derby car axle in pre-cut slot and get perfect wheel spacing with one-piece axle guide. Our tungsten weights are designed for Pinewood Derby competitions, and with which, your car's potential energy will be built up thus to cause a faster speed and help you to win the competition.

Ruisita 3.25 Ounce Tungsten Pinewood Derby Weights Pinewood Derby Car Weights Tungsten Weights Cylinders Weights in Assorted Sizes to Make The Derby Car 3.25 Ounces #ad - It's 1. 7x heavier than lead which allows you to pack more weight in the back of your car. Includes everything you need along with an instruction sheet. 5 half ounce, 2 quarter ounce, and 2 eighth ounce weights Give your derby car more weight in the back for more speed. Package includes: each package comes in pinewood derby weights tungsten of 3.

25 ounces of 3 sizes, including 9 pieces; they have no sharp edges, non-toxic, safe for kids to use. Sizes: 5 pieces of 1/2 ounce, and 2 of 1/8 ounce, 2 of 1/4 ounce, they can be freely combined as needed to allow your racing car to add weight at the back to increase speed.

More information about Ruisita #ad


Similar products



Pinewood Pete Pinewood Derby Car Sticker Set. Stripes, Numbers, Flags, Lights, and More.

#ad
Pinewood Pete #ad - Coat wheel bore to reduce friction and increase car speed further. Set your pinewood car apart from the pack with these agressive stickers. Each set of pinewood derby weights tungsten was equipped with a transparent plastic box with the size of 2. 8 x 2 x 06 inch /7. 2 x 5. 2 x 1. 6 cm, easy for you to carry when you need them, also convenient for you to storage when not in use.

5 half ounce, 2 quarter ounce, and 2 eighth ounce weights Give your derby car more weight in the back for more speed. Use to lubricate any surface to reduce friction and eliminate squeaks. Our tungsten weights are designed for Pinewood Derby competitions, and with which, your car's potential energy will be built up thus to cause a faster speed and help you to win the competition.

Pinewood Pete Pinewood Derby Car Sticker Set. Stripes, Numbers, Flags, Lights, and More. #ad - Puffer tube with pointed tip for easy application to axles and wheels. High performance specially made for pine derby cars and CO2 powered Dragsters. Custom blend of dry powdered graphite with molybdenum disulfide added for maximum speed. Each sticker is individual cut, no need to cut out with scissors. Stickers, not decals - decals can be frustrating and difficult to apply.

More information about Pinewood Pete #ad


Similar products



Pinewood Pro Tungsten Putty for Derby Car Weights - Easily Fine Tune Car Weight for Fastest Speed 1 Ounce

#ad
Pinewood Pro 020511 #ad - Thumb depression makes it easy to hold Axle Guide in place. This causes a greater build up of potential energy and have faster speeds on the track and finish line. Extra 3. 25 oz instead of 3. 0 oz. Place the exact amount of weight where you need it to optimize your center of gravity Add small amounts of weight so your car is exactly 5.

00 oz. Use to lubricate any surface to reduce friction and eliminate squeaks. Our tungsten weights are designed for Pinewood Derby competitions, and with which, your car's potential energy will be built up thus to cause a faster speed and help you to win the competition. Maximize your car weight to get maximum speed at the finish line.

Pinewood Pro Tungsten Putty for Derby Car Weights - Easily Fine Tune Car Weight for Fastest Speed 1 Ounce #ad - Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble. Quality - tungsten putty is a non-hardening, moldable material made from tungsten powder and a polymer binder. Time saver - easy for fine-tuning derby car weight and for making fishing weights. One piece construction with built-in wheel spacer.

Easily add or remove weight because tungsten putty stays soft and malleable. No time spent tediously cutting out each individual sticker. Made is usa - high quality stickers made by fellow Americans!

More information about Pinewood Pro 020511 #ad


Similar products



PRO Lathed, Graphite Coated - Pine Derby Speed Wheels

#ad
Pinewood Pro 050100 #ad - It's 1. 7x heavier than lead which allows you to pack more weight in the back of your car. Use to lubricate any surface to reduce friction and eliminate squeaks. A smooth, polished wheel bore increases car speed. Coat wheel bore to reduce friction and increase car speed further. High performance specially made for pine derby cars and CO2 powered Dragsters.

. It may be the difference of 1st place and 2nd. The cylinders are 3/8" diameter which is a standard drill bit size. No extra tools needed. Winners of pinewood derby competitions use tungsten weights. Quality - tungsten putty is a non-hardening, moldable material made from tungsten powder and a polymer binder. Time saver - easy for fine-tuning derby car weight and for making fishing weights.

PRO Lathed, Graphite Coated - Pine Derby Speed Wheels #ad - Thumb depression makes it easy to hold Axle Guide in place. Official BSA wheels. Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble. Graphite coated treads "friction-free". Our tungsten weights are designed for Pinewood Derby competitions, and with which, your car's potential energy will be built up thus to cause a faster speed and help you to win the competition.

Coned and squared hubs - reduces friction on car body.

More information about Pinewood Pro 050100 #ad


Similar products



Ruisita 3.25 Ounce Tungsten Pinewood Derby Weights 4 Sizes Pinewood Derby Car Weights Tungsten Weights Cylinders Weights 3.25 Ounces

#ad
Ruisita #ad - Quality - tungsten putty is a non-hardening, moldable material made from tungsten powder and a polymer binder. Time saver - easy for fine-tuning derby car weight and for making fishing weights. Incremental sizes offer a more precise weight distribution. Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble.

Minimizes pine car derby axle and wheel friction. Puffer tube with pointed tip for easy application to axles and wheels. Coned and squared hubs - reduces friction on car body. Our tungsten weights are designed for Pinewood Derby competitions, and with which, your car's potential energy will be built up thus to cause a faster speed and help you to win the competition.

Ruisita 3.25 Ounce Tungsten Pinewood Derby Weights 4 Sizes Pinewood Derby Car Weights Tungsten Weights Cylinders Weights 3.25 Ounces #ad - Flexible - tungsten putty weights are easily shaped and placed anywhere on your car. Universal - use as weight for derby cars or for fishing weights. Dense - small but heavy means you can add weight exactly where you need it to optimize center of gravity. Lathed treads, hubs, rims and inside tread are trued and precision tuned.

High performance specially made for pine derby cars and CO2 powered Dragsters. No extra tools needed. Winners of pinewood derby competitions use tungsten weights.

More information about Ruisita #ad


Similar products



Pinewood Pro Pine Derby Polished Axles with Angled Head to Minimize Friction - Speed Axles 4 axles

#ad
Pinewood Pro 040322 #ad - The set includes a total of 3. 25 ounces pinewood derby weights tungsten, non-toxic, with child-safe, 12 pieces in 4 different sizes, safe operation and no sharp edges. Size: 4 pieces of 1/2 ounce, 3 pieces of 1/4 ounce, 3 pieces of 1/8 ounce, 2 pieces of 1/16 ounce for you to choose and use according to your needs in order to get a good result in derby competition.

Each set comes in 1 transparent plastic box with the size of 2. 8 x 2 x 06 inch /7. 2 x 5. 2 x 1. 6 cm, easy for you to carry when you need them, also convenient for you to storage when not in use. Flexible - tungsten putty weights are easily shaped and placed anywhere on your car. Universal - use as weight for derby cars or for fishing weights.

Pinewood Pro Pine Derby Polished Axles with Angled Head to Minimize Friction - Speed Axles 4 axles #ad - Dense - small but heavy means you can add weight exactly where you need it to optimize center of gravity. Lathed treads, hubs, rims and inside tread are trued and precision tuned. Keep it simple with our peel and stick stickers. Easy peel & stick - our easy peel and stick stickers can be applied by your scout, keeping the spirit of the build in your child's hands.

No scissors needed - each sticker is individually die cut. 5 half ounce, 2 quarter ounce, and 2 eighth ounce weights Give your derby car more weight in the back for more speed.

More information about Pinewood Pro 040322 #ad


Similar products