Proline 118302 Blockade SC 2.2"/3.0" M3 Tires: Front/Rear, Soft 2

Proline 118302 Blockade SC 2.2"/3.0" M3 Tires: Front/Rear, Soft 2
HRP (Level 3 Products) PRO118302 - Blockade SC 2. 2 /3. 0 m3 soft tires 2/ slash revolutionary long lasting tread pattern generates exceptional forward and side bite on a variety of surfaces. Soft, re-usable and water-proof Closed Cell foam inserts included. Latest generation V2 SC wide carcass for increased contact patch.

More information about HRP (Level 3 Products) PRO118302

Pro-Line Racing 2715-04 Split Six 2.2"/3.0" Red/Black Bead-Loc Wheels

HRP (Level 3 Products) PRO271504 - Made in the united States, since 1982. Improved bead-loc, and all in one complete wheel package it's the Split Six. Note: pro-line bead-loc wheels work with Pro-Line tires only due to the inner webbing bead design. What's included:split six wheels 2 pcsbead-loc sleeves 2 pcsDie Cast Bead-Loc Rings 2 pcsStainless Steel Button Head Screws 12 pcsSPECS:Outer Diameter: 2.

2" 56mminner Diameter: 3. 0" 76mm one sided bead-Loc captures both sides of tire evenly. 3-piece design for easy install and no gluing of tires. Key featuresone sided bead-loc captures both sides of tire evenly3-piece design for easy install and no gluing of tiresWheel made from high-strength, durable DuPont nylon material2.

Pro-Line Racing 2715-04 Split Six 2.2"/3.0" Red/Black Bead-Loc Wheels - 2" front side for realistic look and 3. 0" back side for suspension clearancesame track width as stock wheelsA deep, sating black finish on all Split Six wheelsBead-Locs available in red or satin black finishOverviewHey there all you Slash fans check out Pro-Line's 2. 2" x 3. 0" bead-loc wheels for your Slash.

More information about HRP (Level 3 Products) PRO271504


Similar products



Pro-Line Racing 1180-02 Hole Shot 2.0 SC 2.2"/3.0" M3 Soft Tires

HRP (Level 3 Products) PRO118002 - Pro-Line Racing 1180-02 Hole Shot 2.0 SC 2.2"/3.0" M3 Soft Tires - Made in the united States, since 1982. Made in the united States, since 1982. Pro-line racing Hole Shot 2. 0 sc m3 tire 2: slh, sc10, blitz, pro118002 one sided bead-Loc captures both sides of tire evenly. Wider contact patch for improved traction in all conditions. Legendary multi-time World and National Championship winning design in all scales.

. 3-piece design for easy install and no gluing of tires.

More information about HRP (Level 3 Products) PRO118002


Similar products



Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue

Traxxas TRA5830 - Lowers chassis one inch 33mm/1. 3in. Includes chassis, nerf bars 2, battery hold-down; front and rear battery retainers, lower chassis, and front shock springs. Complete kit, no additional parts required. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. The low-cg conversion kit lowers the chassis, battery and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks including the Slash, Raptor and Robby Gordon Edition Dakar Slash.

Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue - The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration. 3-piece design for easy install and no gluing of tires. No matter where you want to race, on the track or off, you will experience superior handling and better corner speed. Genuine Traxxas quality and precision.

Made in the united States, since 1982. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. One sided bead-Loc captures both sides of tire evenly. Made in the united States, since 1982. Wider contact patch for improved traction in all conditions.

More information about Traxxas TRA5830


Similar products



Spektrum SR515 5-Channel 2.4GHz DSMR RC Sport Receiver: Surface

Horizon Hobby SPMSR515 - Low center of gravity enhances handling and increases cornering speed. Legendary multi-time World and National Championship winning design in all scales. Lowers chassis one inch 33mm/1. 3in. Made in the united States, since 1982. Plus, while binding, you have the choice of SmartSafe as well as preset "Gas" failsafe options.

All combined, spektrum gives you more in a basic receiver, so that you can drive with the highest sense of confidence possible and have more fun. Key features:compatible with all current spektrum surface radiosSimple push to bind - no bind plug required for operationTwo selectable failsafe modes:Gas Mode Failsafe allows drivers to preset the failsafe position of all available channelsSmartSafe failsafe drops throttle to lowest point and holds last command on remaining available channels5.

Spektrum SR515 5-Channel 2.4GHz DSMR RC Sport Receiver: Surface - 5ms frame rate, fastest dsmr frame rate availableStreamlined design in a lightweight hard-case with added antenna supportAdded antenna support and integrated antenna tube slot for vehicles that do not provide route for antenna installationIncludes:Spektrum 2. 4ghz sr515 dsmr 5-channel surface receiver, spmsr515specifications:Modulation: DSMR/DSM2Channels: FiveBand: 2.

4ghzvoltage: 3. 5-9. 6vrange: fullframe Rates: 22ms, 16. 5ms, 11ms and 5. 5msdimensions: 1.

More information about Horizon Hobby SPMSR515


Similar products



Traxxas 1985 PTFE-coated washers, 5x8x0.5mm Set of 20

Traxxas TRA1985 - Low center of gravity enhances handling and increases cornering speed. Push to bind - easy bind button eliminates the need for the old bind plug. This product is made from high quality materials and designed for lasting performance. Made in the united States, since 1982. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Traxxas 1985 PTFE-coated washers, 5x8x0.5mm Set of 20 - Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. One sided bead-Loc captures both sides of tire evenly. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Smartsafe failsafe and preset 'Gas Mode' Failsafe ready. Use with ball bearings. Ptfe-coated washers. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running.

Includes chassis, nerf bars 2, battery hold-down; front and rear battery retainers, lower chassis, and front shock springs. Complete kit, no additional parts required. Made in the united States, since 1982. Lowers chassis one inch 33mm/1.

More information about Traxxas TRA1985


Similar products



Team Associated 5422 30 Weight Silicone Shock Oil, 2-Ounce

HRP (Level 3 Products) ASC5422 - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. See your vehicle's User Manual for exact parts listings. Smartsafe failsafe and preset 'Gas Mode' Failsafe ready. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Team associated factory team silicone shock fluid, 30Wt 350 cSt 2oz, ASC5422 One sided bead-Loc captures both sides of tire evenly.

Use with ball bearings. Compact, full-range 5-Ch receiver ideal for nearly any radio control car or truck model. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position. Wider contact patch for improved traction in all conditions. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Team Associated 5422 30 Weight Silicone Shock Oil, 2-Ounce - . Includes chassis, battery hold-down; front and rear battery retainers, lower chassis, nerf bars 2, and front shock springs. Complete kit, no additional parts required. Made in the united States, since 1982. 3-piece design for easy install and no gluing of tires. Streamlined design in a lightweight hard-case.

More information about HRP (Level 3 Products) ASC5422


Similar products



Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear

Traxxas TRA2388X - One sided bead-Loc captures both sides of tire evenly. 3-piece design for easy install and no gluing of tires. Lowers chassis one inch 33mm/1. 3in. This product is made from high quality materials and designed for long-lasting performance. Made in the united States, since 1982. Traxxas 2388x is a direct oem replacement differential for electric Bandits, Stampedes, Rustlers, and 2WD Slashes.

Complete planetary gear differential with steel ring gear and hardware. Ptfe-coated washers. Genuine Traxxas quality and precision. Use with ball bearings. It comes complete with all gears and hardware. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear - Made in the united States, since 1982. Includes chassis, battery hold-down; front and rear battery retainers, nerf bars 2, lower chassis, and front shock springs. Complete kit, no additional parts required. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

See your vehicle's User Manual for exact parts listings.

More information about Traxxas TRA2388X


Similar products



PROLINE 274603 F-11 2.2/3.0 Bead-Lock Wheels for Slash Rear, Red/Black

HRP Distribution PRO274603 - Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Replacement 5422 30wt silicone Shock Oil 2 Oz for select Associated vehicles. Ptfe-coated washers. Low center of gravity enhances handling and increases cornering speed. This product is made from high quality materials and designed for lasting performance.

Genuine Traxxas quality and precision. Pro-line Slash Rear offset wheel. Over 45% lower battery position. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

PROLINE 274603 F-11 2.2/3.0 Bead-Lock Wheels for Slash Rear, Red/Black - Includes chassis, lower chassis, battery hold-down; front and rear battery retainers, nerf bars 2, and front shock springs. Complete kit, no additional parts required. 5x8x05mm 20 Compact, full-range 5-Ch receiver ideal for nearly any radio control car or truck model. This product is made from high quality materials and designed for lasting performance.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Push to bind - easy bind button eliminates the need for the old bind plug.

More information about HRP Distribution PRO274603


Similar products



Pro-Line Racing 607002 Body Mount Thumbwasher Kit for Proline Body Mount Kits

HRP (Level 3 Products) PRO607002 - This product is made from high quality materials and designed for lasting performance. Secure-lock Caps 4 pcs. M4x12mm setscrews 4 pcs. O-rings 4 pcs. Made in the usA, since 2027. Legendary multi-time World and National Championship winning design in all scales. Lowers chassis one inch 33mm/1. 3in; over 45% lower battery position.

Precision OEM parts for great performance. 5x8x05mm 20 Smartsafe failsafe and preset 'Gas Mode' Failsafe ready. Made in the united States, since 1982. Made in the united States, since 1982. Pro-line racing body mount thumbwasher kit: Body Mount Kits, PRO607002 One sided bead-Loc captures both sides of tire evenly.

Pro-Line Racing 607002 Body Mount Thumbwasher Kit for Proline Body Mount Kits - Ptfe-coated washers. This product is made from high quality materials and designed for lasting performance. Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Complete planetary gear differential with steel ring gear and hardware. Low center of gravity enhances handling and increases cornering speed.

One sided bead-Lock captures both sides of tire evenly.

More information about HRP (Level 3 Products) PRO607002


Similar products



Tamiya 86005 Paint Spray, Black

Tamiya TAM86005 - Fits electric bandit, Stampede, Rustler, and Slash 2WD. Replaces worn or damaged parts. After curing apply another coat as necessary. Made in the united States, since 1982. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Smartsafe failsafe and preset 'Gas Mode' Failsafe ready.

Complete low center-of-Gravity chassis conversion kit for 2WD Slash models. Streamlined design in a lightweight hard-case. Includes chassis, nerf bars 2, battery hold-down; front and rear battery retainers, lower chassis, and front shock springs. Complete kit, no additional parts required. Outstanding full range capability and 5.

Tamiya 86005 Paint Spray, Black - 5ms capable DSMR technology. Tough 11-spoke wheel design. Pro-line Slash Rear offset wheel. This product is made from high quality materials and designed for lasting performance. Low center of gravity enhances handling and increases cornering speed. Over 45% lower battery position. Paint the body from the inside, keeping the can about 30cm from the surface.

More information about Tamiya TAM86005


Similar products