Moore Ideal Products 10115 17Mm Hex Adapter Kit, Traxxas Slash 4x4

Moore Ideal Products 10115 17Mm Hex Adapter Kit, Traxxas Slash 4x4
#ad
MIP MIP10115 #ad - Mip hex adapter used for standard 1/8th scale wheels on the Traxxas Slash/ Stampede/ Rustler/ Rally - 4WD. Mip hex adapter used for standard 1/8th scale wheels on the traxxas Slash/ Stampede/ Rustler/ Rally - 4WD features: tapered 17mm hex surface to ensure long wheel life and wear! Anodized to protect against dirt, debris, & chemicals.

1-step hex adapter kit with taper locking hex surfaces! Kit comes with steel bearing journal spacers to ensure long bearing life! 100% quality made in the USA. Manufactured of aircraft grade 7075-T6 aluminum, and anodized for protection against oxidation. This kit will work with both stock "pinned" Axles and all "keyed" Mip axles x-duty's or race Duty's Tapered 17mm hex surface to ensure long wheel life and wear!

Moore Ideal Products 10115 17Mm Hex Adapter Kit, Traxxas Slash 4x4 #ad - Anodized to protect against dirt, debris, & chemicals. Manufactured of aircraft grade 7075-T6 aluminum, and anodized for protection against oxidation. Kit comes with steel bearing journal spacers to ensure long bearing life! Genuine mip products, CNC machined in-house for highest precision.

More information about MIP MIP10115 #ad

Moores Ideal Products 10130 X-Duty CVD Kit for Rear Traxxas Slash/Slash 4x4

#ad
HRP Distribution MIP10130 #ad - This is the mip rear x-duty cVD Kit For the Traxxas Slash 4x4. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! Involute mip spline Technology for smoother telescoping action! . Systems such as Castle Creations "Monster Mamba" System. Mip "x-duty" cvd rear drives are designed with "High Voltage" systems in mind.

Made from high grade Carbon Steel and Hardened to perfection! .

More information about HRP Distribution MIP10130 #ad


Similar products



Moores Ideal Products 10132 X-Duty CVD Kit for FRT Traxxas Slash 4x4

#ad
HRP Distribution MIP10132 #ad - Involute mip spline Technology for smoother telescoping action! Made from high grade Carbon Steel and Hardened to perfection!5/8" diameter cvd joint with 3/32" Drive Pin for added strength!5/8" diameter cvd joint with 3/32" Drive Pin for added strength! . No more twisted stock traxxas Plastic axles, with this new X-Duty Upgrade they are up for just about anything.

Mip x-duty cvd drives are designed with a 5/8" diameter cvd joint with 3/32 drive pin for added strength, and of course MIP's durability tested Spline Technology for smoother telescoping action. And as always the x-duty are made from high grade heat treated Carbon Steel and designed and engineered right here in the USA!

Moores Ideal Products 10132 X-Duty CVD Kit for FRT Traxxas Slash 4x4 #ad - Made from high grade Carbon Steel and Hardened to perfection! Involute mip spline Technology for smoother telescoping action! Designed for those with a taste for speed and sheer power.

More information about HRP Distribution MIP10132 #ad


Similar products



Traxxas 6878 Slipper Clutch Complete

#ad
Traxxas TRA6878 #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! Made from high grade Carbon Steel and Hardened to perfection! Optional part #6893X can be used for high-power or heavy abuse applications.

The traxxas #6878 is a pre-assembled slipper clutch assembly for Traxxas 1/10 4x4 vehicles: Telluride, Rally, Slash 4x4, and Stampede 4x4. Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models. Involute mip spline Technology for smoother telescoping action! Involute mip spline Technology for smoother telescoping action!

Traxxas 6878 Slipper Clutch Complete #ad - The clutch assembly comes with a 54-T, 32P spur gear pre-installed. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! . Accepts #6893x optional bearing adapter for high-power applications. Pre-assembled with 54-T, 32-pitch spur gear installed. Made from high grade Carbon Steel and Hardened to perfection!

Replaces entire clutch assembly. This product is made from high quality materials and designed for long-lasting performance.

More information about Traxxas TRA6878 #ad


Similar products



Tekno RC 6855 Big Bone Center Driveshaft and Outdrives

#ad
HRP Distributor CA TKR6855 #ad - First off it's fat!  Yet it's still extremely lightweight. Replaces entire clutch assembly. Lightweight aluminum shaft, hardened steel outdrives. Made from high grade Carbon Steel and Hardened to perfection! . Accepts #6893x optional bearing adapter for high-power applications. Dog bone design will not bind, split, or bend like the stock unit.

Made from high grade Carbon Steel and Hardened to perfection! Pre-assembled with 54-T, 32-pitch spur gear installed. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. The tekno rc big bone driveshaft and outdrives for the Slash 4×4 and Stampede 4×4 solves the many issues associated with the stock center driveline.

Tekno RC 6855 Big Bone Center Driveshaft and Outdrives #ad - 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! Involute mip spline Technology for smoother telescoping action! Involute mip spline Technology for smoother telescoping action! Fat, big bone shaft is much stronger than stock. Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models.

5/8" diameter cvd joint with 3/32" Drive Pin for added strength! .

More information about HRP Distributor CA TKR6855 #ad


Similar products



Traxxas 1985 PTFE-coated washers, 5x8x0.5mm Set of 20

#ad
Traxxas TRA1985 #ad - Pre-assembled with 54-T, 32-pitch spur gear installed. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! This product is made from high quality materials and designed for lasting performance. This is the 1985 fiber Washers 5x8mm 20 from Traxxas. Fat, big bone shaft is much stronger than stock.

Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. Made from high grade Carbon Steel and Hardened to perfection! No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby.

Traxxas 1985 PTFE-coated washers, 5x8x0.5mm Set of 20 #ad - Made from high grade Carbon Steel and Hardened to perfection! Traxxas, truly the fastest name in Radio Control. 5x8x05mm 20 Replaces entire clutch assembly. Accepts #6893x optional bearing adapter for high-power applications. Use with ball bearings. Dog bone design will not bind, split, or bend like the stock unit.

Ptfe-coated washers.

More information about Traxxas TRA1985 #ad


Similar products



Traxxas 6882X Differential Gear Set

#ad
Traxxas TRA6882X #ad - Dog bone design will not bind, split, or bend like the stock unit. This product is made from high quality materials and designed for long-lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!

. Fat, big bone shaft is much stronger than stock. This product is made from high quality materials, and designed for lasting performance. This is for use on rc vehicles such as the Traxxas XO-1, consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Traxxas 6882X Differential Gear Set #ad - Made from high grade Carbon Steel and Hardened to perfection!5x8x05mm 20 Involute mip spline Technology for smoother telescoping action! Made from high grade Carbon Steel and Hardened to perfection! Gear set, differential output gears 2/ spider gears 2/ spider gear shaft, carrier support Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Ptfe-coated washers. Includes one spider gear shaft and one carrier support.

More information about Traxxas TRA6882X #ad


Similar products



MIP 99060 HW-SHSS/ M4 x .099 Pin Screw 4

#ad
MIP #ad - Use with ball bearings. Pre-assembled with 54-T, 32-pitch spur gear installed. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Involute mip spline Technology for smoother telescoping action! Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models. Dog bone design will not bind, split, or bend like the stock unit.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Ptfe-coated washers. Lightweight aluminum shaft, hardened steel outdrives. This product is made from high quality materials and designed for lasting performance. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength!

MIP 99060 HW-SHSS/ M4 x .099 Pin Screw 4 #ad - Accepts #6893x optional bearing adapter for high-power applications. Replaces entire clutch assembly. Made from high grade Carbon Steel and Hardened to perfection! Mip hw-shss m4 x. 099 pin screw 4, mip99060 made from high grade Carbon Steel and Hardened to perfection! Includes two output and two spider gears.

More information about MIP #ad


Similar products



Duratrax Pit Tech Deluxe Car Stand, Black, DTXC2369

#ad
Duratrax DTXC2369 #ad - Accepts #6893x optional bearing adapter for high-power applications. Involute mip spline Technology for smoother telescoping action! Convenient and sturdy workstation for many 1/8, 1/10 and 1/12 RC cars, trucks and buggies. Molded rubber inserts in the upper plate grip chassis securely. Built-in holes keep shocks handy when rebuilding.

Rotating plate allows access from all sides and dropped center accommodates uneven chassis bottoms. Easily accessible extra-large parts tray built right into the base. This product is made from high quality materials, and designed for lasting performance. This is for use on rc vehicles such as the Traxxas XO-1, consult your user's manual for exact parts listings.

Duratrax Pit Tech Deluxe Car Stand, Black, DTXC2369 #ad - Mip hw-shss m4 x. 099 pin screw 4, mIP99060 Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Dog bone design will not bind, split, or bend like the stock unit. This product is made from high quality materials and designed for lasting performance. Ptfe-coated washers.

5/8" diameter cvd joint with 3/32" Drive Pin for added strength! Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

More information about Duratrax DTXC2369 #ad


Similar products



RPM 73622 ESC Cage for Castle Mamba Monster X, Mamba Monster 2 and Traxxas MXL, Black

#ad
HRPAA RPM73622 #ad - 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! That’s not a problem with the RPM ESC Cage. 5/8" diameter cvd joint with 3/32" Drive Pin for added strength! Includes one spider gear shaft and one carrier support. While our esc cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – E-Maxx, E-Revo and Summit.

Replaces entire clutch assembly. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Involute mip spline Technology for smoother telescoping action! Tech notes: the rpm esc cage for the mamba monster 2 and mamba monster x series escs works with castle #010-0108-00, # 010-0145-00, # 010-0108-02, # 010-0108-01, # 010-0145-01 and # 010-0145-02 as well as the Traxxas MXL-6S ESC #3377.

RPM 73622 ESC Cage for Castle Mamba Monster X, Mamba Monster 2 and Traxxas MXL, Black #ad - Use with ball bearings. Includes two output and two spider gears. Made by rpm r/c products, a United States based company where resources are sourced from American producers. Fits the traxxas E-Maxx, E-Revo and Summit. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x.

With the stock traxxas esc, there’s no solid mount available when you need to remove the ESC fan, like when you’re running in the wet or in the snow.

More information about HRPAA RPM73622 #ad


Similar products



Bob Smith Industries BSI-130 Ultra-Cure Tire Glue, Clear

#ad
Bob Smith Industries Incorporated BSI-130 #ad - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. 5x8x05mm 20 Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Includes one spider gear shaft and one carrier support. Convenient and sturdy workstation for many 1/8, 1/10 and 1/12 RC cars, trucks and buggies.

Molded rubber inserts in the upper plate grip chassis securely. Built-in holes keep shocks handy when rebuilding. Rotating plate allows access from all sides and dropped center accommodates uneven chassis bottoms. Easily accessible extra-large parts tray built right into the base. Designed to increase durability.

Bob Smith Industries BSI-130 Ultra-Cure Tire Glue, Clear #ad - Steel construction. Involute mip spline Technology for smoother telescoping action! Ultimate r/c car tire glue. Ultra-cure is the best all-around tire glue on the market. It works will all types of rims and tires. Dog bone design will not bind, split, or bend like the stock unit. Fits the traxxas E-Maxx, E-Revo and Summit.

More information about Bob Smith Industries Incorporated BSI-130 #ad


Similar products