Milton Compact Digital Tire Inflator with Pressure Gauge S-530, Easy to Read 0.1 Display, 15" EPDM Rubber Hose, 255 PSI Max Pressure, Dual Head Air Chuck, 1/4" NPT PSI, kPa, Bar, and kg/cm2

Milton Compact Digital Tire Inflator with Pressure Gauge S-530, Easy to Read 0.1 Display, 15" EPDM Rubber Hose, 255 PSI Max Pressure, Dual Head Air Chuck, 1/4" NPT PSI, kPa, Bar, and kg/cm2
#ad
Milton Industries S-530 #ad - Protective rubber boot also included. Equipped: full-swivel Dual Head chuck & 15-inch hose Schrader valve. Specifications: - Display Resolution: 0 Featuring: 15” hose provides a safe working distance while inflating tires shorter casting gives the user more control while inflating Digital gage provides accurate, clear readings Dual Head chuck SKUs available for easy inflation of many tire styles including hard-to-reach dual wheels REPLACEABLE PARTS: Money saving replaceable Gauge and Valve cartridges available.

. That is why we shortened the body to reduce the weight for better in-use hand control. Milton’s stubby pneumatic inflator is equipped with a 360-degree swivel digital pressure gauge for easy viewing. Air inlet: 1/4" NPT. Simply better air | usa made & mechanic approved high quality & light-weight Compact Body We know the weight of most industrial, automotive tire inflators in today's market can be heavy and cause wrist fatigue.

Milton Compact Digital Tire Inflator with Pressure Gauge S-530, Easy to Read 0.1 Display, 15" EPDM Rubber Hose, 255 PSI Max Pressure, Dual Head Air Chuck, 1/4" NPT PSI, kPa, Bar, and kg/cm2 #ad - Highly-accurate: performance-tested and calibrated to provide a 0 Built-in backlight for better reading in low light areas plus 4 measurement ranges PSI, 0-18; kPa, 0-255; BAR, 0-18; kg/cm2, 0-1800.5"" dial size- 3 volt-batteries included 2 aaatrigger: plated steel thumb lever hose: 300 psi rated 1/4"" id x 15"" rubber w/ brass fittings Air inlet: 1/4"" NPT female, with M-StyleR Automotive/Industrial plug included Drive Safely: Maintaining proper tire pressures improves vehicle handling, reduces risk of tire failure, improves fuel economy and increases the life of your tires.

5" dial and 05 psi accuracy reading.

More information about Milton Industries S-530 #ad

Milton S-210 1/4" NPT M-Style Coupler and Plug Kit, 12-Piece

#ad
Milton S-210 #ad - Temperatures up to 250 degrees F. Quality: durable brass couplers. This collection of couplers and plugs: - Will interchange with all manufacturers who comply with the dimensional requirements of military specification MIL-C-4109. Easy push to connect. Maximum: 40 scfm. Case-hardened steel plugs, plated to resist rust and corrosion.

M-style kit includes: 2 female couplers, 8 male Plugs, and 2 Female Plugs. Milton s-210 m-style kwik-change coupler/plug air accessory kit includes a variety of couplers, plugs and fittings with a 1/4" basic flow size air handling capacity. Offer a maximum airflow of 40 standard cubic feet per minute. Offer a maximum of 300 pounds per square inch.

Milton S-210 1/4" NPT M-Style Coupler and Plug Kit, 12-Piece #ad - 1/4" npt. Milton s-210 m-style coupler and Plug Kit, 12-Piece This pneumatic 12-pc. Milton #715, #727, #728. Kit includes: 2 1/4" fnpt couplers 8 1/4" mnpt plugs 2 1/4" fnpt plugs singular milton item part #’s: #715 coupler 1/4" fnpT #727 plug 1/4" MNPT #728 plug 1/4" FNPT   Basic flow size: all 1/4" body size air fittings.

Milton m-style kwik change couplers are made of brass, while M-Style Kwik Change plugs are made of case-hardened steel and are plated to resist rust. Buna-N seals. Kwik-change: interchangeable/compatible with most manufacturers.

More information about Milton S-210 #ad


Similar products



Milton S-153 1/4" NPT Lever Style Blow Gun, Single

#ad
Milton Industries S153 #ad - 300 psi. Milton s-153 1/4" npt lever style blow Gun Basic flow size: all 1/4" body size air fittings. Made in USA. Milton #715, #727, #728. Maximum working pressure of 150 pounds per square inch. Temperatures up to 250 degrees F. Quality: durable brass couplers. 11. 4 standard cubic feet per minute at 100 pounds per square inch.

Easy push to connect. Maximum: 40 scfm. Buna-N seals. Kwik-change: interchangeable/compatible with most manufacturers. Case-hardened steel plugs, plated to resist rust and corrosion. M-style kit includes: 2 female couplers, 8 male Plugs, and 2 Female Plugs. 1/4" national pipe thread air inlet. 1/4" npt.

More information about Milton Industries S153 #ad


Similar products



Milton Industries S-976 United States Milton Dual Head Chuck Service Gauge

#ad
Milton Industries S-976 #ad - Made in USA. Made in USA. Milton precision engineered service gauges provide accurate, long life and trouble free performance. Dual chuck head service gauge has a maximum pressure of 160 PSI. Case-hardened steel plugs, plated to resist rust and corrosion. M-style kit includes: 2 female couplers, 8 male Plugs, and 2 Female Plugs.

. 300 psi. Easy push to connect. Maximum: 40 scfm. Milton #715, #727, #728. Maximum working pressure of 150 pounds per square inch. 1/4" national pipe thread air inlet. 1/4" npt. Measures 12 3/4". Precision seamless drawn tube. Hang-up loop. Plated brass tube and 4 sided nylon indicator bar. Buna-N seals. Kwik-change: interchangeable/compatible with most manufacturers.

Milton Industries S-976 United States Milton Dual Head Chuck Service Gauge #ad - Basic flow size: all 1/4" body size air fittings. 100% calibrated across all three PSI ranges before leaving the factory. Durable hot stamped, not pad printed indicator bar.

More information about Milton Industries S-976 #ad


Similar products



19mm, Cr-Mo Steel, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards - 3/4 Inch, 6mm - Sunex 3646, 3/8 Inch Drive Low Profile Impact Hex Driver Set, 16-Piece, SAE/Metric, 1/4 Inch

#ad
Sunex International 3646 #ad - 1/4" national pipe thread air inlet. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex. Cr-mo steel: provides the strength and flexibility to handle high torque impact tools. Solid one piece construction: Eliminates weak points and increases durability.

Low profile design: Access tight spaces. Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Heavy duty storage case: Convenient transport and storage. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability. 16 piece set.

19mm, Cr-Mo Steel, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards - 3/4 Inch, 6mm - Sunex 3646, 3/8 Inch Drive Low Profile Impact Hex Driver Set, 16-Piece, SAE/Metric, 1/4 Inch #ad - Temperatures up to 250 degrees F. Quality: durable brass couplers. Durable hot stamped, not pad printed indicator bar. Easy push to connect. Maximum: 40 scfm. This 3/8-inch drive, 16-piece sae and metriC set is forged from the finest Molybdenum alloy steel-the best choice for strength and durability. Milton #715, #727, #728.

Maximum working pressure of 150 pounds per square inch.

More information about Sunex International 3646 #ad


Similar products



OTC 6007 Lower Control Arm Prying Tool

#ad
OTC 6007 #ad - Case-hardened steel plugs, plated to resist rust and corrosion. M-style kit includes: 2 female couplers, 8 male Plugs, and 2 Female Plugs. Basic flow size: all 1/4" body size air fittings. Durable hot stamped, not pad printed indicator bar. Installing a ball joint on a lower control arm typically requires the effort of two people.

However with this tool and our No. Precision seamless drawn tube. Made in USA. With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job. Measures 12 3/4". Milton #715, #727, #728. Maximum working pressure of 150 pounds per square inch. 1/4" npt. Easy push to connect. Maximum: 40 scfm.

OTC 6007 Lower Control Arm Prying Tool #ad - Lifetime limited warranty. 300 psi. 1/4" national pipe thread air inlet. Made in USA. Hang-up loop.

More information about OTC 6007 #ad


Similar products



Straight Foot Dual Head Chuck - Milton S986 Service Gauge

#ad
Milton Industries S-986 #ad - Temperatures up to 250 degrees F. Quality: durable brass couplers. Easy push to connect. Maximum: 40 scfm. Psi range is 10 psi to 160 PSI, in 2 lb. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex. Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.

Solid one piece construction: Eliminates weak points and increases durability. Low profile design: Access tight spaces. Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Heavy duty storage case: Convenient transport and storage. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability.

Straight Foot Dual Head Chuck - Milton S986 Service Gauge #ad - 16 piece set. Durable hot stamped, not pad printed indicator bar. Increments 80 to 1100 kPa in 20 kPa increments. Sae: 1/4" to 3/4". This dual head straight foot service gage is specifically designed for easily reaching inner duals. 10 pounds per square inch to 160 pounds per square inch in 2 lb. The nickel plated solid brass precision seamless drawn tube includes a durable, 4 sided nylon indicator bar that is not pad printed like the typical service gage available.

More information about Milton Industries S-986 #ad


Similar products



Milton Industries S-690 Single Milton 1/4" Fnpt Dual Head Air Chuck

#ad
Milton Industries S-690 #ad - 300 psi. Designed and manufactured to exacting standards, Milton air chucks have a maximum pressure of 150 PSI. Precision seamless drawn tube. 13 1/4" length. Plated brass tube and 4 sided nylon indicator bar. Designed/manufactured: to exacting standards. Milton #715, #727, #728. Maximum working pressure of 150 pounds per square inch.

1/4" npt. Case-hardened steel plugs, plated to resist rust and corrosion. M-style kit includes: 2 female couplers, 8 male Plugs, and 2 Female Plugs. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex. Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.

Milton Industries S-690 Single Milton 1/4" Fnpt Dual Head Air Chuck #ad - Solid one piece construction: Eliminates weak points and increases durability. Low profile design: Access tight spaces. Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Heavy duty storage case: Convenient transport and storage. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability.

16 piece set.

More information about Milton Industries S-690 #ad


Similar products



Astro Pneumatic Tool 3018 3.5" Digital Tire Inflator with Hose

#ad
Drake Off Road Tools 3018 #ad - Made in USA. 300 psi. Milton precision engineered service gages provide accurate, long life trouble free performance. Plated brass tube and 4 sided nylon indicator bar. Specifications: measuring range: 3 ~ 175psi, Units: PSI/BAR/KPA/KGF, Resolution: 01 psi, accuracy: 0 – 58 psi +/- 1. 2 psi, 59 – 174 psi +/- 1.

2 psi, working temperature: 32°f~104°f =0°c~ 40°c, power: 2 aaa batteries, Battery Lifetime: 560hr Basic flow size: all 1/4" body size air fittings.13 1/4" length. Lifetime limited warranty. Temperatures up to 250 degrees F. Quality: durable brass couplers. Measures 12 3/4". Easy push to connect. Maximum: 40 scfm.

Astro Pneumatic Tool 3018 3.5" Digital Tire Inflator with Hose #ad - Dual head chuck: Makes tire valves more accessible with the two heads for easier access. 10 pounds per square inch to 160 pounds per square inch in 2 lb. Designed/manufactured: to exacting standards. 11. 4 standard cubic feet per minute at 100 pounds per square inch.

More information about Drake Off Road Tools 3018 #ad


Similar products



Astro Pneumatic Tool 3018HSS Stainless Steel Hose with Fittings and Locking Chuck

#ad
Astro Pneumatic Tool Company 3018HSS #ad - Easy push to connect. Maximum: 40 scfm. Easy to change chuck system. Installing a ball joint on a lower control arm typically requires the effort of two people. Designed/manufactured: to exacting standards. Max psi: maximum air pressure of 150 pounds per square inch. Maximum accuracy and 01psi resolution for use with TPMS Tire Pressure Monitoring System.

Made in USA. This is a closed/Sealing-type air chuck for use on a compressed airline. With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job. Batteries Included. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex.

Astro Pneumatic Tool 3018HSS Stainless Steel Hose with Fittings and Locking Chuck #ad - Cr-mo steel: provides the strength and flexibility to handle high torque impact tools. Solid one piece construction: Eliminates weak points and increases durability. Low profile design: Access tight spaces. Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Heavy duty storage case: Convenient transport and storage.

Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability.

More information about Astro Pneumatic Tool Company 3018HSS #ad


Similar products



Milton 158 1/4" Lever Style Blow Gun and 2' Extension

#ad
Milton Industries 158 #ad - 1st position deflates, 2nd position inflates. Easy change Chuck System. Durable hot stamped, not pad printed indicator bar. Increments 80 to 1100 kPa in 20 kPa increments. Maximum accuracy and 01psi resolution for use with TPMS Tire Pressure Monitoring System. Buna-N seals. Kwik-change: interchangeable/compatible with most manufacturers.

Milton precision engineered service gages provide accurate, long life trouble free performance. Maximum working pressure of 150 pounds per square inch. Installing a ball joint on a lower control arm typically requires the effort of two people. Made in USA. Increments or 80 to 1100 kilopascal in 20 kilopascal increments.

Milton 158 1/4" Lever Style Blow Gun and 2' Extension #ad - 13 1/4" length. 300 psi. Has an air inlet of 1/4" npt and a maximum working pressure of 150 PSI. 4x the battery life and simplified battery installation. New 21" stainless braided hose for increased durability. 1/4" npt. Nozzle threads measure 7/16" -27.

More information about Milton Industries 158 #ad


Similar products