Extreme Max 3005.3729 24" Heavy-Duty Plastic Roll-In Dock / Boat Lift Wheel

Extreme Max 3005.3729 24" Heavy-Duty Plastic Roll-In Dock / Boat Lift Wheel
Extreme Max 3005.3729 - Works great with Smarte Jacks. 98" diameter axle opening. Designed with 8" wide treads to move in rough, soft or uneven terrain and a robust 24" diameter. This heavy-duty plastic wheel makes roll-in docks and boat lifts easier to move. 800 lbs. One-year. Plastic construction is perfect for constant submersion and exposure to harsh winter conditions without damage.

Extreme Max 3005.3729 24" Heavy-Duty Plastic Roll-In Dock / Boat Lift Wheel - 98" diameter shaft will not rust or corrode, so the wheel will always move freely. Designed to roll easily on rough, soft, or uneven terrain. 24" diameter with 8" treads and 1. 800 lbs. Capacity. The 1. Heavy-duty plastic wheel for roll-in docks and lifts. Capacity per wheel. Maintenance-free plastic will not rust on shaft.

Sold individually.

More information about Extreme Max 3005.3729

Quality Mark 28199 Smarte Jack - Pair

Quality Mark 28199 - Smarte jack makes moving your boat lift easy and quick. With this retractable wheel kit, efficiently move your boat lift or dock by yourself. Smarte jack is the perfect solution for boat owners and dock installers because it makes boat lifts easy to move and to level. Smarte jack makes a tough, multi-person job quick and efficient.

Quality Mark 28199 Smarte Jack - Pair - Fits on most boat lifts. 700 lb. If you want to level the lift, all you need is a wrench or cordless drill: Smarte Jack moves up and down 20 inches. Attachable wheels make your boat lift light and mobile. Boat owners can spend more time relaxing and dock installers can get more lifts in the water and make more money.

Capacity per Smarte Jack. One-time, easy installation. Made from aluminum. Fits 1-7/8" and 2" wheels hubs. Wheels set sold separately.

More information about Quality Mark 28199


Similar products



2" ID USS Flat Washers - Pack of 5

Crimp Supply - Steel with a zinc-clear finish. 2" inner diameter ID. Fits 1-7/8" and 2" wheels hubs. Uss washers have a larger ID and OD than their SAE washer counterparts. These uss flat washers are made of steel and have a zinc-clear finish that provides good corrosion and rust protection. 700 lb. Made of steel with a zinc-clear coating.

2" ID USS Flat Washers - Pack of 5 - Made from aluminum. Fits on most boat lifts. Thickness: 019''. Capacity per Smarte Jack. One-time, easy installation. 2" id uss flat washers. 4 1/2" outer diameter OD.

More information about Crimp Supply


Similar products



VeVe Inc. IWP-66; Boat Lift Installation Wheel Kit for Frames up to 4" Wide x 6" HighNote: Wheels Sold SEPERATLY!

VeVe Inc. - Fits on most boat lifts. Ve-ve inc. Axels with 2 ea. Marine products are americaN MADE products, not foreign imitations! Made from aluminum. 4 1/2" outer diameter OD. One-time, easy installation. 40 x 14" long steel pipe. Kit comes complete with all parts needed 4 ea. Mounting Plates, 2 ea. X 6" h. Note #2: kits are now supplied with 2 ea.

700 lb. Thickness: 019''. The product and fasteners are silver zinc plated for added protection against corrosion. American made. The cotter pins that are in some product pictures & schematics are only used on inside ends of Pipe Axles now. Fits 1-7/8" and 2" wheels hubs. Steel with a zinc-clear finish. 2" inner diameter ID.

VeVe Inc. IWP-66; Boat Lift Installation Wheel Kit for Frames up to 4" Wide x 6" HighNote: Wheels Sold SEPERATLY! - The iwp-66; "boat lift wheel mount kit" fits lift frames up to 4" wide x 3", 4", 5" or 6" high. Wheels sold seperATLY! Packaged and sold as kit to mount 2 ea. Quick & easy" disconnect pins pictured in DETAIL pictures for outside end of Pipe Axles.

More information about VeVe Inc.


Similar products



Premier Materials Heavy Duty Plastic Lift and Dock Wheels

Premier Materials Technology PMT24 - Self draining when removed. Steel with a zinc-clear finish. 2" inner diameter ID. Fits on most boat lifts. Thickness: 019''. 1 pair, boat lift installation wheel kit, for frames up to 4" W. Roll easily on all terrains. American made. Capacity per Smarte Jack. 4 1/2" outer diameter OD. One-time, easy installation. Constructed out of heavy duty plastic and will never wear.

Because they are made of heavy duty plastic, roll easily on all terrains, they will never wear out, won't rust on the shaft, will handle even the heaviest docks; and require no maintenance. Fits 1-7/8" and 2" wheels hubs. No maintenance & self-draining. X 6" h. Made from aluminum. Or 1-1/2" 1-7/8" O. D. Complete with mounting hardware to fit frames up to 4" wide x 3", 4", 5" or 6" high.

Premier Materials Heavy Duty Plastic Lift and Dock Wheels - Heavy duty aluminum Mount Plates with "Zinc Plated" steel axels. Designed for roll-in docks, sold individually.

More information about Premier Materials Technology PMT24


Similar products



VE-VE Inc. WD-55-16; 1 Pr Dock Wheel Axle Mount.

VeVe Inc. - 1 pair, boat lift installation wheel kit, for frames up to 4" W. Axle mounts are made of 2" x 154 w. Or 1-1/2" 1-7/8" O. D. Complete with mounting hardware to fit frames up to 4" wide x 3", 4", 5" or 6" high. Heavy duty aluminum Mount Plates with "Zinc Plated" steel axels. Designed for roll-in docks, sold individually.

American made. No maintenance & self-draining. But will work on 1-1/4" Pipe 1-5/8" O. D. Steel with a zinc-clear finish. 2" inner diameter ID. Plus $9. 50 per pair shipping. One-time, easy installation. Made from aluminum. 4 1/2" outer diameter OD. The wd-55-16; "dock wheel axle mounts" sold & PRICED AS 1 PAIR. Constructed out of heavy duty plastic and will never wear.

VE-VE Inc. WD-55-16; 1 Pr Dock Wheel Axle Mount. - Fits on most boat lifts. 700 lb.

More information about VeVe Inc.


Similar products



Dock Edge Dock & Boat Lift Wheel, 18", 1.98" Axle Shaft- Rotomold

Dock Edge DE90021F - Use for roll-in docks or boat lifts. One-time, easy installation. Constructed out of heavy duty plastic and will never wear. 700 lb. Roll easily on all terrains. Axle. Use for roll-in docks or boat lifts - all wheels accept a 1-7 ⁄8 inch 4, 8cm o. D. Axle. Kit complete with plates, axels and hardware for 1 pair of wheels SOLD SEPERATLY.

Works on wheels with hub holes for 1-1/4" pipe 1-5/8" O. D. Or 1-1/2" 1-7/8" O. D. Complete with mounting hardware to fit frames up to 4" wide x 3", 4", 5" or 6" high. Heavy duty aluminum Mount Plates with "Zinc Plated" steel axels. Designed for roll-in docks, sold individually. All wheels accept a 1-7⁄8 inch 4, 8cm O.

Dock Edge Dock & Boat Lift Wheel, 18", 1.98" Axle Shaft- Rotomold - D. Tough, rigid wheels offer stress, crack and impact resistance. Thickness: 019''. Capacity per Smarte Jack.

More information about Dock Edge DE90021F


Similar products



Patriot Docks 24 inch Plastic Dock Wheel

Patriot Dock 10821 - Capacity per Smarte Jack. Use for roll-in docks or boat lifts - all wheels accept a 1-7 ⁄8 inch 4, 8cm o. D. Tread surface width: 7 in. Hub size: 4 in. Patriot docks plastic dock wheel is universal, and can be applied to any application where there is a 1-1/2 in. Use to add wheels to an existing dock, replace the original wheels, or for boat lift applications.

Patriot Docks 24 inch Plastic Dock Wheel - American made. Tough, rigid wheels offer stress, crack and impact resistance. No maintenance & self-draining. Schedule 40 axle. Kit complete with plates, axels and hardware for 1 pair of wheels SOLD SEPERATLY. Works on wheels with hub holes for 1-1/4" pipe 1-5/8" O. D. 1 pair, boat lift installation wheel kit, for frames up to 4" W.

Structural strength: 700 lb. Dia x 7 3/4 in. Wheel strength: standard, 700lb 317, 5kg. 18 inch 45, 7cm dock wheel. Schedule 40 pipe.

More information about Patriot Dock 10821


Similar products



QUALITY MARK Boxed 28199 Smarte Jack-Pair

Quality Mark 28199 - Capacity per Smarte Jack. Smarte jack makes moving your boat lift easy and quick. No maintenance & self-draining. Wheel strength: standard, 700lb 317, 5kg. Kit complete with plates, axels and hardware for 1 pair of wheels SOLD SEPERATLY. Works on wheels with hub holes for 1-1/4" pipe 1-5/8" O. D. Use for roll-in docks or boat lifts - all wheels accept a 1-7 ⁄8 inch 4, 8cm o.

QUALITY MARK Boxed 28199 Smarte Jack-Pair - D. 4 1/2" outer diameter OD. Attachable wheels make your boat lift light and mobile. Roll easily on all terrains. If you want to level the lift, all you need is a wrench or cordless drill: Smarte Jack moves up and down 20 inches Made from aluminum. 1 pair, boat lift installation wheel kit, for frames up to 4" W.

Fits on most boat lifts. Axle. Fits 1-7/8" and 2" wheels hubs. Roll easily over virtually any Terrain and will not rust on the axle. Dia x 7 3/4 in. Fits 1-7/8" and 2" wheels hubs. Capacity per wheel.

More information about Quality Mark 28199


Similar products



PlayStar Dock Axle Kit for Use On Roll in Dock with Docks Wheels & 1 5/8" or 1 7/8" Pipe

PlayStar, Inc. Dropship PS 1198 - Tread surface width: 7 in. Hub size: 4 in. Capacity per Smarte Jack. Capacity per Smarte Jack. Capacity per wheel. 4 1/2" outer diameter OD. X 6" h. Made from aluminum. Fits 1-7/8" and 2" wheels hubs. American made. Dia x 7 3/4 in. Use for roll-in docks or boat lifts - all wheels accept a 1-7 ⁄8 inch 4, 8cm o. D. For use with 1-1/2 in.

PlayStar Dock Axle Kit for Use On Roll in Dock with Docks Wheels & 1 5/8" or 1 7/8" Pipe - Tough, rigid wheels offer stress, crack and impact resistance. L. For use on all types of dock frames. Use with playstar dock wheels ps 1334 purchased separately. Use 2 plastic dock wheels along with PN 10820 axle converters, and HD axle pipe to easily move your dock in and out of the water. Kit complete with plates, axels and hardware for 1 pair of wheels SOLD SEPERATLY.

Works on wheels with hub holes for 1-1/4" pipe 1-5/8" O. D. 18 inch 45, 7cm dock wheel. Pipe sold separately. Axle.

More information about PlayStar, Inc. Dropship PS 1198


Similar products



Dock Edge Howell Dock Hardware Stationary Side Leg Holder Kit with 2 Side Leg Holders and 4 Backer Plates

Dock Edge 85-230-F - Fits 1-7/8" and 2" wheels hubs. This stationary side leg corner kit includes 2 heavy duty Side Leg Holders and 4 backer plates. Fits 1-7/8" and 2" wheels hubs. 2 - heavy duty side leg holders 5" x 5" x 1/8". For use with 1-1/2 in. Fits on most boat lifts. Use 2 plastic dock wheels along with PN 10820 axle converters, and HD axle pipe to easily move your dock in and out of the water.

Axle. Capacity per Smarte Jack. For stationary dock. Or 1-1/2" 1-7/8" O. D. Complete with mounting hardware to fit frames up to 4" wide x 3", 4", 5" or 6" high. Heavy duty aluminum Mount Plates with "Zinc Plated" steel axels. Designed for roll-in docks, sold individually. Kit includes all hardware, bolts not included.

Dock Edge Howell Dock Hardware Stationary Side Leg Holder Kit with 2 Side Leg Holders and 4 Backer Plates - American made. Use for roll-in docks or boat lifts - all wheels accept a 1-7 ⁄8 inch 4, 8cm o. D. Steel with a zinc-clear finish. 2" inner diameter ID.

More information about Dock Edge 85-230-F


Similar products